怘€æ€˜€`3f<€fÀæøÀ̆ž?`??f?æžf<øž`??ð3ž<3ž<`<f<?˜à?Ì?Ã03††àÀÌà˜øÃÀÀ˜ø˜ž˜àÃóÀ˜àóÃ̘˜˜03à3f<<`<†žøž~<æžþž`?˜øfÃæàóæž?怘€à˜þž<`<†žøž~<˜æfÏàæžþž`?ø†<†žøž†øæžæž˜žfÏæàfü

U-Boot 2011.06-dirty (Sep 04 2012 - 17:06:58)

OMAP3530-GP ES3.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  256 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Beagle Rev C1/C2/C3
timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
Die ID #5cf200030000000004013f7902012010
Hit any key to stop autoboot:  2  0 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # loady 0x81000000
## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
CSending: uImage-dtb.omap3-beagle
Sending: 

Transfer complete
yzModem - CRC mode, 2(SOH)/4677(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x004913d6 = 4789206 Bytes
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # setenv bootargs console=ttyO2,230400n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # bootm 0x81000000
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4789142 Bytes = 4.6 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.0-rc7-119240-ge36f014 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Feb 4 21:37:04 MST 2015
[    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine model: TI OMAP3 BeagleBoard
[    0.000000] cma: Reserved 16 MiB at 0x8e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp )
[    0.000000] PERCPU: Embedded 11 pages/cpu @cfc3c000 s14912 r8192 d21952 u45056
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64704
[    0.000000] Kernel command line: console=ttyO2,230400n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 223748K/261120K available (6194K kernel code, 677K rwdata, 2360K rodata, 428K init, 8221K bss, 20988K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0862de8   (8556 kB)
[    0.000000]       .init : 0xc0863000 - 0xc08ce000   ( 428 kB)
[    0.000000]       .data : 0xc08ce000 - 0xc09776e8   ( 678 kB)
[    0.000000]        .bss : 0xc09776e8 - 0xc117ee50   (8222 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[    0.000000] OMAP clockevent source: timer12 at 32768 Hz
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000061] OMAP clocksource: 32k_counter at 32768 Hz
[    0.001678] Console: colour dummy device 80x30
[    0.001770] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001800] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001800] ... MAX_LOCK_DEPTH:          48
[    0.001831] ... MAX_LOCKDEP_KEYS:        8191
[    0.001831] ... CLASSHASH_SIZE:          4096
[    0.001861] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001861] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001892] ... CHAINHASH_SIZE:          32768
[    0.001892]  memory used by lock dependency info: 5167 kB
[    0.001922]  per task-struct memory footprint: 1152 bytes
[    0.001953] Calibrating delay loop... 469.40 BogoMIPS (lpj=2347008)
[    0.101379] pid_max: default: 32768 minimum: 301
[    0.102050] Security Framework initialized
[    0.102386] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102416] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.108093] Initializing cgroup subsys memory
[    0.108215] Initializing cgroup subsys devices
[    0.108367] Initializing cgroup subsys freezer
[    0.108520] Initializing cgroup subsys blkio
[    0.108673] Initializing cgroup subsys perf_event
[    0.108825] CPU: Testing write buffer coherency: ok
[    0.111297] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.111511] Setting up static identity map for 0x805decd0 - 0x805ded40
[    0.117889] Brought up 1 CPUs
[    0.117919] SMP: Total of 1 processors activated (469.40 BogoMIPS).
[    0.117919] CPU: All CPU(s) started in SVC mode.
[    0.123962] devtmpfs: initialized
[    0.140075] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[    0.247497] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.250457] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.361206] pinctrl core: initialized pinctrl subsystem
[    0.497619] NET: Registered protocol family 16
[    0.509948] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.514007] cpuidle: using governor ladder
[    0.514068] cpuidle: using governor menu
[    0.526458] Reprogramming SDRC clock to 332000000 Hz
[    0.542480] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
[    0.542541] platform 48310000.gpio: Driver omap_gpio requests probe deferral
[    0.548217] OMAP GPIO hardware version 2.5
[    0.565979] irq: no irq domain found for /ocp/pinmux@48002030 !
[    0.600158] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.615661] No ATAGs?
[    0.615722] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.620574] OMAP DMA hardware revision 4.0
[    0.746398] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.748443] platform hsusb2_power_reg: Driver reg-fixed-voltage requests probe deferral
[    0.755676] SCSI subsystem initialized
[    0.758636] usbcore: registered new interface driver usbfs
[    0.758972] usbcore: registered new interface driver hub
[    0.759246] usbcore: registered new device driver usb
[    0.760498] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral
[    0.769287] omap_i2c 48070000.i2c: bus 0 rev3.3 at 2600 kHz
[    0.771331] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz
[    0.773223] omap_i2c 48060000.i2c: bus 2 rev3.3 at 100 kHz
[    0.781768] Switched to clocksource 32k_counter
[    1.075775] NET: Registered protocol family 2
[    1.078826] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    1.079132] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[    1.080596] TCP: Hash tables configured (established 2048 bind 2048)
[    1.080993] TCP: reno registered
[    1.081115] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    1.081634] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    1.083709] NET: Registered protocol family 1
[    1.086425] RPC: Registered named UNIX socket transport module.
[    1.086456] RPC: Registered udp transport module.
[    1.086486] RPC: Registered tcp transport module.
[    1.086486] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.088928] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    1.099700] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.100158] audit: initializing netlink subsys (disabled)
[    1.100616] audit: type=2000 audit(1.120:1): initialized
[    1.108673] VFS: Disk quotas dquot_6.5.2
[    1.108978] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.113555] NFS: Registering the id_resolver key type
[    1.114257] Key type id_resolver registered
[    1.114288] Key type id_legacy registered
[    1.114654] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.122863] io scheduler noop registered
[    1.122924] io scheduler deadline registered
[    1.123107] io scheduler cfq registered (default)
[    1.129028] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    1.130065] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    1.131988] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36
[    1.142425] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.154479] omap_uart 4806a000.serial: no wakeirq for uart0
[    1.155242] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    1.158599] omap_uart 4806c000.serial: no wakeirq for uart0
[    1.159332] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    1.162933] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    1.568878] console [ttyO2] enabled
[    1.617248] brd: module loaded
[    1.645446] loop: module loaded
[    1.662811] twl 0-0048: PIH (irq 23) chaining IRQs 307..315
[    1.666473] twl 0-0048: power (irq 312) chaining IRQs 315..322
[    1.748596] twl4030_gpio twl4030-gpio: gpio (irq 307) chaining IRQs 323..340
[    1.773040] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.792053] usbcore: registered new interface driver asix
[    1.795288] usbcore: registered new interface driver ax88179_178a
[    1.798858] usbcore: registered new interface driver cdc_ether
[    1.802490] usbcore: registered new interface driver smsc95xx
[    1.805908] usbcore: registered new interface driver net1080
[    1.809265] usbcore: registered new interface driver cdc_subset
[    1.812835] usbcore: registered new interface driver zaurus
[    1.816284] usbcore: registered new interface driver cdc_ncm
[    1.821563] usbcore: registered new interface driver cdc_wdm
[    1.825042] usbcore: registered new interface driver usb-storage
[    1.828704] usbcore: registered new interface driver usbtest
[    1.836456] mousedev: PS/2 mouse device common for all mice
[    1.841278] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
[    1.847717] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[    1.851745] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
[    1.861175] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input1
[    1.874511] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[    1.878326] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[    1.887817] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[    1.894104] i2c /dev entries driver
[    1.900604] Driver for 1-wire Dallas network protocol.
[    1.909179] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    1.917144] Driver 'mmcblk' needs updating - please use bus_type methods
[    1.984436] ledtrig-cpu: registered to indicate activity on CPUs
[    1.988891] usbcore: registered new interface driver usbhid
[    1.992034] usbhid: USB HID core driver
[    1.997650] oprofile: using arm/armv7
[    2.000915] TCP: cubic registered
[    2.003021] Initializing XFRM netlink socket
[    2.005645] NET: Registered protocol family 17
[    2.008239] NET: Registered protocol family 15
[    2.011352] Key type dns_resolver registered
[    2.014251] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    2.018218] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    2.021453] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    2.025268] omap2_set_init_voltage: unable to set vdd_core
[    2.043304] PM: no software I/O chain control; some wakeups may be lost
[    2.049652] ThumbEE CPU extension supported.
[    2.052154] Registering SWP/SWPB emulation handler
[    2.054748] SmartReflex Class3 initialized
[    2.083587] input: gpio_keys as /devices/platform/gpio_keys/input/input2
[    2.090606] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    2.095855] sr_init: No PMIC hook to init smartreflex
[    2.099304] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    2.103912] smartreflex smartreflex.0: omap_sr_probe: smartreflex_mpu_iva: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    2.112182] smartreflex: probe of smartreflex.0 failed with error -61
[    2.115905] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    2.120330] smartreflex smartreflex.1: omap_sr_probe: smartreflex_core: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    2.128295] smartreflex: probe of smartreflex.1 failed with error -61
[    2.131988] sr_init: platform driver register failed for SR
[    2.232086] hsusb2_vbus: disabling
[    2.235626] VUSB3V1: disabling
[    2.238403] VUSB1V8: disabling
[    2.241088] VUSB1V5: disabling
[    2.245086] VDAC: disabling
[    2.248077] VAUX3: disabling
[    2.253234] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.260955] Waiting for root device /dev/mmcblk0p2...
[    2.264923] mmc0: new SD card at address 8001
[    2.270843] mmcblk0: mmc0:8001 SD02G 1.89 GiB 
[    2.280242]  mmcblk0: p1 p2
[    3.688903] kjournald starting.  Commit interval 5 seconds
[    3.694396] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
[    3.882354] EXT3-fs (mmcblk0p2): using internal journal
[    3.895416] EXT3-fs (mmcblk0p2): recovery complete
[    3.898284] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    3.903289] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    3.924285] devtmpfs: mounted
[    3.933135] Freeing unused kernel memory: 428K (c0863000 - c08ce000)
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
[    5.372894] udevd (91): /proc/91/oom_adj is deprecated, please use /proc/91/oom_score_adj instead.
Synthesizing the initial hotplug events
[   17.111328] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Remounting root file system...
mount: according to mtab, /proc is already mounted on /proc

WARNING: Couldn't open directory /lib/modules/3.19.0-rc7-119240-ge36f014: No such file or directory
FATAL: Could not open /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep.temp for writing: No such file or directory
root: mount: mount point /proc/bus/usb does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

ifconfig: SIOCGIFFLAGS: No such device
modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

eth0      No such device

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

udhcpc: SIOCGIFINDEX: No such device
done.
Starting portmap daemon: portmap.
Tue Jul 22 00:18:00 UTC 2008
INIT: Entering runlevel: 5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1327: No soundcards found...
Starting Dropbear SSH server: [   25.839752] random: dropbear urandom read with 125 bits of entropy available
modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting system message bus: dbus.
[   26.264892] random: nonblocking pool is initialized
Starting syslogd/klogd: start-stop-daemon: lseek: Invalid argument
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Bluetooth subsystem: hcidmodprobe: FATAL: Could not load /lib/modules/3.19.0-rc7-119240-ge36f014/modules.dep: No such file or directory

 hid2hci.

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: root
login[1415]: root login  on `ttyO2'

root@beagleboard:~# 
root@beagleboard:~# %% Start PM consolidated quick test


%% Preparation


root@beagleboard:~# 
root@beagleboard:~# mkdir -p /sys; mount -t sysfs none /sys
mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
root@beagleboard:~# 
root@beagleboard:~# mkdir -p /debug; mount -t debugfs none /debug
mount: none already mounted or /debug busy
mount: according to mtab, debugfs is already mounted on /debug
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# echo 0 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# 
%% Baseline pm_debug count dump

cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:970,INA:0,ON:971,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:970,INA:0,ON:971,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:522,INA:448,ON:971,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:522,INA:448,ON:971,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (23)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo enabled >  $u/power/wakeup; done
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do echo auto >  $u/power/control; done

root@beagleboard:~#
%% Start retention double suspend/resume UART wakeup test

 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo auto >  $u/power/control; done
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do ls -l $u/power/wakeup; cat $u/power/wakeup; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/wakeup; cat $u/power/wakeup; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/wakeup
enabled
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do ls -l $u/power/control; cat $u/power/control; done

-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/wakeup
enabled
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/control; cat $u/power/control; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/control
auto
echo mem > /sys/power/state

-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/control
auto
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   37.118713] PM: Syncing filesystems ... done.
[   37.699615] Freezing user space processes ... (elapsed 0.013 seconds) done.
[   37.717803] Freezing remaining freezable tasks ... (elapsed 0.009 seconds) done.
[   37.732635] Suspending console(s) (use no_console_suspend to debug)
[   37.888641] PM: suspend of devices complete after 119.323 msecs
[   37.931793] PM: late suspend of devices complete after 42.755 msecs
[   37.977966] PM: noirq suspend of devices complete after 46.020 msecs
[   37.978485] Disabling non-boot CPUs ...
[   37.978637] Successfully put all powerdomains to target state
[   38.004119] PM: noirq resume of devices complete after 25.207 msecs
[   38.038482] PM: early resume of devices complete after 28.015 msecs
[   38.250274] PM: resume of devices complete after 210.998 msecs
[   38.293579] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1061,INA:0,ON:1062,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1061,INA:0,ON:1062,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:602,INA:459,ON:1062,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:602,INA:459,ON:1062,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   40.270477] PM: Syncing filesystems ... done.
[   41.021179] Freezing user space processes ... (elapsed 0.005 seconds) done.
[   41.031097] Freezing remaining freezable tasks ... (elapsed 0.004 seconds) done.
[   41.040954] Suspending console(s) (use no_console_suspend to debug)
[   41.147613] PM: suspend of devices complete after 70.709 msecs
[   41.190673] PM: late suspend of devices complete after 42.938 msecs
[   41.234069] PM: noirq suspend of devices complete after 43.243 msecs
[   41.234130] Disabling non-boot CPUs ...
[   41.234222] Successfully put all powerdomains to target state
[   41.258453] PM: noirq resume of devices complete after 23.956 msecs
[   41.292968] PM: early resume of devices complete after 28.381 msecs
[   41.496093] PM: resume of devices complete after 202.728 msecs
[   41.534729] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1154,INA:0,ON:1155,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1154,INA:0,ON:1155,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:685,INA:469,ON:1155,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:685,INA:469,ON:1155,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_susp
-sh: ./test_rootfs_access_nonexistent_file__ret_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention double suspend/resume UART wakeup test


%% Start retention dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1373,INA:0,ON:1374,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:27,INA:8,ON:36,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:35,INA:0,ON:36,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1373,INA:0,ON:1374,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:899,INA:474,ON:1374,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:899,INA:474,ON:1374,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_dyn
-sh: ./test_rootfs_access_nonexistent_file__ret_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention dynamic idle UART wakeup test


%% Start off-mode double suspend UART wakeup test

echo 1 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   62.325866] PM: Syncing filesystems ... done.
[   62.680206] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   62.687133] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   62.694824] Suspending console(s) (use no_console_suspend to debug)
[   62.750305] PM: suspend of devices complete after 35.705 msecs
[   62.771392] PM: late suspend of devices complete after 21.026 msecs
[   62.792999] PM: noirq suspend of devices complete after 21.514 msecs
[   62.793029] Disabling non-boot CPUs ...
[   62.793090] Successfully put all powerdomains to target state
[   62.806243] PM: noirq resume of devices complete after 13.061 msecs
[   62.813659] PM: early resume of devices complete after 6.134 msecs
[   62.982421] PM: resume of devices complete after 168.609 msecs
[   63.016021] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:52,RET:1434,INA:0,ON:1487,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:1,RET:27,INA:8,ON:37,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:1,RET:35,INA:0,ON:37,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:52,RET:1434,INA:0,ON:1487,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:1,RET:1004,INA:481,ON:1487,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:1,RET:1004,INA:481,ON:1487,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   65.084259] PM: Syncing filesystems ... done.
[   65.839843] Freezing user space processes ... (elapsed 0.005 seconds) done.
[   65.850097] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done.
[   65.860229] Suspending console(s) (use no_console_suspend to debug)
[   65.967010] PM: suspend of devices complete after 70.648 msecs
[   66.010162] PM: late suspend of devices complete after 42.999 msecs
[   66.053497] PM: noirq suspend of devices complete after 43.212 msecs
[   66.053558] Disabling non-boot CPUs ...
[   66.053649] Successfully put all powerdomains to target state
[   66.064666] PM: noirq resume of devices complete after 10.925 msecs
[   66.072082] PM: early resume of devices complete after 6.103 msecs
[   66.222229] PM: resume of devices complete after 150.024 msecs
[   66.255828] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:122,RET:1434,INA:0,ON:1557,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:2,RET:27,INA:8,ON:38,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:2,RET:35,INA:0,ON:38,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:122,RET:1434,INA:0,ON:1557,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:2,RET:1069,INA:485,ON:1557,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:2,RET:1069,INA:485,ON:1557,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_susp
-sh: ./test_rootfs_access_nonexistent_file__off_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode double suspend UART wakeup test


%% Start off-mode dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.serial | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autosuspend_delay_ms; done

root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:329,RET:1434,INA:0,ON:1764,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:22,RET:31,INA:12,ON:66,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:26,RET:39,INA:0,ON:66,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:329,RET:1434,INA:0,ON:1764,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:28,RET:1243,INA:492,ON:1764,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:28,RET:1243,INA:492,ON:1764,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (12)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_dyn
-sh: ./test_rootfs_access_nonexistent_file__off_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode dynamic idle UART wakeup test


%% End PM consolidated quick test