U-Boot 1.1.4 (Mar 18 2007 - 12:22:00) OMAP2430C-GP revision 3, PRCM #5A TI 2430SDP 1.1 Version + mDDR (Boot NOR) DRAM: 128 MB Flash: 192 MB NAND:64 MB In: serial Out: serial Err: serial Hit any key to stop autoboot: 3  0 OMAP243X SDP # OMAP243X SDP # setenv bootargs console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh OMAP243X SDP # loady ## Ready for binary (ymodem) download to 0x80000000 at 115200 bps... CSending: uImage-dtb.omap2430-sdp Sending: Transfer complete de, 4(SOH)/3394(STX)/0(CAN) packets, 3 retries ## Total Size = 0x003508ef = 3475695 Bytes OMAP243X SDP # bootm ## Booting image at 80000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3475631 Bytes = 3.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-rc6-143384-gc65b99f (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Jun 1 01:27:20 MDT 2015 [ 0.000000] CPU: ARMv6-compatible processor [4107b366] revision 6 (ARMv6TEJ), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI OMAP2430 SDP [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x86800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32512 [ 0.000000] free_area_init_node: node 0, pgdat c095a7c0, node_mem_map c7dd1000 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] OMAP2430 [ 0.000000] [ 0.000000] PERCPU: Embedded 13 pages/cpu @c7d6e000 s22976 r8192 d22080 u53248 [ 0.000000] pcpu-alloc: s22976 r8192 d22080 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32224 [ 0.000000] Kernel command line: console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p1 rootwait init=/bin/sh [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 94104K/130048K available (6215K kernel code, 739K rwdata, 2172K rodata, 440K init, 8220K bss, 19560K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0839094 (8389 kB) [ 0.000000] .init : 0xc083a000 - 0xc08a8000 ( 440 kB) [ 0.000000] .data : 0xc08a8000 - 0xc0960e18 ( 740 kB) [ 0.000000] .bss : 0xc0963000 - 0xc116a350 (8221 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 3.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/DPLL/MPU): 13.0/532/266 MHz [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000091] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000671] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present. [ 0.003387] Console: colour dummy device 80x30 [ 0.003570] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003601] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003631] ... MAX_LOCK_DEPTH: 48 [ 0.003662] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003692] ... CLASSHASH_SIZE: 4096 [ 0.003723] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003753] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003784] ... CHAINHASH_SIZE: 32768 [ 0.003814] memory used by lock dependency info: 5167 kB [ 0.003845] per task-struct memory footprint: 1152 bytes [ 0.003906] Calibrating delay loop... 262.96 BogoMIPS (lpj=1314816) [ 0.124633] pid_max: default: 32768 minimum: 301 [ 0.125885] Security Framework initialized [ 0.126434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.126525] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.139099] Initializing cgroup subsys blkio [ 0.139221] Initializing cgroup subsys memory [ 0.139495] Initializing cgroup subsys devices [ 0.139831] Initializing cgroup subsys freezer [ 0.140380] Initializing cgroup subsys perf_event [ 0.140655] CPU: Testing write buffer coherency: ok [ 0.146606] missing device node for CPU 0 [ 0.146667] CPU0: thread -1, cpu 0, socket -1, mpidr 4107b366 [ 0.146942] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.164154] Brought up 1 CPUs [ 0.164215] SMP: Total of 1 processors activated (262.96 BogoMIPS). [ 0.164245] CPU: All CPU(s) started in SVC mode. [ 0.178924] devtmpfs: initialized [ 0.209442] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2 [ 0.335266] omap_hwmod: usb_otg_hs: _wait_target_ready failed: -16 [ 0.335327] omap_hwmod: usb_otg_hs: cannot be enabled for reset (3) [ 0.357910] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.366210] pinctrl core: initialized pinctrl subsystem [ 0.551940] NET: Registered protocol family 16 [ 0.577728] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.585845] cpuidle: using governor ladder [ 0.585968] cpuidle: using governor menu [ 0.662200] omap_gpio 4900c000.gpio: Could not get gpio dbck [ 0.666137] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.670013] OMAP GPIO hardware version 2.4 [ 0.673095] omap_gpio 4900e000.gpio: Could not get gpio dbck [ 0.674896] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.680603] omap_gpio 49010000.gpio: Could not get gpio dbck [ 0.681854] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.687866] omap_gpio 49012000.gpio: Could not get gpio dbck [ 0.689117] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.695343] omap_gpio 480b6000.gpio: Could not get gpio dbck [ 0.696685] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.702941] omap-gpmc 6e000000.gpmc: GPMC revision 3.0 [ 0.720947] No ATAGs? [ 0.721130] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.721191] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.729797] OMAP DMA hardware revision 4.0 [ 0.950012] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.964508] SCSI subsystem initialized [ 0.966766] libata version 3.00 loaded. [ 0.977264] omap_i2c 48070000.i2c: bus 0 rev3.3 at 100 kHz [ 0.983520] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 1.001312] Switched to clocksource 32k_counter [ 1.627410] NET: Registered protocol family 2 [ 1.635009] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 1.635559] TCP bind hash table entries: 1024 (order: 3, 36864 bytes) [ 1.636962] TCP: Hash tables configured (established 1024 bind 1024) [ 1.637695] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.638488] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.642608] NET: Registered protocol family 1 [ 1.649169] RPC: Registered named UNIX socket transport module. [ 1.649230] RPC: Registered udp transport module. [ 1.649261] RPC: Registered tcp transport module. [ 1.649291] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.656066] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 1.656341] hw perfevents: enabled with armv6_1136 PMU driver, 3 counters available [ 1.676818] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.677642] audit: initializing netlink subsys (disabled) [ 1.678497] audit: type=2000 audit(1.660:1): initialized [ 1.696258] VFS: Disk quotas dquot_6.6.0 [ 1.696777] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.707672] NFS: Registering the id_resolver key type [ 1.709503] Key type id_resolver registered [ 1.709564] Key type id_legacy registered [ 1.710327] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.734069] io scheduler noop registered [ 1.734161] io scheduler deadline registered [ 1.734344] io scheduler cfq registered (default) [ 1.743927] pinctrl-single 49002030.pinmux: 340 pins at pa fb002030 size 340 [ 1.753295] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.777893] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.777954] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.779937] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 2.638366] console [ttyO0] enabled [ 2.651367] omap_uart 4806c000.serial: no wakeirq for uart1 [ 2.657287] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 2.668243] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 2.683044] omap_uart 4806e000.serial: no wakeirq for uart2 [ 2.688964] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 2.699920] 4806e000.serial: ttyO2 at MMIO 0x4806e000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.828002] brd: module loaded [ 2.902374] loop: module loaded [ 2.951538] twl 1-0048: PIH (irq 23) chaining IRQs 274..282 [ 2.958801] twl 1-0048: power (irq 279) chaining IRQs 282..289 [ 3.153869] twl4030_gpio twl4030-gpio: gpio (irq 274) chaining IRQs 290..307 [ 3.163909] gpiochip_find_base: found new base at 494 [ 3.171691] gpiochip_add: registered GPIOs 494 to 511 on device: twl4030 [ 3.203674] mtdoops: mtd device (mtddev=name/number) must be supplied [ 3.235900] smc91x 8000300.ethernet: GPIO lookup for consumer power [ 3.242736] smc91x 8000300.ethernet: using device tree for GPIO lookup [ 3.249694] of_get_named_gpiod_flags: can't parse 'power-gpios' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 3.261138] of_get_named_gpiod_flags: can't parse 'power-gpio' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 3.272460] smc91x 8000300.ethernet: using lookup tables for GPIO lookup [ 3.280151] smc91x 8000300.ethernet: lookup for GPIO power failed [ 3.286804] smc91x 8000300.ethernet: GPIO lookup for consumer reset [ 3.293548] smc91x 8000300.ethernet: using device tree for GPIO lookup [ 3.300506] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 3.312133] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/gpmc@6e000000/ethernet@gpmc[0]' [ 3.323455] smc91x 8000300.ethernet: using lookup tables for GPIO lookup [ 3.330657] smc91x 8000300.ethernet: lookup for GPIO reset failed [ 3.337554] smc91x 8000300.ethernet (unnamed net_device) (uninitialized): smc91x: IOADDR c890a300 doesn't match configuration (0). [ 3.350158] smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre [ 3.366424] smc91x 8000300.ethernet eth0: SMC91C94 (rev 9) at c890a300 IRQ 261 [ 3.374267] [ 3.375885] smc91x 8000300.ethernet eth0: Ethernet addr: 10:03:31:33:16:8f [ 3.397644] mousedev: PS/2 mouse device common for all mice [ 3.403839] i2c /dev entries driver [ 3.421661] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.428039] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.435150] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.444946] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.454620] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.461853] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.468048] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.474517] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.481506] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.491271] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.500915] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.508026] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 3.572631] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 3.579010] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.586090] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.595886] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.605499] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.612701] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 3.618896] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.625335] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.632354] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.642089] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.651733] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.658843] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.666198] 480b4000.mmc supply vmmc not found, using dummy regulator [ 3.673980] omap_hsmmc 480b4000.mmc: could not set regulator OCR (-22) [ 3.682525] omap_hsmmc 480b4000.mmc: could not set regulator OCR (-22) [ 3.722259] ledtrig-cpu: registered to indicate activity on CPUs [ 3.733367] oprofile: using arm/armv6 [ 3.740264] Initializing XFRM netlink socket [ 3.745605] NET: Registered protocol family 17 [ 3.750823] NET: Registered protocol family 15 [ 3.757049] Key type dns_resolver registered [ 3.762329] SmartReflex Class3 initialized [ 3.801757] hctosys: unable to open rtc device (rtc0) [ 3.807128] sr_init: No PMIC hook to init smartreflex [ 3.813629] sr_init: platform driver register failed for SR [ 3.958129] VUSB3V1: disabling [ 3.965057] VUSB1V8: disabling [ 3.971893] VUSB1V5: disabling [ 3.997467] Waiting for root device /dev/mmcblk0p1...