U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-som Sending: Transfer complete - CRC mode, 2(SOH)/4434(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00454797 = 4540311 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4540247 Bytes = 4.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-rc6-00153-ge42391c (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Apr 1 18:09:28 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite OMAP4 SOM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c08fb000, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @eeea3000 s18496 r8192 d22464 u49152 [ 0.000000] pcpu-alloc: s18496 r8192 d22464 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260178 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1003328K/1047552K available (5896K kernel code, 595K rwdata, 2264K rodata, 428K init, 8219K bss, 27840K reserved, 16384K cma-reserved, 252928K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08005cc (8162 kB) [ 0.000000] .init : 0xc0801000 - 0xc086c000 ( 428 kB) [ 0.000000] .data : 0xc086c000 - 0xc0900ea8 ( 596 kB) [ 0.000000] .bss : 0xc0900ea8 - 0xc1107c10 (8220 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000183] smp_twd: clock not found -2 [ 0.001831] Console: colour dummy device 80x30 [ 0.001892] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001892] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001892] ... MAX_LOCK_DEPTH: 48 [ 0.001892] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001922] ... CLASSHASH_SIZE: 4096 [ 0.001922] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001922] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001922] ... CHAINHASH_SIZE: 32768 [ 0.001953] memory used by lock dependency info: 5167 kB [ 0.001953] per task-struct memory footprint: 1152 bytes [ 0.001983] Calibrating local timer... 347.68MHz. [ 0.058990] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240) [ 0.098754] pid_max: default: 32768 minimum: 301 [ 0.099121] Security Framework initialized [ 0.099273] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.099304] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.102294] Initializing cgroup subsys blkio [ 0.102325] Initializing cgroup subsys memory [ 0.102416] Initializing cgroup subsys devices [ 0.102508] Initializing cgroup subsys freezer [ 0.102630] Initializing cgroup subsys perf_event [ 0.102691] CPU: Testing write buffer coherency: ok [ 0.103973] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.104064] Setting up static identity map for 0x805962c8 - 0x80596338 [ 0.148376] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.149169] Brought up 2 CPUs [ 0.149169] SMP: Total of 2 processors activated (2768.89 BogoMIPS). [ 0.149200] CPU: All CPU(s) started in SVC mode. [ 0.152191] devtmpfs: initialized [ 0.154327] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.158508] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.162170] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.211425] ------------[ cut here ]------------ [ 0.211456] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2457 _init+0x3a0/0x3ec() [ 0.211456] omap_hwmod: mailbox: doesn't have mpu register target base [ 0.211486] Modules linked in: [ 0.211486] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc6-00153-ge42391c #1 [ 0.211517] Hardware name: Generic OMAP4 (Flattened Device Tree) [ 0.211547] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.211578] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.211608] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.211639] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.211639] [] (warn_slowpath_fmt) from [] (_init+0x3a0/0x3ec) [ 0.211669] [] (_init) from [] (omap_hwmod_for_each+0x30/0x5c) [ 0.211700] [] (omap_hwmod_for_each) from [] (__omap_hwmod_setup_all+0x24/0x40) [ 0.211700] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x80/0x1d8) [ 0.211730] [] (do_one_initcall) from [] (kernel_init_freeable+0x1fc/0x2d4) [ 0.211761] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.211761] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.211853] ---[ end trace f06e77e7a03be820 ]--- [ 0.322326] pinctrl core: initialized pinctrl subsystem [ 0.368133] NET: Registered protocol family 16 [ 0.373291] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.396942] cpuidle: using governor ladder [ 0.426605] cpuidle: using governor menu [ 0.435516] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.436279] OMAP GPIO hardware version 0.1 [ 0.437530] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.439331] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.441040] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.442779] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.444488] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.445922] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.467407] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.467895] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.469635] No ATAGs? [ 0.469726] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.469726] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.472290] OMAP DMA hardware revision 0.0 [ 0.552703] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.553436] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]' [ 0.557769] SCSI subsystem initialized [ 0.558258] libata version 3.00 loaded. [ 0.560729] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 0.561798] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 0.562927] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 0.563781] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 0.567993] Switched to clocksource 32k_counter [ 0.694641] NET: Registered protocol family 2 [ 0.696563] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.696807] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.699462] TCP: Hash tables configured (established 8192 bind 8192) [ 0.699707] TCP: reno registered [ 0.699737] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.700103] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.701202] NET: Registered protocol family 1 [ 0.702545] RPC: Registered named UNIX socket transport module. [ 0.702545] RPC: Registered udp transport module. [ 0.702545] RPC: Registered tcp transport module. [ 0.702575] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.703338] usbhs_omap 4a064000.usbhshost: refclk_60m_ext_p1 failed error:-2 [ 0.703399] usbhs_omap: probe of 4a064000.usbhshost failed with error -2 [ 0.709991] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.710327] audit: initializing netlink subsys (disabled) [ 0.710540] audit: type=2000 audit(0.700:1): initialized [ 0.714660] VFS: Disk quotas dquot_6.5.2 [ 0.714813] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.717224] NFS: Registering the id_resolver key type [ 0.717590] Key type id_resolver registered [ 0.717590] Key type id_legacy registered [ 0.717803] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.722167] bounce: pool size: 64 pages [ 0.722290] io scheduler noop registered [ 0.722290] io scheduler deadline registered [ 0.722351] io scheduler cfq registered (default) [ 0.725128] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.725585] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.728393] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.733673] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.733673] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.734161] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 225, base_baud = 3000000) is a OMAP UART0 [ 0.735839] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.735870] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.736114] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 226, base_baud = 3000000) is a OMAP UART1 [ 0.737121] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.737152] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.737426] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 227, base_baud = 3000000) is a OMAP UART2 [ 1.809661] console [ttyO2] enabled [ 1.814483] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.820373] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 1.830505] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 228, base_baud = 3000000) is a OMAP UART3 [ 1.864746] brd: module loaded [ 1.883941] loop: module loaded [ 1.889190] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.919433] twl 0-0048: PIH (irq 329) nested IRQs [ 1.949279] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.965698] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.976104] spi1.0 supply vdd-io not found, using dummy regulator [ 1.983184] ks8851 spi1.0: message enable is 0 [ 1.992889] ks8851 spi1.0 eth0: revision 1, MAC 2e:6e:37:9d:7a:98, IRQ 201, no EEPROM [ 2.005004] mousedev: PS/2 mouse device common for all mice [ 2.010864] i2c /dev entries driver [ 2.017303] Driver 'mmcblk' needs updating - please use bus_type methods [ 2.025451] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.031738] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.038604] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.048187] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.057647] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.064758] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.070892] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.077178] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.084014] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.093566] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.103027] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.110076] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.158203] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.164520] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.171417] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.180999] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.190460] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.197509] omap_hsmmc 480d5000.mmc: lookup for GPIO cd failed [ 2.203674] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.210021] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.216857] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.226440] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.235931] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.242950] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.249725] 480d5000.mmc supply vmmc not found, using dummy regulator [ 2.256622] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.263824] omap_hsmmc 480d5000.mmc: could not set regulator OCR (-22) [ 2.278869] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.289581] mmc0: new high speed SDHC card at address 0007 [ 2.297180] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 2.305999] mmcblk0: p1 p2 [ 2.310394] ledtrig-cpu: registered to indicate activity on CPUs [ 2.317779] oprofile: no performance counters [ 2.325286] oprofile: using timer interrupt. [ 2.330566] TCP: cubic registered [ 2.334075] Initializing XFRM netlink socket [ 2.338714] NET: Registered protocol family 17 [ 2.343475] NET: Registered protocol family 15 [ 2.348510] Key type dns_resolver registered [ 2.353759] omap_hsmmc 480d5000.mmc: exceeding card's volts [ 2.353851] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.353851] omap2_set_init_voltage: unable to set vdd_mpu [ 2.353881] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.353881] omap2_set_init_voltage: unable to set vdd_core [ 2.353881] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.353881] omap2_set_init_voltage: unable to set vdd_iva [ 2.355834] Power Management for TI OMAP4+ devices. [ 2.355834] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.359802] ThumbEE CPU extension supported. [ 2.359802] Registering SWP/SWPB emulation handler [ 2.359802] SmartReflex Class3 initialized [ 2.383392] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.384460] sr_init: No PMIC hook to init smartreflex [ 2.384765] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.384765] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.385589] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 2.426513] VUSB: disabling [ 2.427276] VANA: disabling [ 2.428100] VDAC: disabling [ 2.431121] VAUX1_6030: disabling [ 2.475158] Waiting for root device /dev/mmcblk1p2... [ 2.498077] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.505462] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.717498] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.727813] mmc1: new high speed SDHC card at address b368 [ 2.734619] mmcblk1: mmc1:b368 USD 3.75 GiB [ 2.743011] mmcblk1: p1 p2 [ 2.811370] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.823822] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 2.838470] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 2.838470] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 3.995483] EXT4-fs (mmcblk1p2): recovery complete [ 4.460845] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.469512] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 4.479980] devtmpfs: mounted [ 4.479980] Freeing unused kernel memory: 428K (c0801000 - c086c000) modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd[ 5.690368] udevd[108]: starting version 172 . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Activating swap...done. [ 7.652862] EXT4-fs (mmcblk1p2): warning: mounting fs with errors, running e2fsck is recommended [ 8.018493] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) Cleaning up ifupdown.... Setting up networking.... Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux 2.19.1 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...done. Cleaning up temporary files.... Setting kernel variables ...done. [ 11.708007] random: dd urandom read with 69 bits of entropy available INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Debian GNU/Linux wheezy/sid armel ttyO2 armel login: