0 U-Boot# U-Boot# ver U-Boot 2013.01-00161-g6e787b7 (Feb 06 2013 - 15:10:23) arm-none-eabi-gcc (Sourcery G++ Lite 2011.03-42) 4.5.2 GNU ld (Sourcery G++ Lite 2011.03-42) 2.20.51.20100809 U-Boot# setenv bootargs console=ttyO0,115200n8 debug ignore_loglevel earlyprintk=serial init=/bin/sh mem=128M root=/dev/ram rw initrd=0x82000000,16MB ramdisk_size=65536 U-Boot# U-Boot# setenv serverip 192.168.57.1 U-Boot# U-Boot# setenv bootfile uImage-dtb.am335x-bone U-Boot# U-Boot# dhcp 81000000 link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.57.137 Using cpsw device TFTP from server 192.168.57.1; our IP address is 192.168.57.137 Filename 'uImage-dtb.am335x-bone'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################# 740.2 KiB/s done Bytes transferred = 3344649 (330909 hex) U-Boot# mmc rescan 0 U-Boot# U-Boot# fatload mmc 0 82000000 ramdisk-pm.gz reading ramdisk-pm.gz 2022580 bytes read in 238 ms (8.1 MiB/s) U-Boot# U-Boot# bootm 81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3344585 Bytes = 3.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-rc6 (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Jun 1 01:24:21 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x87000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c08cc4c0, node_mem_map c6ed1000 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES1.0 (sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @c6ea5000 s22848 r8192 d22208 u53248 [ 0.000000] pcpu-alloc: s22848 r8192 d22208 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyO0,115200n8 debug ignore_loglevel earlyprintk=serial init=/bin/sh mem=128M root=/dev/ram rw initrd=0x82000000,16MB ramdisk_size=65536 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 79548K/131072K available (6105K kernel code, 490K rwdata, 2036K rodata, 368K init, 8218K bss, 35140K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07fb920 (8143 kB) [ 0.000000] .init : 0xc07fc000 - 0xc0858000 ( 368 kB) [ 0.000000] .data : 0xc0858000 - 0xc08d2b18 ( 491 kB) [ 0.000000] .bss : 0xc08d5000 - 0xc10db950 (8219 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000022] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000056] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000129] OMAP clocksource: timer1 at 24000000 Hz [ 0.001532] Console: colour dummy device 80x30 [ 0.001623] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001639] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001653] ... MAX_LOCK_DEPTH: 48 [ 0.001667] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001680] ... CLASSHASH_SIZE: 4096 [ 0.001693] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001707] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001720] ... CHAINHASH_SIZE: 32768 [ 0.001734] memory used by lock dependency info: 5167 kB [ 0.001748] per task-struct memory footprint: 1152 bytes [ 0.001789] Calibrating delay loop... 545.58 BogoMIPS (lpj=2727936) [ 0.098004] pid_max: default: 32768 minimum: 301 [ 0.098610] Security Framework initialized [ 0.098887] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.098921] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.104006] Initializing cgroup subsys blkio [ 0.104069] Initializing cgroup subsys memory [ 0.104219] Initializing cgroup subsys devices [ 0.104384] Initializing cgroup subsys freezer [ 0.104589] Initializing cgroup subsys perf_event [ 0.104704] CPU: Testing write buffer coherency: ok [ 0.107073] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.107246] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.114159] Brought up 1 CPUs [ 0.114198] SMP: Total of 1 processors activated (545.58 BogoMIPS). [ 0.114217] CPU: All CPU(s) started in SVC mode. [ 0.120077] devtmpfs: initialized [ 0.123976] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.195546] omap_hwmod: tptc0 using broken dt data from edma [ 0.196318] omap_hwmod: tptc1 using broken dt data from edma [ 0.197066] omap_hwmod: tptc2 using broken dt data from edma [ 0.209687] omap_hwmod: debugss: _wait_target_disable failed [ 0.268795] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.272711] pinctrl core: initialized pinctrl subsystem [ 0.330770] NET: Registered protocol family 16 [ 0.341593] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.345190] cpuidle: using governor ladder [ 0.345233] cpuidle: using governor menu [ 0.358198] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.359737] OMAP GPIO hardware version 0.1 [ 0.361891] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.365357] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.368702] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.389030] No ATAGs? [ 0.389079] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.461995] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.463225] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]' [ 0.469162] SCSI subsystem initialized [ 0.470469] libata version 3.00 loaded. [ 0.472290] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.479661] Switched to clocksource timer1 [ 0.742674] NET: Registered protocol family 2 [ 0.745919] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.746168] TCP bind hash table entries: 1024 (order: 3, 36864 bytes) [ 0.746802] TCP: Hash tables configured (established 1024 bind 1024) [ 0.747125] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.747476] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.749156] NET: Registered protocol family 1 [ 0.752162] RPC: Registered named UNIX socket transport module. [ 0.752197] RPC: Registered udp transport module. [ 0.752215] RPC: Registered tcp transport module. [ 0.752232] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.754941] Trying to unpack rootfs image as initramfs... [ 0.757923] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.956504] Freeing initrd memory: 16384K (c2000000 - c3000000) [ 0.957321] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 0.957487] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.965249] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.965771] audit: initializing netlink subsys (disabled) [ 0.966216] audit: type=2000 audit(0.960:1): initialized [ 0.973965] VFS: Disk quotas dquot_6.6.0 [ 0.974212] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.978165] NFS: Registering the id_resolver key type [ 0.978837] Key type id_resolver registered [ 0.978862] Key type id_legacy registered [ 0.979189] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.987757] io scheduler noop registered [ 0.987815] io scheduler deadline registered [ 0.987906] io scheduler cfq registered (default) [ 0.991411] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.995050] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.005235] omap_uart 44e09000.serial: no wakeirq for uart0 [ 1.005283] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@44e09000[0]' [ 1.006243] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 154, base_baud = 3000000) is a OMAP UART0 [ 1.819728] console [ttyO0] enabled [ 1.874613] brd: module loaded [ 1.908750] loop: module loaded [ 1.916036] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.931870] mousedev: PS/2 mouse device common for all mice [ 1.937759] i2c /dev entries driver [ 1.943985] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd [ 1.950444] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.957342] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0) [ 1.967844] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.972762] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 1.979056] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.985961] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 1.995574] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 2.005095] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 2.012406] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed [ 2.020173] omap_hsmmc 48060000.mmc: unable to get vmmc regulator -517 [ 2.028478] ledtrig-cpu: registered to indicate activity on CPUs [ 2.036388] oprofile: using arm/armv7 [ 2.041662] Initializing XFRM netlink socket [ 2.046384] NET: Registered protocol family 17 [ 2.051302] NET: Registered protocol family 15 [ 2.056567] Key type dns_resolver registered [ 2.061512] omap_voltage_late_init: Voltage driver support not added [ 2.070132] ThumbEE CPU extension supported. [ 2.074669] Registering SWP/SWPB emulation handler [ 2.144018] tps65217 0-0024: TPS65217 ID 0xf version 1.1 [ 2.149912] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.157423] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd [ 2.163851] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 2.170800] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0) [ 2.181305] omap_hsmmc 48060000.mmc: Got CD GPIO [ 2.186163] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 2.192514] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 2.199363] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 2.209017] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 2.218530] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 2.225610] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed [ 2.338419] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.349744] mmc0: new high speed SDHC card at address 1234 [ 2.358993] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.365528] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.376313] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 2.385999] libphy: 4a101000.mdio: probed [ 2.390417] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.402262] cpsw 4a100000.ethernet: Detected MACID = d4:94:a1:90:76:28 [ 2.414061] hctosys: unable to open rtc device (rtc0) [ 2.454325] vmmcsd_fixed: disabling [ 2.466054] mmcblk0: p1 p2 [ 2.476580] RAMDISK: gzip image found at block 0 [ 3.021829] VFS: Mounted root (ext2 filesystem) on device 1:0. [ 3.029753] devtmpfs: mounted [ 3.034011] Freeing unused kernel memory: 368K (c07fc000 - c0858000) /bin/sh: can't access tty; job coîÿ/ # / # / #