OMAP baseline test results for v3.7-rc5


Here are some basic OMAP test results for Linux v3.7-rc5.
Logs and other details at:

    http://www.pwsan.com/omap/testlogs/test_v3.7-rc5/20121111081034/


Passing tests
-------------

Boot to userspace (9/11): 2420n800, 2430sdp, 3517evm, 3530es3beagle,
    3730beaglexm, 37xxevm, 4430es2panda, 5912osk, am335xbone
  
PM ret/off, suspend + dynamic idle (2/4): 3730beaglexm, 37xxevm


Failing tests: fixed by posted patches
--------------------------------------

Boot tests:

* 3530ES3 Beagle: I2C timeouts during userspace init
  - Intermittent, appears on 5 out of 6 boots here
  - Aaro Koskinen observes this also on N900
  - Appears to be caused by commit 3db11feffc1ad2ab9dea27789e6b5b3032827adc
    - http://marc.info/?l=linux-arm-kernel&m=135071372426971&w=2
    - http://marc.info/?l=linux-omap&m=135197877112220&w=2
  - Revert posted, pending I2C maintainers:
    - http://marc.info/?l=linux-arm-kernel&m=135221953727077&w=2

PM tests:

* 3530es3beagle: hangs during off-mode dynamic idle test
  - Appears to be caused by commit 6c31b2150ff96755d24e0ab6d6fea08a7bf5c44c:
    - http://marc.info/?l=linux-omap&m=135075364705188&w=2
  - Fixed by http://www.spinics.net/lists/arm-kernel/msg202116.html
 
Other:

* 2420N800: powers down 30 seconds after boot
  - Presumably due to missing CBUS patches for watchdog control
  - http://lkml.org/lkml/2012/9/3/265

* 4430es2panda: omap_hwmod: mcpdm: cannot be enabled for reset (3)
  - clock source is from an external I2C-controlled source
  - must skip reset until the switchover to hwmod late init
  - http://www.spinics.net/lists/arm-kernel/msg178138.html


Failing tests: needing investigation
------------------------------------

Boot tests:

* CM-T3517: L3 in-band error with IPSS during boot
  - Cause unknown but see http://marc.info/?l=linux-omap&m=134833869730129&w=2
  - Longstanding issue; does not occur on the 3517EVM

* 3517EVM & CM-T3517: boot hangs with NFS root
  - Likely some Kconfig, board file, and PM issues with EMAC

* CM-T3517: boot hangs with MMC boot
  - Due to missing MMC setup in board file

Other:

* 4430es2panda: omap_hwmod: l3_instr: _wait_target_disable failed
  - Unknown cause; could be due to the lack of hierarchical enable/disable
    in hwmod code
  - Jon Hunter reports this does not appear with the same X-loader/bootloader
    on his 4430ES2.3 Panda, so could be ES-level dependent


Failing tests: needing local investigation (may be due to testbed issues)
-------------------------------------------------------------------------

Boot tests:

* AM335x Beaglebone: omap2plus_defconfig kernels don't boot
  - May be fixed now, pending retest:
    - http://marc.info/?l=linux-omap&m=135082257727502&w=2
  - Not yet part of the automated test suite
  * May be due to an old U-boot with FDT support problems used here?
    Pending local investigation and re-test

* 4460pandaes: boot fails early
  - Appears to be due to X-loader problems here
  - Need to note the X-loader version so we know it's broken

PM tests:

* 3730 Beagle XM: does not serial wake from off-idle suspend when console
  UART doesn't clock gate ("debug ignore_loglevel")
  - Not shown in the current test logs; cause unknown
  - Pending re-test



--------------------------------------------------------------
Branch: test_v3.7-rc5
Test-Serial: 20121111081034
Commit-ID: 77b67063bb6bce6d475e910d3b886a606d0d91f7
Test-Target-Board-Count: 11