OMAP baseline test results for v3.7-rc8


Here are some basic OMAP test results for Linux v3.7-rc8.
Logs and other details at:

    http://www.pwsan.com/omap/testlogs/test_v3.7-rc8/20121204220128/


Passing tests
-------------

Boot to userspace (10/11): 2420n800, 2430sdp, 3517evm, 3530es3beagle,
    3730beaglexm, 37xxevm, 4430es2panda, 5912osk, am335xbone,
    4460pandaes
  
PM ret/off, suspend + dynamic idle (3/4): 3530es3beagle, 3730beaglexm,
    37xxevm


Failing tests: fixed by posted patches
--------------------------------------

Boot tests:

* 3730 Beagle XM: "attempt to access beyond end of device"
  - Not an OMAP-specific problem
  - Should be fixed by http://marc.info/?l=linux-kernel&m=135458657217682&w=2

Other:

* 2420N800: powers down 30 seconds after boot
  - Presumably due to missing CBUS patches for watchdog control
  - http://lkml.org/lkml/2012/9/3/265
  - http://marc.info/?l=linux-omap&m=135274739624125&w=2


Failing tests: needing investigation
------------------------------------

Boot tests:

* CM-T3517: L3 in-band error with IPSS during boot
  - Cause unknown but see http://marc.info/?l=linux-omap&m=134833869730129&w=2
  - Longstanding issue; does not occur on the 3517EVM

* 3517EVM & CM-T3517: boot hangs with NFS root
  - Likely some Kconfig, board file, and PM issues with EMAC

* CM-T3517: boot hangs with MMC root
  - Due to missing MMC setup in board file

Other:

* 4430es2panda: omap_hwmod: l3_instr: _wait_target_disable failed
  - Unknown cause; could be due to the lack of hierarchical enable/disable
    in hwmod code
  - Jon Hunter reports this does not appear with the same X-loader/bootloader
    on his 4430ES2.3 Panda, so could be ES-level dependent


Failing tests: needing local investigation (may be due to testbed issues)
-------------------------------------------------------------------------

Boot tests:

* AM335x Beaglebone: omap2plus_defconfig kernels don't boot
  - May be fixed now, pending retest:
    - http://marc.info/?l=linux-omap&m=135082257727502&w=2
  - Not yet part of the automated test suite
  * May be due to an old U-boot with FDT support problems used here?
    Pending local investigation and re-test

PM tests:

* 3730 Beagle XM: does not serial wake from off-idle suspend when console
  UART doesn't clock gate ("debug ignore_loglevel")
  - Not yet part of the automated test suite; cause unknown
  - Pending re-test



--------------------------------------------------------------
Branch: test_v3.7-rc8
Test-Serial: 20121204220128
Commit-ID: b69f0859dc8e633c5d8c06845811588fe17e68b3
Test-Target-Board-Count: 11