怘€æ€˜€`3f<€fÀæøÀ̆ž?`??f?æžf<øž`??ð3ž<3ž<`<f<?˜à?˜æ?À033憞˜àÌÃÀ˜à˜à˜žÃÃóÀÌóÀ˜33f€˜€0f<<~<àžf<Ã3††~0æ€fóÌ3ð3f<<`<†žøž~<æžþž`?˜øfÃæàóæž?怘€à˜þž<`<†žøž~<˜æfÏàæžþž`?ø†<†žøž†øæžæž˜žfÏæàfü

U-Boot 2011.06-dirty (Sep 04 2012 - 17:06:58)

OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  256 MiB
NAND:  512 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Beagle Rev C4
timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
Die ID #668c000400000000040398d31601f008
Hit any key to stop autoboot:  3  0 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # loady 0x81000000
## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
CSending: uImage-dtb.omap3-beagle
Sending: 

Transfer complete
zModem - CRC mode, 2(SOH)/4677(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x004913d6 = 4789206 Bytes
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # setenv bootargs console=ttyO2,230400n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # bootm 0x81000000
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4789142 Bytes = 4.6 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.0-rc7-119240-ge36f014 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Feb 4 21:37:04 MST 2015
[    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine model: TI OMAP3 BeagleBoard
[    0.000000] cma: Reserved 16 MiB at 0x8e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[    0.000000] PERCPU: Embedded 11 pages/cpu @cfc3c000 s14912 r8192 d21952 u45056
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64704
[    0.000000] Kernel command line: console=ttyO2,230400n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 223748K/261120K available (6194K kernel code, 677K rwdata, 2360K rodata, 428K init, 8221K bss, 20988K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0862de8   (8556 kB)
[    0.000000]       .init : 0xc0863000 - 0xc08ce000   ( 428 kB)
[    0.000000]       .data : 0xc08ce000 - 0xc09776e8   ( 678 kB)
[    0.000000]        .bss : 0xc09776e8 - 0xc117ee50   (8222 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[    0.000000] OMAP clockevent source: timer12 at 32768 Hz
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000061] OMAP clocksource: 32k_counter at 32768 Hz
[    0.001678] Console: colour dummy device 80x30
[    0.001770] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001800] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001800] ... MAX_LOCK_DEPTH:          48
[    0.001831] ... MAX_LOCKDEP_KEYS:        8191
[    0.001831] ... CLASSHASH_SIZE:          4096
[    0.001861] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001861] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001892] ... CHAINHASH_SIZE:          32768
[    0.001892]  memory used by lock dependency info: 5167 kB
[    0.001922]  per task-struct memory footprint: 1152 bytes
[    0.001953] Calibrating delay loop... 508.72 BogoMIPS (lpj=2543616)
[    0.110137] pid_max: default: 32768 minimum: 301
[    0.110809] Security Framework initialized
[    0.111145] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.111175] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.116851] Initializing cgroup subsys memory
[    0.116973] Initializing cgroup subsys devices
[    0.117126] Initializing cgroup subsys freezer
[    0.117279] Initializing cgroup subsys blkio
[    0.117431] Initializing cgroup subsys perf_event
[    0.117584] CPU: Testing write buffer coherency: ok
[    0.119903] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.120117] Setting up static identity map for 0x805decd0 - 0x805ded40
[    0.126678] Brought up 1 CPUs
[    0.126708] SMP: Total of 1 processors activated (508.72 BogoMIPS).
[    0.126708] CPU: All CPU(s) started in SVC mode.
[    0.132720] devtmpfs: initialized
[    0.148681] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[    0.255981] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.258972] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.371643] pinctrl core: initialized pinctrl subsystem
[    0.508178] NET: Registered protocol family 16
[    0.520416] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.524658] cpuidle: using governor ladder
[    0.524719] cpuidle: using governor menu
[    0.537078] Reprogramming SDRC clock to 332000000 Hz
[    0.552947] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
[    0.553039] platform 48310000.gpio: Driver omap_gpio requests probe deferral
[    0.558685] OMAP GPIO hardware version 2.5
[    0.576660] irq: no irq domain found for /ocp/pinmux@48002030 !
[    0.610778] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.626129] No ATAGs?
[    0.626190] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.631164] OMAP DMA hardware revision 4.0
[    0.757873] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.759796] platform hsusb2_power_reg: Driver reg-fixed-voltage requests probe deferral
[    0.767181] SCSI subsystem initialized
[    0.770019] usbcore: registered new interface driver usbfs
[    0.770385] usbcore: registered new interface driver hub
[    0.770690] usbcore: registered new device driver usb
[    0.772094] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral
[    0.780700] omap_i2c 48070000.i2c: bus 0 rev3.3 at 2600 kHz
[    0.783203] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz
[    0.785247] omap_i2c 48060000.i2c: bus 2 rev3.3 at 100 kHz
[    0.793853] Switched to clocksource 32k_counter
[    1.084808] NET: Registered protocol family 2
[    1.087829] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    1.088134] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[    1.089599] TCP: Hash tables configured (established 2048 bind 2048)
[    1.089935] TCP: reno registered
[    1.089996] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    1.090393] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    1.092437] NET: Registered protocol family 1
[    1.095306] RPC: Registered named UNIX socket transport module.
[    1.095336] RPC: Registered udp transport module.
[    1.095367] RPC: Registered tcp transport module.
[    1.095397] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.097808] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    1.108642] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.109100] audit: initializing netlink subsys (disabled)
[    1.109527] audit: type=2000 audit(1.080:1): initialized
[    1.117492] VFS: Disk quotas dquot_6.5.2
[    1.117797] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.121917] NFS: Registering the id_resolver key type
[    1.122589] Key type id_resolver registered
[    1.122619] Key type id_legacy registered
[    1.122985] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.131256] io scheduler noop registered
[    1.131317] io scheduler deadline registered
[    1.131500] io scheduler cfq registered (default)
[    1.137603] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    1.138671] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    1.140319] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36
[    1.150756] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.162811] omap_uart 4806a000.serial: no wakeirq for uart0
[    1.163818] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    1.167327] omap_uart 4806c000.serial: no wakeirq for uart0
[    1.167907] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    1.171234] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    1.575012] console [ttyO2] enabled
[    1.623077] brd: module loaded
[    1.651062] loop: module loaded
[    1.668395] twl 0-0048: PIH (irq 23) chaining IRQs 307..315
[    1.672058] twl 0-0048: power (irq 312) chaining IRQs 315..322
[    1.754394] twl4030_gpio twl4030-gpio: gpio (irq 307) chaining IRQs 323..340
[    1.778686] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.797393] usbcore: registered new interface driver asix
[    1.800628] usbcore: registered new interface driver ax88179_178a
[    1.804321] usbcore: registered new interface driver cdc_ether
[    1.807861] usbcore: registered new interface driver smsc95xx
[    1.811248] usbcore: registered new interface driver net1080
[    1.814666] usbcore: registered new interface driver cdc_subset
[    1.818145] usbcore: registered new interface driver zaurus
[    1.821594] usbcore: registered new interface driver cdc_ncm
[    1.826751] usbcore: registered new interface driver cdc_wdm
[    1.830200] usbcore: registered new interface driver usb-storage
[    1.833984] usbcore: registered new interface driver usbtest
[    1.841705] mousedev: PS/2 mouse device common for all mice
[    1.846618] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
[    1.852874] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[    1.856933] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
[    1.866485] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input1
[    1.878967] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[    1.883422] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[    1.892944] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[    1.899261] i2c /dev entries driver
[    1.905944] Driver for 1-wire Dallas network protocol.
[    1.914581] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    1.922424] Driver 'mmcblk' needs updating - please use bus_type methods
[    1.987335] ledtrig-cpu: registered to indicate activity on CPUs
[    1.991790] usbcore: registered new interface driver usbhid
[    1.994934] usbhid: USB HID core driver
[    2.000549] oprofile: using arm/armv7
[    2.003936] TCP: cubic registered
[    2.005828] Initializing XFRM netlink socket
[    2.008422] NET: Registered protocol family 17
[    2.010986] NET: Registered protocol family 15
[    2.014190] Key type dns_resolver registered
[    2.016967] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    2.020904] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    2.024169] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    2.027954] omap2_set_init_voltage: unable to set vdd_core
[    2.047882] ThumbEE CPU extension supported.
[    2.050292] Registering SWP/SWPB emulation handler
[    2.052947] SmartReflex Class3 initialized
[    2.079620] input: gpio_keys as /devices/platform/gpio_keys/input/input2
[    2.090423] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    2.095764] sr_init: No PMIC hook to init smartreflex
[    2.099243] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    2.104827] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    2.206298] hsusb2_vbus: disabling
[    2.209716] VUSB3V1: disabling
[    2.212219] VUSB1V8: disabling
[    2.214813] VUSB1V5: disabling
[    2.217590] VDAC: disabling
[    2.220184] VAUX3: disabling
[    2.228363] Waiting for root device /dev/mmcblk0p2...
[    2.243225] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.248138] mmc0: new SD card at address e624
[    2.254394] mmcblk0: mmc0:e624 SD01G 968 MiB 
[    2.265075]  mmcblk0: p1 p2
[    2.698181] kjournald starting.  Commit interval 5 seconds
[    2.708251] EXT3-fs (mmcblk0p2): using internal journal
[    2.802764] EXT3-fs (mmcblk0p2): recovery complete
[    2.805603] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    2.809753] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    2.821075] devtmpfs: mounted
[    2.826324] Freeing unused kernel memory: 428K (c0863000 - c08ce000)
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
[    4.248199] udevd (91): /proc/91/oom_adj is deprecated, please use /proc/91/oom_score_adj instead.
Synthesizing the initial hotplug events
[   15.311157] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Remounting root file system...
mount: according to mtab, /proc is already mounted on /proc

WARNING: Couldn't open directory /lib/modules/3.19.0-rc7-119240-ge36f014: No such file or directory
FATAL: Could not open /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep.temp for writing: No such file or directory
root: mount: mount point /proc/bus/usb does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

ifconfig: SIOCGIFFLAGS: No such device
modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

eth0      No such device

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

udhcpc: SIOCGIFINDEX: No such device
done.
Starting portmap daemon: portmap.
Tue Jul 22 00:18:00 UTC 2008
INIT: Entering runlevel: 5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1327: No soundcards found...
Starting Dropbear SSH server: [   24.103424] random: dropbear urandom read with 91 bits of entropy available
modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting system message bus: dbus.
Starting syslogd/klogd: start-stop-daemon: lseek: Invalid argument
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Bluetooth subsystem:modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory
 hcid
 hid2hci.

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: root
login[1422]: root login  on `ttyO2'

root@beagleboard:~# 
root@beagleboard:~# %% Start PM consolidated quick test


%% Preparation


root@beagleboard:~# 
root@beagleboard:~# mkdir -p /sys; mount -t sysfs none /sys
mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
root@beagleboard:~# 
root@beagleboard:~# mkdir -p /debug; mount -t debugfs none /debug
mount: none already mounted or /debug busy
mount: according to mtab, debugfs is already mounted on /debug
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# echo 0 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# 
%% Baseline pm_debug count dump

[   32.111389] random: nonblocking pool is initialized
cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:954,INA:0,ON:955,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:954,INA:0,ON:955,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:454,INA:500,ON:955,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:454,INA:500,ON:955,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (23)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo enabled >  $u/power/wakeup; done
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do echo auto >  $u/power/control; done

root@beagleboard:~#
%% Start retention double suspend/resume UART wakeup test

 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo auto >  $u/power/control; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/wakeup; cat $u/power/wakeup; done
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do ls -l $u/power/control; cat $u/power/control; done

-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/wakeup
enabled
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/control; cat $u/power/control; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/control
echo mem > /sys/power/state

auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/control
auto
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   35.168640] PM: Syncing filesystems ... done.
[   35.368255] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   35.376647] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   35.384399] Suspending console(s) (use no_console_suspend to debug)
[   35.428222] PM: suspend of devices complete after 32.043 msecs
[   35.439086] PM: late suspend of devices complete after 10.803 msecs
[   35.450897] PM: noirq suspend of devices complete after 11.749 msecs
[   35.451049] Disabling non-boot CPUs ...
[   35.451080] Successfully put all powerdomains to target state
[   35.457855] PM: noirq resume of devices complete after 6.683 msecs
[   35.466613] PM: early resume of devices complete after 7.202 msecs
[   35.647705] PM: resume of devices complete after 180.938 msecs
[   35.684234] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1027,INA:0,ON:1028,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1027,INA:0,ON:1028,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:500,INA:527,ON:1028,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:500,INA:527,ON:1028,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   37.749511] PM: Syncing filesystems ... done.
[   38.124603] Freezing user space processes ... (elapsed 0.005 seconds) done.
[   38.134552] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done.
[   38.144531] Suspending console(s) (use no_console_suspend to debug)
[   38.249389] PM: suspend of devices complete after 69.396 msecs
[   38.291351] PM: late suspend of devices complete after 41.839 msecs
[   38.334503] PM: noirq suspend of devices complete after 43.029 msecs
[   38.334594] Disabling non-boot CPUs ...
[   38.334655] Successfully put all powerdomains to target state
[   38.358581] PM: noirq resume of devices complete after 23.681 msecs
[   38.392303] PM: early resume of devices complete after 27.618 msecs
[   38.579376] PM: resume of devices complete after 186.676 msecs
[   38.618438] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1085,INA:0,ON:1086,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1085,INA:0,ON:1086,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:553,INA:532,ON:1086,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:553,INA:532,ON:1086,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_susp
-sh: ./test_rootfs_access_nonexistent_file__ret_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention double suspend/resume UART wakeup test


%% Start retention dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1218,INA:0,ON:1219,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:27,INA:5,ON:33,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:32,INA:0,ON:33,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1218,INA:0,ON:1219,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:684,INA:534,ON:1219,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:684,INA:534,ON:1219,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_dyn
-sh: ./test_rootfs_access_nonexistent_file__ret_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention dynamic idle UART wakeup test


%% Start off-mode double suspend UART wakeup test

echo 1 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   59.408630] PM: Syncing filesystems ... done.
[   59.784515] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   59.791381] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   59.799041] Suspending console(s) (use no_console_suspend to debug)
[   59.854095] PM: suspend of devices complete after 35.522 msecs
[   59.875030] PM: late suspend of devices complete after 20.843 msecs
[   59.896453] PM: noirq suspend of devices complete after 21.331 msecs
[   59.896484] Disabling non-boot CPUs ...
[   59.896545] Successfully put all powerdomains to target state
[   59.910034] PM: noirq resume of devices complete after 13.397 msecs
[   59.917419] PM: early resume of devices complete after 6.072 msecs
[   60.066192] PM: resume of devices complete after 148.620 msecs
[   60.100311] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:46,RET:1276,INA:0,ON:1323,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:1,RET:27,INA:5,ON:34,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:1,RET:32,INA:0,ON:34,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:46,RET:1276,INA:0,ON:1323,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:1,RET:773,INA:548,ON:1323,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:1,RET:773,INA:548,ON:1323,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   62.180847] PM: Syncing filesystems ... done.
[   62.554107] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   62.560943] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   62.568725] Suspending console(s) (use no_console_suspend to debug)
[   62.623931] PM: suspend of devices complete after 35.522 msecs
[   62.644836] PM: late suspend of devices complete after 20.843 msecs
[   62.666290] PM: noirq suspend of devices complete after 21.362 msecs
[   62.666320] Disabling non-boot CPUs ...
[   62.666381] Successfully put all powerdomains to target state
[   62.679840] PM: noirq resume of devices complete after 13.366 msecs
[   62.687225] PM: early resume of devices complete after 6.072 msecs
[   62.835662] PM: resume of devices complete after 148.284 msecs
[   62.869750] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:98,RET:1276,INA:0,ON:1375,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:2,RET:27,INA:5,ON:35,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:2,RET:32,INA:0,ON:35,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:98,RET:1276,INA:0,ON:1375,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:2,RET:819,INA:553,ON:1375,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:2,RET:819,INA:553,ON:1375,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_susp
-sh: ./test_rootfs_access_nonexistent_file__off_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode double suspend UART wakeup test


%% Start off-mode dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:218,RET:1276,INA:0,ON:1495,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:17,RET:31,INA:8,ON:57,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:21,RET:35,INA:0,ON:57,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:218,RET:1276,INA:0,ON:1495,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:22,RET:918,INA:554,ON:1495,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:22,RET:918,INA:554,ON:1495,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_dyn
-sh: ./test_rootfs_access_nonexistent_file__off_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode dynamic idle UART wakeup test


%% End PM consolidated quick test