Some observations:

Boot tests:

* CM-T3517: L3 in-band error with USB OTG during boot
  - Cause unknown; longstanding issue; does not occur on the 3517EVM

* 3517EVM & CM-T3517: boot hangs               
  - Probably due to the use of NFS root; there are likely some Kconfig,
    board file, and PM issues with EMAC

PM tests:

* 37xx EVM: CORE not entering dynamic off-idle
  - Cause unknown; dynamic retention-idle seems to work; system suspend to 
    off works

* 3730 Beagle XM: does not serial wake from off-idle suspend when console
  UART doesn't clock gate ("debug ignore_loglevel")
  - Not shown in the current test logs; cause unknown

* 4430ES2 Panda: UART corruption during long transmit buffers
  - Presumably due to either a missing hardware workaround or a bug in
    the OMAP serial driver

* 4430ES2 Panda: CORE, L4PER, L3INIT, TESLA, IVAHD not going idle
  - Cause unknown; may be partially due to McPDM reset problem


Changes from v3.6-rc4 (test 20120904122415):
(see http://www.pwsan.com/omap/testlogs/test_v3.6-rc4/20120904122415/ )

- N800 no longer panics on boot

- Kernel command line changed for PM tests; 'debug ignore_loglevel' no
  longer specified.  This allows UART clock gating on OMAP4, but does
  not seem to affect OMAP3 (!).  During test 20120904122415, this
  masked the UART transmit data corruption problem that was seen on
  previous tests, e.g.
  http://www.pwsan.com/omap/testlogs/am35xx_devel_3.6/20120628014213/pm/4430es2panda_log.txt

- OMAP4 UART transmit buffer corruption visible again, due to the
  above change.

- 3730 Beagle XM added back into to boot & PM testbed.

- Kernel configs are now included in the test report tree under the
  build/kernels directory (thanks to Andreas for the suggestion)

--------------------------------------------------------------------


Branch: test_v3.6-rc5
Test-Serial: 20120908202511
Commit-ID: 55d512e245bc7699a8800e23df1a24195dd08217
Test-Target-Board-Count: 9