Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################ done Bytes transferred = 3491425 (354661 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3491361 Bytes = 3.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-rc5-143184-gba155e2 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Fri May 29 16:30:33 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c095a7c0, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @cfc3d000 s22976 r8192 d22080 u53248 [ 0.000000] pcpu-alloc: s22976 r8192 d22080 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 223836K/261120K available (6215K kernel code, 739K rwdata, 2172K rodata, 440K init, 8220K bss, 20900K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0839084 (8389 kB) [ 0.000000] .init : 0xc083a000 - 0xc08a8000 ( 440 kB) [ 0.000000] .data : 0xc08a8000 - 0xc0960e18 ( 740 kB) [ 0.000000] .bss : 0xc0963000 - 0xc116a350 (8221 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000032] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000075] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000191] OMAP clocksource: timer1 at 13000000 Hz [ 0.001717] Console: colour dummy device 80x30 [ 0.001815] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001832] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001846] ... MAX_LOCK_DEPTH: 48 [ 0.001860] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001875] ... CLASSHASH_SIZE: 4096 [ 0.001889] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001902] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001916] ... CHAINHASH_SIZE: 32768 [ 0.001930] memory used by lock dependency info: 5167 kB [ 0.001944] per task-struct memory footprint: 1152 bytes [ 0.001987] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.095576] pid_max: default: 32768 minimum: 301 [ 0.096269] Security Framework initialized [ 0.096531] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096559] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101950] Initializing cgroup subsys blkio [ 0.102022] Initializing cgroup subsys memory [ 0.102168] Initializing cgroup subsys devices [ 0.102324] Initializing cgroup subsys freezer [ 0.102548] Initializing cgroup subsys perf_event [ 0.102680] CPU: Testing write buffer coherency: ok [ 0.105140] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.105353] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.113468] Brought up 1 CPUs [ 0.113507] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.113526] CPU: All CPU(s) started in SVC mode. [ 0.119993] devtmpfs: initialized [ 0.134966] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.217883] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.220243] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.305408] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.305443] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.321401] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.325439] pinctrl core: initialized pinctrl subsystem [ 0.446885] NET: Registered protocol family 16 [ 0.457746] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.461698] cpuidle: using governor ladder [ 0.461752] cpuidle: using governor menu [ 0.472176] Reprogramming SDRC clock to 332000000 Hz [ 0.476773] In-band Error seen by MPU at address 0 [ 0.476802] ------------[ cut here ]------------ [ 0.476848] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.476865] Modules linked in: [ 0.476899] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.1.0-rc5-143184-gba155e2 #1 [ 0.476916] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.476964] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.476997] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.477028] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.477056] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.477083] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.477121] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.477150] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.477181] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.477209] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.477235] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.477263] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.477299] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.477317] Exception stack(0xce0a3d00 to 0xce0a3d48) [ 0.477342] 3d00: 00000001 ce0a1138 00000000 ce0a0b80 60000153 ce013c60 ce013c60 00000000 [ 0.477365] 3d20: 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d48 c008dde8 c05e4424 [ 0.477382] 3d40: 20000153 ffffffff [ 0.477412] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.477442] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.477470] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.477498] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.477537] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.477567] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.477595] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.477621] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.477648] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.477673] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.477704] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.477731] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.477757] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.477792] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.477820] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.477849] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.477875] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d4) [ 0.477914] [] (do_one_initcall) from [] (kernel_init_freeable+0x1f4/0x2cc) [ 0.477956] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.477989] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.478159] ---[ end trace a2392ba44715f29e ]--- [ 0.478209] In-band Error seen by USB_OTG at address 0 [ 0.478226] ------------[ cut here ]------------ [ 0.478255] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.478269] Modules linked in: [ 0.478297] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.1.0-rc5-143184-gba155e2 #1 [ 0.478313] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.478344] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.478370] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.478397] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.478423] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.478449] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.478478] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.478504] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.478532] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.478559] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.478584] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.478610] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.478638] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.478656] Exception stack(0xce0a3d00 to 0xce0a3d48) [ 0.478680] 3d00: 00000001 ce0a1138 00000000 ce0a0b80 60000153 ce013c60 ce013c60 00000000 [ 0.478703] 3d20: 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d48 c008dde8 c05e4424 [ 0.478720] 3d40: 20000153 ffffffff [ 0.478748] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.478777] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.478804] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.478832] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.478862] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.478891] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.478918] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.478944] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.478970] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.478995] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.479022] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.479048] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.479074] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.479101] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.479128] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.479155] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.479180] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d4) [ 0.479210] [] (do_one_initcall) from [] (kernel_init_freeable+0x1f4/0x2cc) [ 0.479240] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.479268] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.479286] ---[ end trace a2392ba44715f29f ]--- [ 0.484201] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.493170] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.494878] OMAP GPIO hardware version 2.5 [ 0.497562] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.501130] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.504523] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.508232] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.511646] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.530089] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.531055] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.544621] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.548641] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.710661] No ATAGs? [ 0.710713] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.715918] OMAP DMA hardware revision 4.0 [ 0.822657] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.824218] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.825970] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.827242] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.828539] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.830006] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.830323] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.831554] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.831818] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.833031] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.840962] SCSI subsystem initialized [ 0.842370] libata version 3.00 loaded. [ 0.843620] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.843780] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.844687] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.848615] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.849070] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.857225] Switched to clocksource timer1 [ 1.132357] NET: Registered protocol family 2 [ 1.135760] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.136019] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.137366] TCP: Hash tables configured (established 2048 bind 2048) [ 1.137790] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.138117] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.139810] NET: Registered protocol family 1 [ 1.142919] RPC: Registered named UNIX socket transport module. [ 1.142952] RPC: Registered udp transport module. [ 1.142971] RPC: Registered tcp transport module. [ 1.142989] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.150049] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 1.150244] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.160684] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.161097] audit: initializing netlink subsys (disabled) [ 1.161518] audit: type=2000 audit(1.160:1): initialized [ 1.170015] VFS: Disk quotas dquot_6.6.0 [ 1.170267] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.175080] NFS: Registering the id_resolver key type [ 1.175822] Key type id_resolver registered [ 1.175850] Key type id_legacy registered [ 1.176178] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.185731] io scheduler noop registered [ 1.185784] io scheduler deadline registered [ 1.185878] io scheduler cfq registered (default) [ 1.190936] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.191911] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.199922] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.212292] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.212344] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.213435] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.217449] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.217500] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.218011] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.220678] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.220723] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.221226] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.979073] console [ttyO2] enabled [ 3.040892] brd: module loaded [ 3.077798] loop: module loaded [ 3.086144] mtdoops: mtd device (mtddev=name/number) must be supplied [ 3.095642] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 3.102431] nand: Samsung NAND 512MiB 3,3V 8-bit [ 3.107328] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 3.115447] 5 ofpart partitions found on MTD device omap2-nand.0 [ 3.121798] Creating 5 MTD partitions on "omap2-nand.0": [ 3.127422] 0x000000000000-0x000000080000 : "xloader" [ 3.143092] 0x000000080000-0x000000260000 : "uboot" [ 3.155735] 0x000000260000-0x0000002a0000 : "uboot environment" [ 3.167957] 0x0000002a0000-0x0000006a0000 : "linux" [ 3.182281] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.665777] libphy: smsc911x-mdio: probed [ 3.670795] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.684328] smsc911x 2d000000.ethernet eth0: MAC Address: 42:d9:87:19:63:b6 [ 3.736822] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.743317] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.754394] libphy: davinci_mdio.0: probed [ 3.758902] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.767541] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.781872] mousedev: PS/2 mouse device common for all mice [ 3.787930] i2c /dev entries driver [ 3.797909] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.804220] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.811346] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.821757] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.826610] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.832961] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.839902] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.850272] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.898582] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.904897] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.911881] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.921514] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.931038] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.938476] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.945471] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.954031] ledtrig-cpu: registered to indicate activity on CPUs [ 3.962890] oprofile: using arm/armv7 [ 3.968308] Initializing XFRM netlink socket [ 3.973064] NET: Registered protocol family 17 [ 3.978003] NET: Registered protocol family 15 [ 3.983361] Key type dns_resolver registered [ 3.988394] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.995959] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 4.002126] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 4.009470] omap2_set_init_voltage: unable to set vdd_core [ 4.017415] PM: no software I/O chain control; some wakeups may be lost [ 4.024421] pm: Failed to request pm_wkup irq [ 4.029140] ThumbEE CPU extension supported. [ 4.033677] Registering SWP/SWPB emulation handler [ 4.038808] SmartReflex Class3 initialized [ 4.064158] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 4.076651] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 4.088286] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 4.095136] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 4.102449] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 4.112570] no flags found for reset [ 4.116337] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 4.123778] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 4.130953] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 4.140839] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 4.150624] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 4.157981] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 4.167157] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 4.174008] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 4.181308] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 4.191416] no flags found for reset [ 4.195182] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 4.202613] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 4.209776] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 4.219671] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 4.229463] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 4.236810] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 4.252074] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 4.263320] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 4.270726] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.277164] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.284019] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.293647] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.303169] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.310252] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.331023] mmc0: new high speed SDHC card at address b368 [ 4.340754] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 4.354948] mmcblk0: p1 p2 [ 4.425414] hctosys: unable to open rtc device (rtc0) [ 4.430934] sr_init: No PMIC hook to init smartreflex [ 4.436885] sr_init: platform driver register failed for SR [ 4.528585] ads7846-reg: disabling [ 4.532198] hsusb2_vbus: disabling [ 4.535773] hsusb1_vbus: disabling [ 4.539781] In-band Error seen by MPU at address 0 [ 4.544895] ------------[ cut here ]------------ [ 4.549752] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 4.559030] Modules linked in: [ 4.562250] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.1.0-rc5-143184-gba155e2 #1 [ 4.571439] Hardware name: Generic AM3517 (Flattened Device Tree) [ 4.577847] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 4.585961] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 4.593527] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 4.602001] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 4.611202] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 4.620138] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 4.629519] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 4.638811] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 4.647560] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 4.656395] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 4.665503] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 4.674801] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 4.683170] Exception stack(0xce0a3dc8 to 0xce0a3e10) [ 4.688465] 3dc0: 00000001 ce0a1138 00000000 ce0a0b80 60000113 c0941b18 [ 4.697020] 3de0: ce592500 c0963000 c04cc334 00000090 00000000 00000000 c0a989e0 ce0a3e10 [ 4.705574] 3e00: c008dcc4 c05e4424 20000113 ffffffff [ 4.710876] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 4.719898] [] (_raw_spin_unlock_irqrestore) from [] (clk_disable_unused_subtree+0x30/0x180) [ 4.730542] ---[ end trace a2392ba44715f2a1 ]--- [ 4.769868] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.783280] devtmpfs: mounted [ 4.788193] Freeing unused kernel memory: 440K (c083a000 - c08a8000) /bin/sh: can't access tty; job control turned off # # #