0 U-Boot# U-Boot# ver U-Boot 2013.01-00161-g6e787b7 (Feb 06 2013 - 15:10:23) arm-none-eabi-gcc (Sourcery G++ Lite 2011.03-42) 4.5.2 GNU ld (Sourcery G++ Lite 2011.03-42) 2.20.51.20100809 U-Boot# setenv bootargs console=ttyO0,115200n8 debug ignore_loglevel earlyprintk=serial init=/bin/sh mem=128M root=/dev/ram rw initrd=0x82000000,16MB ramdisk_size=65536 U-Boot# U-Boot# setenv serverip 192.168.57.1 U-Boot# U-Boot# setenv bootfile uImage-dtb.am335x-bone U-Boot# U-Boot# dhcp 81000000 link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.57.137 Using cpsw device TFTP from server 192.168.57.1; our IP address is 192.168.57.137 Filename 'uImage-dtb.am335x-bone'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################### 751 KiB/s done Bytes transferred = 4354137 (427059 hex) U-Boot# mmc rescan 0 U-Boot# U-Boot# fatload mmc 0 82000000 ramdisk-pm.gz reading ramdisk-pm.gz 2022580 bytes read in 239 ms (8.1 MiB/s) U-Boot# U-Boot# bootm 81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4354073 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-rc5 (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Mar 24 12:29:02 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x87000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c086a300, node_mem_map c6ed1000 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES1.0 (sgx neon ) [ 0.000000] PERCPU: Embedded 12 pages/cpu @c6ea7000 s18368 r8192 d22592 u49152 [ 0.000000] pcpu-alloc: s18368 r8192 d22592 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyO0,115200n8 debug ignore_loglevel earlyprintk=serial init=/bin/sh mem=128M root=/dev/ram rw initrd=0x82000000,16MB ramdisk_size=65536 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 79956K/131072K available (5782K kernel code, 336K rwdata, 2128K rodata, 360K init, 8216K bss, 34732K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07c1db0 (7912 kB) [ 0.000000] .init : 0xc07c2000 - 0xc081c000 ( 360 kB) [ 0.000000] .data : 0xc081c000 - 0xc08701a8 ( 337 kB) [ 0.000000] .bss : 0xc08701a8 - 0xc1076490 (8217 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns [ 0.000107] OMAP clocksource: timer1 at 24000000 Hz [ 0.001466] Console: colour dummy device 80x30 [ 0.001553] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001569] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001583] ... MAX_LOCK_DEPTH: 48 [ 0.001597] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001610] ... CLASSHASH_SIZE: 4096 [ 0.001623] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001636] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001649] ... CHAINHASH_SIZE: 32768 [ 0.001663] memory used by lock dependency info: 5167 kB [ 0.001677] per task-struct memory footprint: 1152 bytes [ 0.001716] Calibrating delay loop... 548.04 BogoMIPS (lpj=2740224) [ 0.108189] pid_max: default: 32768 minimum: 301 [ 0.108744] Security Framework initialized [ 0.109019] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.109049] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.113872] Initializing cgroup subsys blkio [ 0.113943] Initializing cgroup subsys memory [ 0.114093] Initializing cgroup subsys devices [ 0.114254] Initializing cgroup subsys freezer [ 0.114461] Initializing cgroup subsys perf_event [ 0.114586] CPU: Testing write buffer coherency: ok [ 0.116743] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.116931] Setting up static identity map for 0x8057b9b8 - 0x8057ba28 [ 0.122636] Brought up 1 CPUs [ 0.122674] SMP: Total of 1 processors activated (548.04 BogoMIPS). [ 0.122691] CPU: All CPU(s) started in SVC mode. [ 0.127488] devtmpfs: initialized [ 0.131692] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.193744] omap_hwmod: tptc0 using broken dt data from edma [ 0.194402] omap_hwmod: tptc1 using broken dt data from edma [ 0.195034] omap_hwmod: tptc2 using broken dt data from edma [ 0.206442] omap_hwmod: debugss: _wait_target_disable failed [ 0.268888] pinctrl core: initialized pinctrl subsystem [ 0.324038] NET: Registered protocol family 16 [ 0.334740] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.338280] cpuidle: using governor ladder [ 0.338333] cpuidle: using governor menu [ 0.349776] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.351216] OMAP GPIO hardware version 0.1 [ 0.353362] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.356518] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.359805] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.378854] No ATAGs? [ 0.378904] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.447360] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.448673] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]' [ 0.454233] SCSI subsystem initialized [ 0.455422] libata version 3.00 loaded. [ 0.457081] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe [ 0.457143] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral [ 0.463808] Switched to clocksource timer1 [ 0.694573] NET: Registered protocol family 2 [ 0.697519] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.697761] TCP bind hash table entries: 1024 (order: 3, 36864 bytes) [ 0.698394] TCP: Hash tables configured (established 1024 bind 1024) [ 0.698663] TCP: reno registered [ 0.698707] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.699051] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.700702] NET: Registered protocol family 1 [ 0.703084] RPC: Registered named UNIX socket transport module. [ 0.703120] RPC: Registered udp transport module. [ 0.703137] RPC: Registered tcp transport module. [ 0.703154] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.705715] Trying to unpack rootfs image as initramfs... [ 0.708228] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.884851] Freeing initrd memory: 16384K (c2000000 - c3000000) [ 0.885701] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.892743] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.893182] audit: initializing netlink subsys (disabled) [ 0.893787] audit: type=2000 audit(0.880:1): initialized [ 0.900843] VFS: Disk quotas dquot_6.5.2 [ 0.901107] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.905240] NFS: Registering the id_resolver key type [ 0.905817] Key type id_resolver registered [ 0.905843] Key type id_legacy registered [ 0.906125] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.913036] io scheduler noop registered [ 0.913093] io scheduler deadline registered [ 0.913182] io scheduler cfq registered (default) [ 0.916483] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.919909] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.929563] omap_uart 44e09000.serial: no wakeirq for uart0 [ 0.929623] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@44e09000[0]' [ 0.930510] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 154, base_baud = 3000000) is a OMAP UART0 [ 1.718145] console [ttyO0] enabled [ 1.769842] brd: module loaded [ 1.801394] loop: module loaded [ 1.808368] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.823413] mousedev: PS/2 mouse device common for all mice [ 1.829458] i2c /dev entries driver [ 1.833717] Driver 'mmcblk' needs updating - please use bus_type methods [ 1.842494] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd [ 1.848937] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.855893] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0) [ 1.866398] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.871263] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 1.877626] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.884527] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 1.894152] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 1.903680] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 1.910907] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed [ 1.918473] omap_hsmmc 48060000.mmc: unable to get vmmc regulator -517 [ 1.926367] platform 48060000.mmc: Driver omap_hsmmc requests probe deferral [ 1.934292] ledtrig-cpu: registered to indicate activity on CPUs [ 1.942020] oprofile: using arm/armv7 [ 1.947044] TCP: cubic registered [ 1.950592] Initializing XFRM netlink socket [ 1.955396] NET: Registered protocol family 17 [ 1.960184] NET: Registered protocol family 15 [ 1.965484] Key type dns_resolver registered [ 1.970383] omap_voltage_late_init: Voltage driver support not added [ 1.978762] ThumbEE CPU extension supported. [ 1.983299] Registering SWP/SWPB emulation handler [ 2.047917] tps65217 0-0024: TPS65217 ID 0xf version 1.1 [ 2.053761] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.061143] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd [ 2.067573] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 2.074528] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0) [ 2.085040] omap_hsmmc 48060000.mmc: Got CD GPIO [ 2.089903] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 2.096258] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 2.103116] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 2.112738] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 2.122262] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 2.129350] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed [ 2.242493] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.253725] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.260127] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.268714] mmc0: new high speed SDHC card at address 1234 [ 2.279430] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 2.288484] libphy: 4a101000.mdio: probed [ 2.292732] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.305015] cpsw 4a100000.ethernet: Detected MACID = d4:94:a1:90:76:28 [ 2.316366] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.354526] vmmcsd_fixed: disabling [ 2.365492] mmcblk0: p1 p2 [ 2.375065] RAMDISK: gzip image found at block 0 [ 2.878921] VFS: Mounted root (ext2 filesystem) on device 1:0. [ 2.886764] devtmpfs: mounted [ 2.890957] Freeing unused kernel memory: 360K (c07c2000 - c081c000) /bin/sh: can't access tty; jobƒþ/ # / # / #