OMAP baseline test results for v3.7-rc7 Here are some basic OMAP test results for Linux v3.7-rc7. Logs and other details at: http://www.pwsan.com/omap/testlogs/test_v3.7-rc7/20121127152704/ Passing tests ------------- Boot to userspace (10/11): 2420n800, 2430sdp, 3517evm, 3530es3beagle, 3730beaglexm, 37xxevm, 4430es2panda, 5912osk, am335xbone, 4460pandaes PM ret/off, suspend + dynamic idle (3/4): 3530es3beagle, 3730beaglexm, 37xxevm Failing tests: fixed by posted patches -------------------------------------- Other: * 2420N800: powers down 30 seconds after boot - Presumably due to missing CBUS patches for watchdog control - http://lkml.org/lkml/2012/9/3/265 - http://marc.info/?l=linux-omap&m=135274739624125&w=2 Failing tests: needing investigation ------------------------------------ Boot tests: * CM-T3517: L3 in-band error with IPSS during boot - Cause unknown but see http://marc.info/?l=linux-omap&m=134833869730129&w=2 - Longstanding issue; does not occur on the 3517EVM * 3517EVM & CM-T3517: boot hangs with NFS root - Likely some Kconfig, board file, and PM issues with EMAC * CM-T3517: boot hangs with MMC root - Due to missing MMC setup in board file Other: * 4430es2panda: omap_hwmod: l3_instr: _wait_target_disable failed - Unknown cause; could be due to the lack of hierarchical enable/disable in hwmod code - Jon Hunter reports this does not appear with the same X-loader/bootloader on his 4430ES2.3 Panda, so could be ES-level dependent Failing tests: needing local investigation (may be due to testbed issues) ------------------------------------------------------------------------- Boot tests: * AM335x Beaglebone: omap2plus_defconfig kernels don't boot - May be fixed now, pending retest: - http://marc.info/?l=linux-omap&m=135082257727502&w=2 - Not yet part of the automated test suite * May be due to an old U-boot with FDT support problems used here? Pending local investigation and re-test * 4460pandaes: boot to login prompt doesn't complete - May be due to root filesystem problems here PM tests: * 3730 Beagle XM: does not serial wake from off-idle suspend when console UART doesn't clock gate ("debug ignore_loglevel") - Not shown in the current test logs; cause unknown - Pending re-test -------------------------------------------------------------- Branch: test_v3.7-rc7 Test-Serial: 20121127152704 Commit-ID: 9489e9dcae718d5fde988e4a684a0f55b5f94d17 Test-Target-Board-Count: 11