Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################### done Bytes transferred = 4512751 (44dbef hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4512687 Bytes = 4.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-rc7-119240-ge36f014 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Feb 1 22:47:46 MST 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c08eb8c0, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 11 pages/cpu @cfc41000 s14912 r8192 d21952 u45056 [ 0.000000] pcpu-alloc: s14912 r8192 d21952 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 224312K/261120K available (5839K kernel code, 645K rwdata, 2212K rodata, 428K init, 8219K bss, 20424K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07e4e9c (8052 kB) [ 0.000000] .init : 0xc07e5000 - 0xc0850000 ( 428 kB) [ 0.000000] .data : 0xc0850000 - 0xc08f1628 ( 646 kB) [ 0.000000] .bss : 0xc08f1628 - 0xc10f8250 (8220 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000031] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns [ 0.000134] OMAP clocksource: timer1 at 13000000 Hz [ 0.001613] Console: colour dummy device 80x30 [ 0.001704] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001722] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001736] ... MAX_LOCK_DEPTH: 48 [ 0.001751] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001764] ... CLASSHASH_SIZE: 4096 [ 0.001778] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001792] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001806] ... CHAINHASH_SIZE: 32768 [ 0.001820] memory used by lock dependency info: 5167 kB [ 0.001835] per task-struct memory footprint: 1152 bytes [ 0.001877] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.095937] pid_max: default: 32768 minimum: 301 [ 0.096615] Security Framework initialized [ 0.096906] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096936] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.102030] Initializing cgroup subsys memory [ 0.102143] Initializing cgroup subsys devices [ 0.102287] Initializing cgroup subsys freezer [ 0.102422] Initializing cgroup subsys blkio [ 0.102556] Initializing cgroup subsys perf_event [ 0.102694] CPU: Testing write buffer coherency: ok [ 0.104835] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.105046] Setting up static identity map for 0x80588450 - 0x805884c0 [ 0.110989] Brought up 1 CPUs [ 0.111027] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.111045] CPU: All CPU(s) started in SVC mode. [ 0.116385] devtmpfs: initialized [ 0.129951] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.204582] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.206811] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.285679] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.304594] pinctrl core: initialized pinctrl subsystem [ 0.409750] NET: Registered protocol family 16 [ 0.419951] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.423508] cpuidle: using governor ladder [ 0.423561] cpuidle: using governor menu [ 0.433965] Reprogramming SDRC clock to 332000000 Hz [ 0.438064] In-band Error seen by USB_OTG at address 0 [ 0.438090] ------------[ cut here ]------------ [ 0.438134] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.438152] Modules linked in: [ 0.438187] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc7-119240-ge36f014 #1 [ 0.438204] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.438265] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.438301] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.438332] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.438361] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.438389] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.438426] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x60/0x1f4) [ 0.438455] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.438486] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.438514] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.438541] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.438570] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.438605] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.438626] Exception stack(0xce09bcc8 to 0xce09bd10) [ 0.438651] bcc0: 00000001 ce0990c8 00000000 ce098b40 60000153 ce014a60 [ 0.438676] bce0: ce014a60 00000000 0000001a 60000153 ce014a38 00000000 00000000 ce09bd10 [ 0.438696] bd00: c00838d4 c0586184 20000153 ffffffff [ 0.438725] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.438754] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.438783] [] (__setup_irq) from [] (request_threaded_irq+0xa8/0x134) [ 0.438810] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.438845] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.438874] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 0.438916] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.438945] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.438971] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.438998] [] (bus_probe_device) from [] (device_add+0x2ec/0x4e8) [ 0.439036] [] (device_add) from [] (of_platform_device_create_pdata+0xec/0x148) [ 0.439066] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.439095] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.439131] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.439159] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.439188] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.439218] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d8) [ 0.439259] [] (do_one_initcall) from [] (kernel_init_freeable+0x1f4/0x2cc) [ 0.439300] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.439331] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.439505] ---[ end trace d657399943fde2bb ]--- [ 0.440468] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.451001] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.452600] OMAP GPIO hardware version 2.5 [ 0.454746] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.458122] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.461295] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.464336] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.467689] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.483942] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.484843] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.497007] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.499832] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.660493] No ATAGs? [ 0.660544] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.664694] OMAP DMA hardware revision 4.0 [ 0.763833] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.765373] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.767023] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.768229] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.769418] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.770756] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.770826] platform wl12xx_vmmc2: Driver reg-fixed-voltage requests probe deferral [ 0.771078] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.772337] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/pinmux@48002030/pinmux_sb_t35_audio_amp, deferring probe [ 0.772397] platform audio_amp: Driver reg-fixed-voltage requests probe deferral [ 0.772631] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.773826] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.781295] SCSI subsystem initialized [ 0.782482] libata version 3.00 loaded. [ 0.783787] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.783856] platform hsusb1_phy: Driver usb_phy_generic requests probe deferral [ 0.783996] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.784047] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral [ 0.784932] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c1_pins, deferring probe [ 0.784988] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.787595] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.788055] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c3_pins, deferring probe [ 0.788118] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 0.795464] Switched to clocksource timer1 [ 1.043537] NET: Registered protocol family 2 [ 1.046511] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.046772] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.047916] TCP: Hash tables configured (established 2048 bind 2048) [ 1.048276] TCP: reno registered [ 1.048328] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.048653] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.050434] NET: Registered protocol family 1 [ 1.052964] RPC: Registered named UNIX socket transport module. [ 1.053002] RPC: Registered udp transport module. [ 1.053022] RPC: Registered tcp transport module. [ 1.053042] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.059647] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.069230] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.069729] audit: initializing netlink subsys (disabled) [ 1.070073] audit: type=2000 audit(1.060:1): initialized [ 1.077736] VFS: Disk quotas dquot_6.5.2 [ 1.078039] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.081793] NFS: Registering the id_resolver key type [ 1.082406] Key type id_resolver registered [ 1.082435] Key type id_legacy registered [ 1.082720] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.090387] io scheduler noop registered [ 1.090441] io scheduler deadline registered [ 1.090627] io scheduler cfq registered (default) [ 1.094635] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.095825] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.103569] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.113933] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.113994] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.114879] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.118772] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.118830] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.119288] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.121617] omap_uart 49020000.serial: no wakeirq for uart0 [ 1.121667] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.122104] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.524128] console [ttyO2] enabled [ 2.568017] brd: module loaded [ 2.593840] loop: module loaded [ 2.603191] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.638228] libphy: smsc911x-mdio: probed [ 2.642986] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 2.656632] smsc911x 2d000000.ethernet eth0: MAC Address: 3a:db:bf:62:0d:a7 [ 2.715157] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 2.721649] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 2.732104] libphy: davinci_mdio.0: probed [ 2.736592] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 2.745217] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 2.758918] mousedev: PS/2 mouse device common for all mice [ 2.764792] i2c /dev entries driver [ 2.771192] Driver 'mmcblk' needs updating - please use bus_type methods [ 2.780483] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.790956] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.845838] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.855512] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.866027] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 2.873708] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 2.881875] ledtrig-cpu: registered to indicate activity on CPUs [ 2.890517] oprofile: using arm/armv7 [ 2.895725] TCP: cubic registered [ 2.899270] Initializing XFRM netlink socket [ 2.903947] NET: Registered protocol family 17 [ 2.908818] NET: Registered protocol family 15 [ 2.914032] Key type dns_resolver registered [ 2.918950] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 2.926583] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 2.932636] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.939966] omap2_set_init_voltage: unable to set vdd_core [ 2.947512] PM: no software I/O chain control; some wakeups may be lost [ 2.954465] pm: Failed to request pm_wkup irq [ 2.959185] ThumbEE CPU extension supported. [ 2.963710] Registering SWP/SWPB emulation handler [ 2.968800] SmartReflex Class3 initialized [ 2.983765] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 2.996240] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.007527] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.019321] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.038382] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.050033] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.057008] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.066679] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.178432] davinci_emac davinci_emac.0: using random MAC addr: 0a:7a:56:9e:39:0e [ 3.190561] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.197279] sr_init: No PMIC hook to init smartreflex [ 3.203049] sr_init: platform driver register failed for SR [ 3.295771] ads7846-reg: disabling [ 3.299383] hsusb2_vbus: disabling [ 3.302954] hsusb1_vbus: disabling [ 3.312417] Waiting for root device /dev/mmcblk0p2... [ 3.329498] mmc0: new high speed SDHC card at address b368 [ 3.339114] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 3.351742] mmcblk0: p1 p2 [ 3.443396] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 3.456066] devtmpfs: mounted [ 3.460623] Freeing unused kernel memory: 428K (c07e5000 - c0850000) /bin/sh: can't access tty; job control turned off # # #