怘€æ€˜€`3f<€fÀæøÀ̆ž?`??f?æžf<øž`??ð3ž<3ž<`<f<?˜à?˜æ?˜à0˜˜fÃðÀ€˜0†xð˜à؞Øàó̘àó˜xÌ𘘘03`Ì3ž<~<àžf<ðffü3f<<`<†žøž~<æžþž`?˜øfÃæàóæž?怘€à˜þž<`<†žøž~<˜æfÏàæžþž`?ø†<†žøž†øæžæž˜žfÏæàfü

U-Boot 2011.06-00001-ge147603 (Sep 07 2012 - 22:19:41)

OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Beagle xM Rev A
No EEPROM on expansion board
Die ID #2fa800001bf00000015739ea0702a01d
Hit any key to stop autoboot:  3  0 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # loady 0x81000000
## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
CSending: uImage-dtb.omap3-beagle-xm
Sending: 

Transfer complete
m - CRC mode, 8(SOH)/4677(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x004916d2 = 4789970 Bytes
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # setenv bootargs console=ttyO2,230400 vram=12M root=/dev/mmcblk0p2 rw mmcrootfstype=ext3 rootwait earlyprintk ignore_loglevel
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # bootm 0x81000000
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4789906 Bytes = 4.6 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.0-rc6-119021-g26bc420b (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Jan 28 22:27:16 MST 2015
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI OMAP3 BeagleBoard xM
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] cma: Reserved 16 MiB at 0x9e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 130816
[    0.000000] free_area_init_node: node 0, pgdat c0971880, node_mem_map dfa71000
[    0.000000]   Normal zone: 1152 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130816 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] PERCPU: Embedded 11 pages/cpu @df9f9000 s14912 r8192 d21952 u45056
[    0.000000] pcpu-alloc: s14912 r8192 d21952 u45056 alloc=11*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129664
[    0.000000] Kernel command line: console=ttyO2,230400 vram=12M root=/dev/mmcblk0p2 rw mmcrootfstype=ext3 rootwait earlyprintk ignore_loglevel
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 483384K/523264K available (6194K kernel code, 677K rwdata, 2360K rodata, 428K init, 8221K bss, 23496K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0862de0   (8556 kB)
[    0.000000]       .init : 0xc0863000 - 0xc08ce000   ( 428 kB)
[    0.000000]       .data : 0xc08ce000 - 0xc09776a8   ( 678 kB)
[    0.000000]        .bss : 0xc09776a8 - 0xc117ee10   (8222 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/331/600 MHz
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000061] OMAP clocksource: 32k_counter at 32768 Hz
[    0.001312] Console: colour dummy device 80x30
[    0.001373] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001403] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001403] ... MAX_LOCK_DEPTH:          48
[    0.001403] ... MAX_LOCKDEP_KEYS:        8191
[    0.001434] ... CLASSHASH_SIZE:          4096
[    0.001434] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001464] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001464] ... CHAINHASH_SIZE:          32768
[    0.001495]  memory used by lock dependency info: 5167 kB
[    0.001495]  per task-struct memory footprint: 1152 bytes
[    0.001525] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696)
[    0.097534] pid_max: default: 32768 minimum: 301
[    0.098083] Security Framework initialized
[    0.098327] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.098358] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102600] Initializing cgroup subsys memory
[    0.102691] Initializing cgroup subsys devices
[    0.102813] Initializing cgroup subsys freezer
[    0.102935] Initializing cgroup subsys blkio
[    0.103027] Initializing cgroup subsys perf_event
[    0.103149] CPU: Testing write buffer coherency: ok
[    0.104888] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.105041] Setting up static identity map for 0x805de950 - 0x805de9c0
[    0.109985] Brought up 1 CPUs
[    0.110015] SMP: Total of 1 processors activated (594.73 BogoMIPS).
[    0.110046] CPU: All CPU(s) started in SVC mode.
[    0.114196] devtmpfs: initialized
[    0.126159] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.208404] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.210754] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.320281] pinctrl core: initialized pinctrl subsystem
[    0.419799] NET: Registered protocol family 16
[    0.429046] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.432006] cpuidle: using governor ladder
[    0.432037] cpuidle: using governor menu
[    0.440368] Reprogramming SDRC clock to 331882352 Hz
[    0.452301] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
[    0.452362] platform 48310000.gpio: Driver omap_gpio requests probe deferral
[    0.455139] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.456542] OMAP GPIO hardware version 2.5
[    0.458557] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.461334] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.464233] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.467102] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[    0.470184] irq: no irq domain found for /ocp/pinmux@48002030 !
[    0.495178] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.498260] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
[    0.508728] No ATAGs?
[    0.508758] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.512542] OMAP DMA hardware revision 5.0
[    0.603759] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.605255] of_get_named_gpiod_flags: parsed 'gpio' property of node '/hsusb2_power_reg[0]' - status (-517)
[    0.605377] platform hsusb2_power_reg: Driver reg-fixed-voltage requests probe deferral
[    0.611206] SCSI subsystem initialized
[    0.612121] libata version 3.00 loaded.
[    0.613250] usbcore: registered new interface driver usbfs
[    0.613525] usbcore: registered new interface driver hub
[    0.613708] usbcore: registered new device driver usb
[    0.614440] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0)
[    0.614776] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral
[    0.621551] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
[    0.623168] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
[    0.624603] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz
[    0.631225] Switched to clocksource 32k_counter
[    0.850433] NET: Registered protocol family 2
[    0.852935] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.853210] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[    0.855499] TCP: Hash tables configured (established 4096 bind 4096)
[    0.855773] TCP: reno registered
[    0.855804] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    0.856140] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    0.857818] NET: Registered protocol family 1
[    0.859924] RPC: Registered named UNIX socket transport module.
[    0.859954] RPC: Registered udp transport module.
[    0.859954] RPC: Registered tcp transport module.
[    0.859985] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.862121] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.870269] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.870605] audit: initializing netlink subsys (disabled)
[    0.870971] audit: type=2000 audit(0.850:1): initialized
[    0.877227] VFS: Disk quotas dquot_6.5.2
[    0.877441] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.880737] NFS: Registering the id_resolver key type
[    0.881378] Key type id_resolver registered
[    0.881408] Key type id_legacy registered
[    0.881683] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.887634] io scheduler noop registered
[    0.887695] io scheduler deadline registered
[    0.887847] io scheduler cfq registered (default)
[    0.892730] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    0.893554] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    0.895050] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
[    0.904815] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.913665] omap_uart 4806a000.serial: no wakeirq for uart0
[    0.913726] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]'
[    0.914489] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    0.917114] omap_uart 4806c000.serial: no wakeirq for uart0
[    0.917144] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]'
[    0.917541] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    0.919708] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]'
[    0.920104] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    1.393737] console [ttyO2] enabled
[    1.398254] omap_uart 49042000.serial: no wakeirq for uart0
[    1.401397] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49042000[0]'
[    1.406860] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3
[    1.445739] brd: module loaded
[    1.467041] loop: module loaded
[    1.498168] twl 0-0048: PIH (irq 23) chaining IRQs 307..315
[    1.501831] twl 0-0048: power (irq 312) chaining IRQs 315..322
[    1.564697] twl4030_gpio twl4030-gpio: gpio (irq 307) chaining IRQs 323..340
[    1.569091] gpiochip_find_base: found new base at 492
[    1.572631] gpiochip_add: registered GPIOs 492 to 511 on device: twl4030
[    1.642272] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.657653] usbcore: registered new interface driver asix
[    1.660797] usbcore: registered new interface driver ax88179_178a
[    1.664398] usbcore: registered new interface driver cdc_ether
[    1.667846] usbcore: registered new interface driver smsc95xx
[    1.671234] usbcore: registered new interface driver net1080
[    1.674468] usbcore: registered new interface driver cdc_subset
[    1.677856] usbcore: registered new interface driver zaurus
[    1.681274] usbcore: registered new interface driver cdc_ncm
[    1.686065] usbcore: registered new interface driver cdc_wdm
[    1.689422] usbcore: registered new interface driver usb-storage
[    1.693054] usbcore: registered new interface driver usbtest
[    1.699707] mousedev: PS/2 mouse device common for all mice
[    1.704467] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
[    1.710693] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[    1.714721] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
[    1.723663] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input1
[    1.734985] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[    1.738739] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[    1.747009] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[    1.753051] i2c /dev entries driver
[    1.758331] Driver for 1-wire Dallas network protocol.
[    1.765777] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    1.772949] Driver 'mmcblk' needs updating - please use bus_type methods
[    1.778137] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]'
[    1.783203] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]'
[    1.832794] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/heartbeat[0]' - status (0)
[    1.839050] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/mmc[0]' - status (0)
[    1.845458] ledtrig-cpu: registered to indicate activity on CPUs
[    1.849456] usbcore: registered new interface driver usbhid
[    1.852569] usbhid: USB HID core driver
[    1.857452] oprofile: using arm/armv7
[    1.860443] TCP: cubic registered
[    1.862396] Initializing XFRM netlink socket
[    1.864898] NET: Registered protocol family 17
[    1.867431] NET: Registered protocol family 15
[    1.870330] Key type dns_resolver registered
[    1.873168] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    1.877075] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    1.880218] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    1.884033] omap2_set_init_voltage: unable to set vdd_core
[    1.905303] ThumbEE CPU extension supported.
[    1.907653] Registering SWP/SWPB emulation handler
[    1.910278] SmartReflex Class3 initialized
[    1.923522] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[    1.928802] of_get_named_gpiod_flags: parsed 'gpio' property of node '/hsusb2_power_reg[0]' - status (0)
[    1.937591] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0)
[    1.946136] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/user[0]' - status (0)
[    1.952545] input: gpio_keys as /devices/platform/gpio_keys/input/input2
[    1.959136] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    1.964355] sr_init: No PMIC hook to init smartreflex
[    1.967620] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    1.972198] smartreflex smartreflex.0: omap_sr_probe: smartreflex_mpu_iva: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    1.980346] smartreflex: probe of smartreflex.0 failed with error -61
[    1.984100] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    1.988525] smartreflex smartreflex.1: omap_sr_probe: smartreflex_core: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    1.996429] smartreflex: probe of smartreflex.1 failed with error -61
[    2.000061] sr_init: platform driver register failed for SR
[    2.069274] hsusb2_vbus: disabling
[    2.073181] VPLL2: disabling
[    2.075317] VUSB3V1: disabling
[    2.077484] VUSB1V8: disabling
[    2.079620] VUSB1V5: disabling
[    2.082183] VDAC: disabling
[    2.084381] VAUX3: disabling
[    2.090270] Waiting for root device /dev/mmcblk0p2...
[    2.265014] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.272674] mmc0: new high speed SDHC card at address 1234
[    2.278747] mmcblk0: mmc0:1234 SA04G 3.68 GiB 
[    2.289550]  mmcblk0: p1 p2
[    4.338348] kjournald starting.  Commit interval 5 seconds
[    4.342407] EXT3-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
[    4.749542] EXT3-fs (mmcblk0p2): using internal journal
[    4.762573] EXT3-fs (mmcblk0p2): recovery complete
[    4.765228] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    4.769256] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    4.782592] devtmpfs: mounted
[    4.786285] Freeing unused kernel memory: 428K (c0863000 - c08ce000)
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
[    5.922210] udevd (91): /proc/91/oom_adj is deprecated, please use /proc/91/oom_score_adj instead.
Synthesizing the initial hotplug events
[   14.173309] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Remounting root file system...
mount: according to mtab, /proc is already mounted on /proc

WARNING: Couldn't open directory /lib/modules/3.19.0-rc6-119021-g26bc420b: No such file or directory
FATAL: Could not open /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep.temp for writing: No such file or directory
root: mount: mount point /proc/bus/usb does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... modprobe: FATAL: Could not load /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep: No such file or directory

ifconfig: SIOCGIFFLAGS: No such device
modprobe: FATAL: Could not load /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep: No such file or directory

eth0      No such device

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep: No such file or directory

udhcpc: SIOCGIFINDEX: No such device
done.
Starting portmap daemon: portmap.
Tue Jul 22 00:18:00 UTC 2008
INIT: Entering runlevel: 5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1327: No soundcards found...
Starting Dropbear SSH server: [   21.526489] random: dropbear urandom read with 92 bits of entropy available
modprobe: FATAL: Could not load /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep: No such file or directory

dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting system message bus: dbus.
Starting syslogd/klogd: start-stop-daemon: lseek: Invalid argument
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Bluetooth subsystem: hcidmodprobe: FATAL: Could not load /lib/modules/3.19.0-rc6-119021-g26bc420b/modules.dep: No such file or directory

 hid2hci.

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: root
login[1410]: root login  on `ttyO2'

root@beagleboard:~# 
root@beagleboard:~# %% Start PM consolidated quick test


%% Preparation


root@beagleboard:~# 
root@beagleboard:~# mount -t sysfs none /sys
mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
root@beagleboard:~# 
root@beagleboard:~# mount -t debugfs none /debug
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# echo 0 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# [   28.651947] random: nonblocking pool is initialized

%% Baseline pm_debug count dump

cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1126,INA:0,ON:1127,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1126,INA:0,ON:1127,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:530,INA:596,ON:1127,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:530,INA:596,ON:1127,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (23)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo enabled >  $u/power/wakeup; done
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do echo auto >  $u/power/control; done

root@beagleboard:~#
%% Start retention double suspend/resume UART wakeup test

 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo auto >  $u/power/control; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/wakeup; cat $u/power/wakeup; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO3/power/wakeup
enabled
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/control; cat $u/power/control; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO3/power/control
auto
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   32.326141] PM: Syncing filesystems ... done.
[   33.969696] PM: Preparing system for mem sleep
[   34.014587] Freezing user space processes ... (elapsed 0.008 seconds) done.
[   34.027496] Freezing remaining freezable tasks ... (elapsed 0.004 seconds) done.
[   34.036407] PM: Entering mem sleep
[   34.038299] Suspending console(s) (use no_console_suspend to debug)
[   34.100036] PM: suspend of devices complete after 43.945 msecs
[   34.119201] PM: late suspend of devices complete after 19.073 msecs
[   34.139801] PM: noirq suspend of devices complete after 20.538 msecs
[   34.139984] Disabling non-boot CPUs ...
[   34.140045] Successfully put all powerdomains to target state
[   34.151245] PM: noirq resume of devices complete after 11.047 msecs
[   34.166229] PM: early resume of devices complete after 12.268 msecs
[   34.579437] PM: resume of devices complete after 412.963 msecs
[   34.614898] PM: Finishing wakeup.
[   34.616699] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1243,INA:0,ON:1244,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1243,INA:0,ON:1244,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:644,INA:599,ON:1244,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:644,INA:599,ON:1244,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   37.371398] PM: Syncing filesystems ... done.
[   38.638885] PM: Preparing system for mem sleep
[   38.645629] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   38.652221] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   38.659362] PM: Entering mem sleep
[   38.661315] Suspending console(s) (use no_console_suspend to debug)
[   38.710815] PM: suspend of devices complete after 32.226 msecs
[   38.729461] PM: late suspend of devices complete after 18.585 msecs
[   38.749023] PM: noirq suspend of devices complete after 19.500 msecs
[   38.749053] Disabling non-boot CPUs ...
[   38.749114] Successfully put all powerdomains to target state
[   38.759765] PM: noirq resume of devices complete after 10.528 msecs
[   38.774780] PM: early resume of devices complete after 12.207 msecs
[   39.156616] PM: resume of devices complete after 381.622 msecs
[   39.189971] PM: Finishing wakeup.
[   39.191802] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1347,INA:0,ON:1348,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1347,INA:0,ON:1348,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:744,INA:603,ON:1348,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:744,INA:603,ON:1348,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_susp
-sh: ./test_rootfs_access_nonexistent_file__ret_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention double suspend/resume UART wakeup test


%% Start retention dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1536,INA:0,ON:1537,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:28,INA:7,ON:36,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:35,INA:0,ON:36,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1536,INA:0,ON:1537,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:929,INA:607,ON:1537,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:929,INA:607,ON:1537,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (13)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_dyn
-sh: ./test_rootfs_access_nonexistent_file__ret_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention dynamic idle UART wakeup test


%% Start off-mode double suspend UART wakeup test

echo 1 > /debug/pm_debug/enable_off_mode
[   59.769500] omap3_pm_off_mode_enable: Core OFF disabled due to errata i583
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   60.785919] PM: Syncing filesystems ... done.
[   61.619476] PM: Preparing system for mem sleep
[   61.626220] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   61.632385] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   61.639373] PM: Entering mem sleep
[   61.641387] Suspending console(s) (use no_console_suspend to debug)
[   61.686218] PM: suspend of devices complete after 28.747 msecs
[   61.703063] PM: late suspend of devices complete after 16.784 msecs
[   61.720642] PM: noirq suspend of devices complete after 17.517 msecs
[   61.720672] Disabling non-boot CPUs ...
[   61.720703] Successfully put all powerdomains to target state
[   61.731170] PM: noirq resume of devices complete after 10.314 msecs
[   61.745117] PM: early resume of devices complete after 11.077 msecs
[   62.126861] PM: resume of devices complete after 381.561 msecs
[   62.159729] PM: Finishing wakeup.
[   62.161560] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:47,RET:1626,INA:0,ON:1674,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:29,INA:7,ON:37,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:1,RET:35,INA:0,ON:37,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:47,RET:1626,INA:0,ON:1674,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:1,RET:1059,INA:613,ON:1674,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:1,RET:1059,INA:613,ON:1674,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   64.951354] PM: Syncing filesystems ... done.
[   66.204803] PM: Preparing system for mem sleep
[   66.211486] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   66.217773] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   66.224822] PM: Entering mem sleep
[   66.226715] Suspending console(s) (use no_console_suspend to debug)
[   66.271636] PM: suspend of devices complete after 28.778 msecs
[   66.288330] PM: late suspend of devices complete after 16.632 msecs
[   66.305877] PM: noirq suspend of devices complete after 17.456 msecs
[   66.305908] Disabling non-boot CPUs ...
[   66.305938] Successfully put all powerdomains to target state
[   66.316101] PM: noirq resume of devices complete after 10.009 msecs
[   66.329681] PM: early resume of devices complete after 11.077 msecs
[   66.716339] PM: resume of devices complete after 386.352 msecs
[   66.749114] PM: Finishing wakeup.
[   66.750946] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:152,RET:1626,INA:0,ON:1779,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:30,INA:7,ON:38,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:2,RET:35,INA:0,ON:38,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:152,RET:1626,INA:0,ON:1779,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:2,RET:1161,INA:615,ON:1779,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:2,RET:1161,INA:615,ON:1779,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_susp
-sh: ./test_rootfs_access_nonexistent_file__off_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode double suspend UART wakeup test


%% Start off-mode dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:323,RET:1626,INA:0,ON:1950,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:54,INA:7,ON:62,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:26,RET:35,INA:0,ON:62,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:323,RET:1626,INA:0,ON:1950,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:26,RET:1304,INA:619,ON:1950,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:26,RET:1304,INA:619,ON:1950,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (13)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_dyn
-sh: ./test_rootfs_access_nonexistent_file__off_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode dynamic idle UART wakeup test


%% End PM consolidated quick test