怘€æ€˜€`3f<€fÀæøÀ̆ž?`??f?æžf<øž`??ð3ž<3ž<`<f<?˜à?˜æ?˜à0˜˜fÃðÀ€˜0†xð˜à؞Øàó̘àó˜xÌ𘘘03`Ì3ž<~<àžf<ðffü3f<<`<†žøž~<æžþž`?˜øfÃæàóæž?怘€à˜þž<`<†žøž~<˜æfÏàæžþž`?ø†<†žøž†øæžæž˜žfÏæàfü

U-Boot 2011.06-00001-ge147603 (Sep 07 2012 - 22:19:41)

OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Beagle xM Rev A
No EEPROM on expansion board
Die ID #2fa800001bf00000015739ea0702a01d
Hit any key to stop autoboot:  3  0 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # loady 0x81000000
## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
CSending: uImage-dtb.omap3-beagle-xm
Sending: 

Transfer complete
m - CRC mode, 6(SOH)/4451(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x00458d9c = 4558236 Bytes
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # setenv bootargs console=ttyO2,230400 vram=12M root=/dev/mmcblk0p2 rw mmcrootfstype=ext3 rootwait earlyprintk ignore_loglevel
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # bootm 0x81000000
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4558172 Bytes = 4.3 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.0.0-rc6-00153-ge42391c (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Apr 1 18:09:28 MDT 2015
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI OMAP3 BeagleBoard xM
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] cma: Reserved 16 MiB at 0x9e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 130816
[    0.000000] free_area_init_node: node 0, pgdat c08fb000, node_mem_map dfa71000
[    0.000000]   Normal zone: 1152 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130816 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] PERCPU: Embedded 12 pages/cpu @df9f8000 s18496 r8192 d22464 u49152
[    0.000000] pcpu-alloc: s18496 r8192 d22464 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129664
[    0.000000] Kernel command line: console=ttyO2,230400 vram=12M root=/dev/mmcblk0p2 rw mmcrootfstype=ext3 rootwait earlyprintk ignore_loglevel
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 483856K/523264K available (5896K kernel code, 595K rwdata, 2264K rodata, 428K init, 8219K bss, 23024K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08005cc   (8162 kB)
[    0.000000]       .init : 0xc0801000 - 0xc086c000   ( 428 kB)
[    0.000000]       .data : 0xc086c000 - 0xc0900ea8   ( 596 kB)
[    0.000000]        .bss : 0xc0900ea8 - 0xc1107c10   (8220 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Additional per-CPU info printed with stalls.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/331/600 MHz
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000061] OMAP clocksource: 32k_counter at 32768 Hz
[    0.001312] Console: colour dummy device 80x30
[    0.001373] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001403] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001403] ... MAX_LOCK_DEPTH:          48
[    0.001403] ... MAX_LOCKDEP_KEYS:        8191
[    0.001434] ... CLASSHASH_SIZE:          4096
[    0.001434] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001464] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001464] ... CHAINHASH_SIZE:          32768
[    0.001495]  memory used by lock dependency info: 5167 kB
[    0.001495]  per task-struct memory footprint: 1152 bytes
[    0.001525] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696)
[    0.107421] pid_max: default: 32768 minimum: 301
[    0.107940] Security Framework initialized
[    0.108184] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.108184] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.112487] Initializing cgroup subsys blkio
[    0.112548] Initializing cgroup subsys memory
[    0.112670] Initializing cgroup subsys devices
[    0.112792] Initializing cgroup subsys freezer
[    0.112976] Initializing cgroup subsys perf_event
[    0.113098] CPU: Testing write buffer coherency: ok
[    0.114990] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.115142] Setting up static identity map for 0x805962c8 - 0x80596338
[    0.120605] Brought up 1 CPUs
[    0.120635] SMP: Total of 1 processors activated (594.73 BogoMIPS).
[    0.120635] CPU: All CPU(s) started in SVC mode.
[    0.125061] devtmpfs: initialized
[    0.136993] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.221649] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.224060] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.335937] pinctrl core: initialized pinctrl subsystem
[    0.441040] NET: Registered protocol family 16
[    0.450378] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.453369] cpuidle: using governor ladder
[    0.453430] cpuidle: using governor menu
[    0.461761] Reprogramming SDRC clock to 331882352 Hz
[    0.473571] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
[    0.473632] platform 48310000.gpio: Driver omap_gpio requests probe deferral
[    0.476470] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.477996] OMAP GPIO hardware version 2.5
[    0.479949] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.482788] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.485534] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.488494] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[    0.491607] irq: no irq domain found for /ocp/pinmux@48002030 !
[    0.516754] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.519714] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
[    0.530181] No ATAGs?
[    0.530212] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.533905] OMAP DMA hardware revision 5.0
[    0.620178] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.621643] of_get_named_gpiod_flags: parsed 'gpio' property of node '/hsusb2_power_reg[0]' - status (-517)
[    0.621734] platform hsusb2_power_reg: Driver reg-fixed-voltage requests probe deferral
[    0.627380] SCSI subsystem initialized
[    0.628417] libata version 3.00 loaded.
[    0.629577] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset
[    0.629577] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup
[    0.629730] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0)
[    0.629882] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect
[    0.629882] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup
[    0.629913] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]'
[    0.629943] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]'
[    0.629943] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup
[    0.630126] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed
[    0.630645] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral
[    0.634002] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
[    0.635833] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
[    0.637542] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz
[    0.643890] Switched to clocksource 32k_counter
[    0.853179] NET: Registered protocol family 2
[    0.856018] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.856292] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[    0.858551] TCP: Hash tables configured (established 4096 bind 4096)
[    0.858856] TCP: reno registered
[    0.858886] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    0.859222] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    0.860656] NET: Registered protocol family 1
[    0.862854] RPC: Registered named UNIX socket transport module.
[    0.862884] RPC: Registered udp transport module.
[    0.862915] RPC: Registered tcp transport module.
[    0.862915] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.868591] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.877197] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.877593] audit: initializing netlink subsys (disabled)
[    0.877960] audit: type=2000 audit(0.860:1): initialized
[    0.884582] VFS: Disk quotas dquot_6.5.2
[    0.884796] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.888122] NFS: Registering the id_resolver key type
[    0.888610] Key type id_resolver registered
[    0.888641] Key type id_legacy registered
[    0.888916] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.895843] io scheduler noop registered
[    0.895874] io scheduler deadline registered
[    0.895965] io scheduler cfq registered (default)
[    0.900054] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    0.900848] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    0.902252] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
[    0.910308] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.919647] omap_uart 4806a000.serial: no wakeirq for uart0
[    0.919677] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]'
[    0.920501] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    0.923156] omap_uart 4806c000.serial: no wakeirq for uart0
[    0.923187] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]'
[    0.923614] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    0.926635] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]'
[    0.927062] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    1.430541] console [ttyO2] enabled
[    1.435363] omap_uart 49042000.serial: no wakeirq for uart0
[    1.438415] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49042000[0]'
[    1.444152] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3
[    1.491729] brd: module loaded
[    1.519866] loop: module loaded
[    1.551452] twl 0-0048: PIH (irq 23) chaining IRQs 307..315
[    1.555114] twl 0-0048: power (irq 312) chaining IRQs 315..322
[    1.619537] twl4030_gpio twl4030-gpio: gpio (irq 307) chaining IRQs 323..340
[    1.624053] gpiochip_find_base: found new base at 492
[    1.627563] gpiochip_add: registered GPIOs 492 to 511 on device: twl4030
[    1.700469] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.721405] mousedev: PS/2 mouse device common for all mice
[    1.724609] i2c /dev entries driver
[    1.730255] Driver 'mmcblk' needs updating - please use bus_type methods
[    1.736206] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
[    1.739501] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[    1.743072] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]'
[    1.748168] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]'
[    1.753082] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
[    1.756805] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed
[    1.759979] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp
[    1.763275] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[    1.766876] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]'
[    1.771850] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]'
[    1.776824] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
[    1.780456] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed
[    1.834960] ledtrig-cpu: registered to indicate activity on CPUs
[    1.840362] oprofile: using arm/armv7
[    1.843383] TCP: cubic registered
[    1.845397] Initializing XFRM netlink socket
[    1.847930] NET: Registered protocol family 17
[    1.850463] NET: Registered protocol family 15
[    1.853363] Key type dns_resolver registered
[    1.856201] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    1.860137] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    1.863281] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    1.867156] omap2_set_init_voltage: unable to set vdd_core
[    1.875335] ThumbEE CPU extension supported.
[    1.877716] Registering SWP/SWPB emulation handler
[    1.880340] SmartReflex Class3 initialized
[    1.897735] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[    1.903533] of_get_named_gpiod_flags: parsed 'gpio' property of node '/hsusb2_power_reg[0]' - status (0)
[    1.916625] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset
[    1.920196] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup
[    1.924163] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0)
[    1.929504] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect
[    1.933349] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup
[    1.937133] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]'
[    1.942260] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]'
[    1.947357] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup
[    1.951171] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed
[    1.959320] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.962768] sr_init: No PMIC hook to init smartreflex
[    1.966247] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    1.970764] smartreflex smartreflex.0: omap_sr_probe: smartreflex_mpu_iva: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    1.979217] smartreflex: probe of smartreflex.0 failed with error -61
[    1.982971] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    1.987579] smartreflex smartreflex.1: omap_sr_probe: smartreflex_core: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    1.995666] smartreflex: probe of smartreflex.1 failed with error -61
[    1.999328] sr_init: platform driver register failed for SR
[    2.082092] hsusb2_vbus: disabling
[    2.085968] VPLL2: disabling
[    2.088409] VUSB3V1: disabling
[    2.090850] VUSB1V8: disabling
[    2.093261] VUSB1V5: disabling
[    2.096160] VDAC: disabling
[    2.098724] VAUX3: disabling
[    2.105651] Waiting for root device /dev/mmcblk0p2...
[    2.297637] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.305297] mmc0: new high speed SDHC card at address 1234
[    2.311401] mmcblk0: mmc0:1234 SA04G 3.68 GiB 
[    2.321594]  mmcblk0: p1 p2
[    4.452178] kjournald starting.  Commit interval 5 seconds
[    4.455780] EXT3-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
[    4.860626] EXT3-fs (mmcblk0p2): using internal journal
[    4.872711] EXT3-fs (mmcblk0p2): recovery complete
[    4.875427] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    4.879364] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    4.890228] devtmpfs: mounted
[    4.892883] Freeing unused kernel memory: 428K (c0801000 - c086c000)
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
[    6.084899] udevd (90): /proc/90/oom_adj is deprecated, please use /proc/90/oom_score_adj instead.
Synthesizing the initial hotplug events
[   16.227264] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Remounting root file system...
mount: according to mtab, /proc is already mounted on /proc

WARNING: Couldn't open directory /lib/modules/4.0.0-rc6-00153-ge42391c: No such file or directory
FATAL: Could not open /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep.temp for writing: No such file or directory
root: mount: mount point /proc/bus/usb does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory

ifconfig: SIOCGIFFLAGS: No such device
modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory

eth0      No such device

modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory

udhcpc: SIOCGIFINDEX: No such device
done.
Starting portmap daemon: portmap.
hwclock: can't open '/dev/misc/rtc': No such file or directory
Tue Jul 22 00:18:00 UTC 2008
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1327: No soundcards found...
Starting Dropbear SSH server: [   24.732025] random: dropbear urandom read with 94 bits of entropy available
modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory

dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting system message bus: dbus.
Starting syslogd/klogd: start-stop-daemon: lseek: Invalid argument
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Bluetooth subsystem:modprobe: FATAL: Could not load /lib/modules/4.0.0-rc6-00153-ge42391c/modules.dep: No such file or directory
 hcid
 hid2hci.

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: root
login[1400]: root login  on `ttyO2'

root@beagleboard:~# 
root@beagleboard:~# %% Start PM consolidated quick test


%% Preparation


root@beagleboard:~# 
root@beagleboard:~# mount -t sysfs none /sys
mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
root@beagleboard:~# 
root@beagleboard:~# mount -t debugfs none /debug
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/a[   31.120971] random: nonblocking pool is initialized
utos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# echo 0 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# 
%% Baseline pm_debug count dump

cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1099,INA:0,ON:1100,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1099,INA:0,ON:1100,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:560,INA:539,ON:1100,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:560,INA:539,ON:1100,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (22)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo enabled >  $u/power/wakeup; done
root@beagleboard:~#
%% Start retention double suspend/resume UART wakeup test

 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo auto >  $u/power/control; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/wakeup; cat $u/power/wakeup; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO3/power/wakeup
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do ls -l $u/power/control; cat $u/power/control; done

enabled
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/control; cat $u/power/control; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/control
auto
echo mem > /sys/power/state

-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO3/power/control
auto
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   35.539642] PM: Syncing filesystems ... done.
[   37.174224] PM: Preparing system for mem sleep
[   37.206024] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   37.213317] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   37.220458] PM: Entering mem sleep
[   37.222320] Suspending console(s) (use no_console_suspend to debug)
[   37.251434] PM: suspend of devices complete after 18.981 msecs
[   37.260040] PM: late suspend of devices complete after 8.575 msecs
[   37.269897] PM: noirq suspend of devices complete after 9.826 msecs
[   37.270019] Disabling non-boot CPUs ...
[   37.270050] Successfully put all powerdomains to target state
[   37.275451] PM: noirq resume of devices complete after 5.310 msecs
[   37.282257] PM: early resume of devices complete after 5.462 msecs
[   37.679992] PM: resume of devices complete after 397.613 msecs
[   37.712554] PM: Finishing wakeup.
[   37.714416] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1216,INA:0,ON:1217,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1216,INA:0,ON:1217,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:673,INA:543,ON:1217,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:673,INA:543,ON:1217,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   40.480194] PM: Syncing filesystems ... done.
[   41.727172] PM: Preparing system for mem sleep
[   41.731781] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   41.737945] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   41.744354] PM: Entering mem sleep
[   41.746215] Suspending console(s) (use no_console_suspend to debug)
[   41.772430] PM: suspend of devices complete after 16.387 msecs
[   41.780883] PM: late suspend of devices complete after 8.422 msecs
[   41.789672] PM: noirq suspend of devices complete after 8.728 msecs
[   41.789703] Disabling non-boot CPUs ...
[   41.789703] Successfully put all powerdomains to target state
[   41.794860] PM: noirq resume of devices complete after 5.065 msecs
[   41.801574] PM: early resume of devices complete after 5.462 msecs
[   42.179046] PM: resume of devices complete after 377.319 msecs
[   42.210845] PM: Finishing wakeup.
[   42.212677] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1316,INA:0,ON:1317,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1316,INA:0,ON:1317,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:770,INA:546,ON:1317,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:770,INA:546,ON:1317,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_susp
-sh: ./test_rootfs_access_nonexistent_file__ret_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention double suspend/resume UART wakeup test


%% Start retention dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1447,INA:0,ON:1448,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:9,INA:3,ON:13,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:12,INA:0,ON:13,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1447,INA:0,ON:1448,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:898,INA:549,ON:1448,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:898,INA:549,ON:1448,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (13)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_dyn
-sh: ./test_rootfs_access_nonexistent_file__ret_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention dynamic idle UART wakeup test


%% Start off-mode double suspend UART wakeup test

echo 1 > /debug/pm_debug/enable_off_mode
[   62.801849] omap3_pm_off_mode_enable: Core OFF disabled due to errata i583
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   63.809722] PM: Syncing filesystems ... done.
[   64.639862] PM: Preparing system for mem sleep
[   64.644744] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   64.650726] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   64.657043] PM: Entering mem sleep
[   64.658935] Suspending console(s) (use no_console_suspend to debug)
[   64.683868] PM: suspend of devices complete after 15.167 msecs
[   64.692077] PM: late suspend of devices complete after 8.178 msecs
[   64.701599] PM: noirq suspend of devices complete after 9.490 msecs
[   64.701629] Disabling non-boot CPUs ...
[   64.701660] Successfully put all powerdomains to target state
[   64.707672] PM: noirq resume of devices complete after 5.920 msecs
[   64.715637] PM: early resume of devices complete after 5.676 msecs
[   65.108917] PM: resume of devices complete after 393.127 msecs
[   65.140686] PM: Finishing wakeup.
[   65.142486] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:47,RET:1533,INA:0,ON:1581,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:10,INA:3,ON:14,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:1,RET:12,INA:0,ON:14,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:47,RET:1533,INA:0,ON:1581,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:1,RET:1022,INA:557,ON:1581,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:1,RET:1022,INA:557,ON:1581,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   67.912109] PM: Syncing filesystems ... done.
[   69.168609] PM: Preparing system for mem sleep
[   69.173370] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   69.179504] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   69.185760] PM: Entering mem sleep
[   69.187652] Suspending console(s) (use no_console_suspend to debug)
[   69.212585] PM: suspend of devices complete after 15.106 msecs
[   69.221038] PM: late suspend of devices complete after 8.422 msecs
[   69.229797] PM: noirq suspend of devices complete after 8.758 msecs
[   69.229827] Disabling non-boot CPUs ...
[   69.229858] Successfully put all powerdomains to target state
[   69.235351] PM: noirq resume of devices complete after 5.401 msecs
[   69.242156] PM: early resume of devices complete after 5.432 msecs
[   69.618377] PM: resume of devices complete after 376.098 msecs
[   69.650115] PM: Finishing wakeup.
[   69.651947] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:149,RET:1533,INA:0,ON:1683,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:11,INA:3,ON:15,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:2,RET:12,INA:0,ON:15,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:149,RET:1533,INA:0,ON:1683,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:2,RET:1122,INA:558,ON:1683,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:2,RET:1122,INA:558,ON:1683,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_susp
-sh: ./test_rootfs_access_nonexistent_file__off_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode double suspend UART wakeup test


%% Start off-mode dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:272,RET:1533,INA:0,ON:1806,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:18,INA:3,ON:22,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:9,RET:12,INA:0,ON:22,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:272,RET:1533,INA:0,ON:1806,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:9,RET:1236,INA:560,ON:1806,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:9,RET:1236,INA:560,ON:1806,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (13)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_dyn
-sh: ./test_rootfs_access_nonexistent_file__off_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode dynamic idle UART wakeup test


%% End PM consolidated quick test