Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# done Bytes transferred = 4554740 (457ff4 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4554676 Bytes = 4.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0-130747-g39a8804 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Apr 21 08:16:21 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c08fb0c0, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 12 pages/cpu @cfc3f000 s18496 r8192 d22464 u49152 [ 0.000000] pcpu-alloc: s18496 r8192 d22464 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 224240K/261120K available (5896K kernel code, 595K rwdata, 2264K rodata, 428K init, 8219K bss, 20496K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0800620 (8162 kB) [ 0.000000] .init : 0xc0801000 - 0xc086c000 ( 428 kB) [ 0.000000] .data : 0xc086c000 - 0xc0900f68 ( 596 kB) [ 0.000000] .bss : 0xc0900f68 - 0xc1107cd0 (8220 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000030] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns [ 0.000150] OMAP clocksource: timer1 at 13000000 Hz [ 0.001647] Console: colour dummy device 80x30 [ 0.001737] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001756] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001771] ... MAX_LOCK_DEPTH: 48 [ 0.001785] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001799] ... CLASSHASH_SIZE: 4096 [ 0.001813] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001827] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001841] ... CHAINHASH_SIZE: 32768 [ 0.001855] memory used by lock dependency info: 5167 kB [ 0.001870] per task-struct memory footprint: 1152 bytes [ 0.001913] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.105859] pid_max: default: 32768 minimum: 301 [ 0.106495] Security Framework initialized [ 0.106772] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106801] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.111840] Initializing cgroup subsys blkio [ 0.111910] Initializing cgroup subsys memory [ 0.112052] Initializing cgroup subsys devices [ 0.112199] Initializing cgroup subsys freezer [ 0.112418] Initializing cgroup subsys perf_event [ 0.112561] CPU: Testing write buffer coherency: ok [ 0.114821] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.115043] Setting up static identity map for 0x80596588 - 0x805965f8 [ 0.121389] Brought up 1 CPUs [ 0.121425] SMP: Total of 1 processors activated (597.60 BogoMIPS). [ 0.121443] CPU: All CPU(s) started in SVC mode. [ 0.127149] devtmpfs: initialized [ 0.140976] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.217603] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.219813] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.300569] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.300605] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.319737] pinctrl core: initialized pinctrl subsystem [ 0.433123] NET: Registered protocol family 16 [ 0.443610] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.447363] cpuidle: using governor ladder [ 0.447414] cpuidle: using governor menu [ 0.457757] Reprogramming SDRC clock to 332000000 Hz [ 0.461769] In-band Error seen by USB_OTG at address 0 [ 0.461798] ------------[ cut here ]------------ [ 0.461848] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.461865] Modules linked in: [ 0.461899] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-130747-g39a8804 #1 [ 0.461916] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.461975] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.462022] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.462070] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.462102] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.462132] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.462167] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x60/0x1f4) [ 0.462195] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.462225] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.462252] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.462278] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.462304] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.462337] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.462356] Exception stack(0xce0a3cc8 to 0xce0a3d10) [ 0.462380] 3cc0: 00000001 ce0a1130 00000000 ce0a0b80 60000153 ce013c60 [ 0.462403] 3ce0: ce013c60 00000000 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d10 [ 0.462423] 3d00: c0084bc4 c059419c 20000153 ffffffff [ 0.462451] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.462478] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.462505] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.462534] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.462574] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.462605] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 0.462634] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.462661] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.462686] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.462712] [] (bus_probe_device) from [] (device_add+0x2ec/0x4e8) [ 0.462741] [] (device_add) from [] (of_platform_device_create_pdata+0xec/0x148) [ 0.462767] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.462791] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.462823] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.462850] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.462886] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.462914] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d8) [ 0.462943] [] (do_one_initcall) from [] (kernel_init_freeable+0x1fc/0x2d4) [ 0.462973] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.463000] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.463169] ---[ end trace f151df46091edefb ]--- [ 0.464120] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.474705] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.476433] OMAP GPIO hardware version 2.5 [ 0.478649] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.481903] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.485016] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.488301] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.491445] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.508036] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.508895] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.520836] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.524329] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.690385] No ATAGs? [ 0.690438] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.694473] OMAP DMA hardware revision 4.0 [ 0.790795] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.792303] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.793687] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.794938] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.796271] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.797615] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.797684] platform wl12xx_vmmc2: Driver reg-fixed-voltage requests probe deferral [ 0.797931] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.799105] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/pinmux@48002030/pinmux_sb_t35_audio_amp, deferring probe [ 0.799165] platform audio_amp: Driver reg-fixed-voltage requests probe deferral [ 0.799399] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.800531] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.808050] SCSI subsystem initialized [ 0.809323] libata version 3.00 loaded. [ 0.810592] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.810662] platform hsusb1_phy: Driver usb_phy_generic requests probe deferral [ 0.810800] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.810848] platform hsusb2_phy: Driver usb_phy_generic requests probe deferral [ 0.811751] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c1_pins, deferring probe [ 0.811807] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.814395] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.814888] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@48002030/pinmux_i2c3_pins, deferring probe [ 0.814950] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 0.822474] Switched to clocksource timer1 [ 1.057163] NET: Registered protocol family 2 [ 1.060252] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.060514] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.061661] TCP: Hash tables configured (established 2048 bind 2048) [ 1.062200] TCP: reno registered [ 1.062260] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.062583] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.064181] NET: Registered protocol family 1 [ 1.066944] RPC: Registered named UNIX socket transport module. [ 1.066981] RPC: Registered udp transport module. [ 1.067000] RPC: Registered tcp transport module. [ 1.067018] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.073624] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.083340] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.083763] audit: initializing netlink subsys (disabled) [ 1.084208] audit: type=2000 audit(1.080:1): initialized [ 1.091841] VFS: Disk quotas dquot_6.5.2 [ 1.092361] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.096286] NFS: Registering the id_resolver key type [ 1.096905] Key type id_resolver registered [ 1.096935] Key type id_legacy registered [ 1.097249] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.105568] io scheduler noop registered [ 1.105622] io scheduler deadline registered [ 1.105714] io scheduler cfq registered (default) [ 1.110496] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.111348] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.119457] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.130204] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.130265] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.131241] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.135163] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.135218] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.135694] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.137959] omap_uart 49020000.serial: no wakeirq for uart0 [ 1.138009] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.138475] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.559251] console [ttyO2] enabled [ 2.616002] brd: module loaded [ 2.650632] loop: module loaded [ 2.658912] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.668281] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.675110] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.679984] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.688195] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.694584] Creating 5 MTD partitions on "omap2-nand.0": [ 2.700214] 0x000000000000-0x000000080000 : "xloader" [ 2.715079] 0x000000080000-0x000000260000 : "uboot" [ 2.727042] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.738603] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.752435] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.233843] libphy: smsc911x-mdio: probed [ 3.238629] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.252387] smsc911x 2d000000.ethernet eth0: MAC Address: 0a:0f:ac:0b:fa:40 [ 3.302154] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.308690] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.319376] libphy: davinci_mdio.0: probed [ 3.323908] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.332627] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.346580] mousedev: PS/2 mouse device common for all mice [ 3.352663] i2c /dev entries driver [ 3.359125] Driver 'mmcblk' needs updating - please use bus_type methods [ 3.369046] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.375599] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.382653] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.393115] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.398017] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.404401] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.411357] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.421787] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.463746] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.470105] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.477122] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.486841] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.496452] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.503892] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.510872] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.518720] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 3.526928] ledtrig-cpu: registered to indicate activity on CPUs [ 3.535558] oprofile: using arm/armv7 [ 3.540657] TCP: cubic registered [ 3.544367] Initializing XFRM netlink socket [ 3.549132] NET: Registered protocol family 17 [ 3.554033] NET: Registered protocol family 15 [ 3.559320] Key type dns_resolver registered [ 3.564305] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.571922] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.578087] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.585475] omap2_set_init_voltage: unable to set vdd_core [ 3.593176] PM: no software I/O chain control; some wakeups may be lost [ 3.600175] pm: Failed to request pm_wkup irq [ 3.604921] ThumbEE CPU extension supported. [ 3.609498] Registering SWP/SWPB emulation handler [ 3.614660] SmartReflex Class3 initialized [ 3.638431] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.650827] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.662156] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.669051] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.676337] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.686532] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.694017] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.701179] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.711128] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.720976] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.728405] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.737433] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.744459] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.751690] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.761868] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.769359] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.776571] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.786519] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.796402] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.803793] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.818102] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.828621] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.835965] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.842432] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.849331] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.859016] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.868629] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.875773] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.893965] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.904705] mmc0: new high speed SDHC card at address b368 [ 3.914195] mmcblk0: mmc0:b368 NCard 3.73 GiB [ 3.926875] mmcblk0: p1 p2 [ 4.000025] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 4.006861] sr_init: No PMIC hook to init smartreflex [ 4.012741] sr_init: platform driver register failed for SR [ 4.096505] ads7846-reg: disabling [ 4.100145] hsusb2_vbus: disabling [ 4.103862] hsusb1_vbus: disabling [ 4.138334] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.151244] devtmpfs: mounted [ 4.156032] Freeing unused kernel memory: 428K (c0801000 - c086c000) /bin/sh: can't access tty; job control turned off # # #