Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# done Bytes transferred = 4554348 (457e6c hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4554284 Bytes = 4.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-rc6-00153-ge42391c (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Apr 1 18:09:28 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c08fb000, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 12 pages/cpu @cfc3f000 s18496 r8192 d22464 u49152 [ 0.000000] pcpu-alloc: s18496 r8192 d22464 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 224240K/261120K available (5896K kernel code, 595K rwdata, 2264K rodata, 428K init, 8219K bss, 20496K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08005cc (8162 kB) [ 0.000000] .init : 0xc0801000 - 0xc086c000 ( 428 kB) [ 0.000000] .data : 0xc086c000 - 0xc0900ea8 ( 596 kB) [ 0.000000] .bss : 0xc0900ea8 - 0xc1107c10 (8220 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000029] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns [ 0.000156] OMAP clocksource: timer1 at 13000000 Hz [ 0.001607] Console: colour dummy device 80x30 [ 0.001699] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001718] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001733] ... MAX_LOCK_DEPTH: 48 [ 0.001748] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001762] ... CLASSHASH_SIZE: 4096 [ 0.001775] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001789] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001803] ... CHAINHASH_SIZE: 32768 [ 0.001818] memory used by lock dependency info: 5167 kB [ 0.001832] per task-struct memory footprint: 1152 bytes [ 0.001875] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.105789] pid_max: default: 32768 minimum: 301 [ 0.106401] Security Framework initialized [ 0.106659] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106688] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.111723] Initializing cgroup subsys blkio [ 0.111793] Initializing cgroup subsys memory [ 0.111932] Initializing cgroup subsys devices [ 0.112085] Initializing cgroup subsys freezer [ 0.112301] Initializing cgroup subsys perf_event [ 0.112442] CPU: Testing write buffer coherency: ok [ 0.114699] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.114921] Setting up static identity map for 0x805962c8 - 0x80596338 [ 0.121340] Brought up 1 CPUs [ 0.121376] SMP: Total of 1 processors activated (597.60 BogoMIPS). [ 0.121395] CPU: All CPU(s) started in SVC mode. [ 0.127093] devtmpfs: initialized [ 0.140786] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.219191] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.221414] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.303229] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.303265] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.322391] pinctrl core: initialized pinctrl subsystem [ 0.435277] NET: Registered protocol family 16 [ 0.446066] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.449645] cpuidle: using governor ladder [ 0.449696] cpuidle: using governor menu [ 0.460071] Reprogramming SDRC clock to 332000000 Hz [ 0.464089] In-band Error seen by USB_OTG at address 0 [ 0.464119] ------------[ cut here ]------------ [ 0.464168] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.464186] Modules linked in: [ 0.464220] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc6-00153-ge42391c #1 [ 0.464237] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.464294] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.464340] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.464388] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.464420] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.464451] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.464487] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x60/0x1f4) [ 0.464515] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.464546] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.464573] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.464599] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.464626] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.464659] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.464677] Exception stack(0xce0a3cc8 to 0xce0a3d10) [ 0.464701] 3cc0: 00000001 ce0a1130 00000000 ce0a0b80 60000153 ce013c60 [ 0.464725] 3ce0: ce013c60 00000000 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d10 [ 0.464744] 3d00: c0084bc4 c0593edc 20000153 ffffffff [ 0.464773] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.464802] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.464829] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.464857] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.464898] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.464928] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 0.464956] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.464983] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.465009] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.465035] [] (bus_probe_device) from [] (device_add+0x2ec/0x4e8) [ 0.465063] [] (device_add) from [] (of_platform_device_create_pdata+0xec/0x148) [ 0.465088] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.465113] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.465144] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.465171] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.465206] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.465234] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d8) [ 0.465263] [] (do_one_initcall) from [] (kernel_init_freeable+0x1fc/0x2d4) [ 0.465292] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.465321] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.465492] ---[ end trace 086215b5f06dd8b3 ]--- [ 0.466591] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.477232] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.478802] OMAP GPIO hardware version 2.5 [ 0.481031] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.484283] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.487613] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.490692] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.493803] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.510391] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.511247] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.523265] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.526982] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.690356] No ATAGs? [ 0.690406] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.694467] OMAP DMA hardware revision 4.0 [ 0.791172] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.792685] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.794067] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.795334] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.796684] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.798027] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.798097] platform wl12xx_vmmc2: Driver reg-fixed-voltage requests probe deferral [ 0.798345] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.799518] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/pinmux@48002030/pinmux_sb_t35_audio_amp, deferring probe [ 0.799575] platform audio_amp: Driver reg-fixed-voltage requests probe deferral [ 0.799804] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.800943] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.808438] SCSI subsystem initialized [ 0.809705] libata version 3.00 loaded. [ 0.810973] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.811039] platform hsusb1_phy: Driver usb_phy_generic requests probe deferral [ 0.811179] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.811229] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral [ 0.812134] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c1_pins, deferring probe [ 0.812190] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.814786] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.815286] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c3_pins, deferring probe [ 0.815349] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 0.822891] Switched to clocksource timer1 [ 1.058788] NET: Registered protocol family 2 [ 1.061877] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.062135] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.063471] TCP: Hash tables configured (established 2048 bind 2048) [ 1.063870] TCP: reno registered [ 1.063922] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.064246] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.065858] NET: Registered protocol family 1 [ 1.068549] RPC: Registered named UNIX socket transport module. [ 1.068584] RPC: Registered udp transport module. [ 1.068604] RPC: Registered tcp transport module. [ 1.068622] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.075125] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.084935] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.085374] audit: initializing netlink subsys (disabled) [ 1.085813] audit: type=2000 audit(1.080:1): initialized [ 1.093742] VFS: Disk quotas dquot_6.5.2 [ 1.093986] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.097865] NFS: Registering the id_resolver key type [ 1.098524] Key type id_resolver registered [ 1.098552] Key type id_legacy registered [ 1.098868] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.107193] io scheduler noop registered [ 1.107247] io scheduler deadline registered [ 1.107339] io scheduler cfq registered (default) [ 1.112085] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.113240] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.120987] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.131727] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.131787] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.133425] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.136795] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.136850] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.137323] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.139599] omap_uart 49020000.serial: no wakeirq for uart0 [ 1.139649] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.140119] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.560593] console [ttyO2] enabled [ 2.617405] brd: module loaded [ 2.651113] loop: module loaded [ 2.659404] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.668809] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.675636] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.680526] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.688742] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.695130] Creating 5 MTD partitions on "omap2-nand.0": [ 2.700759] 0x000000000000-0x000000080000 : "xloader" [ 2.715593] 0x000000080000-0x000000260000 : "uboot" [ 2.727524] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.739040] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.752827] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.234241] libphy: smsc911x-mdio: probed [ 3.239034] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.252800] smsc911x 2d000000.ethernet eth0: MAC Address: 06:6e:73:38:02:c8 [ 3.302570] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.309104] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.319804] libphy: davinci_mdio.0: probed [ 3.324330] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.333022] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.346908] mousedev: PS/2 mouse device common for all mice [ 3.352991] i2c /dev entries driver [ 3.359490] Driver 'mmcblk' needs updating - please use bus_type methods [ 3.369404] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.375954] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.383015] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.393476] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.398362] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.404747] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.411707] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.422140] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.464162] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.470521] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.477536] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.487224] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.496805] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.504263] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.511250] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.519101] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 3.527300] ledtrig-cpu: registered to indicate activity on CPUs [ 3.535961] oprofile: using arm/armv7 [ 3.541056] TCP: cubic registered [ 3.544764] Initializing XFRM netlink socket [ 3.549526] NET: Registered protocol family 17 [ 3.554430] NET: Registered protocol family 15 [ 3.559708] Key type dns_resolver registered [ 3.564699] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.572313] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.578479] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.585869] omap2_set_init_voltage: unable to set vdd_core [ 3.593580] PM: no software I/O chain control; some wakeups may be lost [ 3.600581] pm: Failed to request pm_wkup irq [ 3.605328] ThumbEE CPU extension supported. [ 3.609903] Registering SWP/SWPB emulation handler [ 3.615047] SmartReflex Class3 initialized [ 3.638898] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.651288] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.662644] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.669542] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.676835] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.687033] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.694520] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.701707] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.711690] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.721542] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.728969] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.738004] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.745022] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.752257] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.762485] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.769915] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.777125] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.787108] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.796992] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.804385] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.818691] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.829239] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.836585] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.843051] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.849949] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.859635] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.869215] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.876337] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.894472] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.905217] mmc0: new high speed SDHC card at address b368 [ 3.914723] mmcblk0: mmc0:b368 NCard 3.73 GiB [ 3.927407] mmcblk0: p1 p2 [ 4.000426] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 4.007260] sr_init: No PMIC hook to init smartreflex [ 4.013161] sr_init: platform driver register failed for SR [ 4.097408] ads7846-reg: disabling [ 4.101048] hsusb2_vbus: disabling [ 4.104772] hsusb1_vbus: disabling [ 4.138900] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.151797] devtmpfs: mounted [ 4.156596] Freeing unused kernel memory: 428K (c0801000 - c086c000) /bin/sh: can't access tty; job control turned off # # #