Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################# done Bytes transferred = 3492649 (354b29 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3492585 Bytes = 3.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-rc6-143384-gc65b99f (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Jun 1 01:27:20 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c095a7c0, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @cfc3d000 s22976 r8192 d22080 u53248 [ 0.000000] pcpu-alloc: s22976 r8192 d22080 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 223836K/261120K available (6215K kernel code, 739K rwdata, 2172K rodata, 440K init, 8220K bss, 20900K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0839094 (8389 kB) [ 0.000000] .init : 0xc083a000 - 0xc08a8000 ( 440 kB) [ 0.000000] .data : 0xc08a8000 - 0xc0960e18 ( 740 kB) [ 0.000000] .bss : 0xc0963000 - 0xc116a350 (8221 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000029] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000075] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000188] OMAP clocksource: timer1 at 13000000 Hz [ 0.001705] Console: colour dummy device 80x30 [ 0.001803] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001819] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001834] ... MAX_LOCK_DEPTH: 48 [ 0.001848] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001862] ... CLASSHASH_SIZE: 4096 [ 0.001875] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001889] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001903] ... CHAINHASH_SIZE: 32768 [ 0.001916] memory used by lock dependency info: 5167 kB [ 0.001931] per task-struct memory footprint: 1152 bytes [ 0.001975] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.095500] pid_max: default: 32768 minimum: 301 [ 0.096167] Security Framework initialized [ 0.096431] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096460] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101860] Initializing cgroup subsys blkio [ 0.101931] Initializing cgroup subsys memory [ 0.102076] Initializing cgroup subsys devices [ 0.102233] Initializing cgroup subsys freezer [ 0.102457] Initializing cgroup subsys perf_event [ 0.102590] CPU: Testing write buffer coherency: ok [ 0.105075] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.105290] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.113476] Brought up 1 CPUs [ 0.113519] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.113538] CPU: All CPU(s) started in SVC mode. [ 0.120030] devtmpfs: initialized [ 0.135100] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.220833] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.223268] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.310221] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.310258] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.326262] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.330298] pinctrl core: initialized pinctrl subsystem [ 0.450501] NET: Registered protocol family 16 [ 0.461537] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.465685] cpuidle: using governor ladder [ 0.465749] cpuidle: using governor menu [ 0.475883] Reprogramming SDRC clock to 332000000 Hz [ 0.480307] In-band Error seen by MPU at address 0 [ 0.480339] ------------[ cut here ]------------ [ 0.480387] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.480403] Modules linked in: [ 0.480437] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.1.0-rc6-143384-gc65b99f #1 [ 0.480455] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.480502] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.480537] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.480569] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.480597] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.480624] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.480662] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.480692] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.480724] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.480752] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.480778] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.480806] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.480842] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.480861] Exception stack(0xce0a3d00 to 0xce0a3d48) [ 0.480888] 3d00: 00000001 ce0a1138 00000000 ce0a0b80 60000153 ce013c60 ce013c60 00000000 [ 0.480912] 3d20: 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d48 c008de08 c05e47a4 [ 0.480929] 3d40: 20000153 ffffffff [ 0.480959] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.480989] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.481018] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.481047] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.481087] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.481117] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.481145] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.481172] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.481198] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.481224] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.481256] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.481284] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.481310] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.481345] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.481373] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.481402] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.481430] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d4) [ 0.481470] [] (do_one_initcall) from [] (kernel_init_freeable+0x1f4/0x2cc) [ 0.481513] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.481549] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.481724] ---[ end trace 04589a197ed7d4aa ]--- [ 0.481778] In-band Error seen by USB_OTG at address 0 [ 0.481794] ------------[ cut here ]------------ [ 0.481821] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.481836] Modules linked in: [ 0.481863] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.1.0-rc6-143384-gc65b99f #1 [ 0.481879] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.481910] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.481937] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.481964] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.481989] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.482016] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.482046] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.482074] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.482103] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.482130] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.482155] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.482181] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.482210] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.482227] Exception stack(0xce0a3d00 to 0xce0a3d48) [ 0.482252] 3d00: 00000001 ce0a1138 00000000 ce0a0b80 60000153 ce013c60 ce013c60 00000000 [ 0.482277] 3d20: 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d48 c008de08 c05e47a4 [ 0.482294] 3d40: 20000153 ffffffff [ 0.482323] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.482353] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.482381] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.482409] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.482441] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.482470] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.482497] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.482523] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.482550] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.482575] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.482603] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.482629] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.482656] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.482684] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.482710] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.482737] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.482763] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d4) [ 0.482794] [] (do_one_initcall) from [] (kernel_init_freeable+0x1f4/0x2cc) [ 0.482826] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.482855] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.482873] ---[ end trace 04589a197ed7d4ab ]--- [ 0.488047] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.497005] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.498706] OMAP GPIO hardware version 2.5 [ 0.501226] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.504761] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.508375] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.511851] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.515243] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.533659] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.534632] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.548391] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.552167] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.720604] No ATAGs? [ 0.720658] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.725852] OMAP DMA hardware revision 4.0 [ 0.832704] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.834268] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.836033] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.837304] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.838613] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.840074] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.840388] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.841623] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.841890] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.843103] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.851031] SCSI subsystem initialized [ 0.852420] libata version 3.00 loaded. [ 0.853664] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.853823] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.854729] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.858658] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.859110] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.867280] Switched to clocksource timer1 [ 1.141175] NET: Registered protocol family 2 [ 1.144606] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.144867] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.146009] TCP: Hash tables configured (established 2048 bind 2048) [ 1.146394] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.146721] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.148631] NET: Registered protocol family 1 [ 1.151770] RPC: Registered named UNIX socket transport module. [ 1.151810] RPC: Registered udp transport module. [ 1.151830] RPC: Registered tcp transport module. [ 1.151849] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.159028] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 1.159227] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.169696] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.170106] audit: initializing netlink subsys (disabled) [ 1.170533] audit: type=2000 audit(1.170:1): initialized [ 1.179083] VFS: Disk quotas dquot_6.6.0 [ 1.179333] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.184174] NFS: Registering the id_resolver key type [ 1.184904] Key type id_resolver registered [ 1.184933] Key type id_legacy registered [ 1.185271] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.194753] io scheduler noop registered [ 1.194813] io scheduler deadline registered [ 1.194912] io scheduler cfq registered (default) [ 1.199973] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.200951] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.209010] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.221380] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.221431] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.222523] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.226025] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.226073] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.226583] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.229821] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.229869] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.230392] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.988528] console [ttyO2] enabled [ 3.050541] brd: module loaded [ 3.087658] loop: module loaded [ 3.096008] mtdoops: mtd device (mtddev=name/number) must be supplied [ 3.105508] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 3.112303] nand: Samsung NAND 512MiB 3,3V 8-bit [ 3.117206] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 3.125320] 5 ofpart partitions found on MTD device omap2-nand.0 [ 3.131674] Creating 5 MTD partitions on "omap2-nand.0": [ 3.137303] 0x000000000000-0x000000080000 : "xloader" [ 3.153007] 0x000000080000-0x000000260000 : "uboot" [ 3.165662] 0x000000260000-0x0000002a0000 : "uboot environment" [ 3.177919] 0x0000002a0000-0x0000006a0000 : "linux" [ 3.192262] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.675745] libphy: smsc911x-mdio: probed [ 3.680774] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.694316] smsc911x 2d000000.ethernet eth0: MAC Address: d2:fb:ed:14:b0:f7 [ 3.746890] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.753383] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.764458] libphy: davinci_mdio.0: probed [ 3.768968] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.777610] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.791953] mousedev: PS/2 mouse device common for all mice [ 3.798017] i2c /dev entries driver [ 3.808018] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.814336] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.821474] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.831893] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.836804] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.843098] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.850047] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.860413] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.908674] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.914992] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.921974] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.931608] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.941132] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.948571] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.955581] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.964146] ledtrig-cpu: registered to indicate activity on CPUs [ 3.973048] oprofile: using arm/armv7 [ 3.978487] Initializing XFRM netlink socket [ 3.983245] NET: Registered protocol family 17 [ 3.988186] NET: Registered protocol family 15 [ 3.993504] Key type dns_resolver registered [ 3.998554] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 4.006123] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 4.012279] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 4.019618] omap2_set_init_voltage: unable to set vdd_core [ 4.027563] PM: no software I/O chain control; some wakeups may be lost [ 4.034566] pm: Failed to request pm_wkup irq [ 4.039318] ThumbEE CPU extension supported. [ 4.043854] Registering SWP/SWPB emulation handler [ 4.048961] SmartReflex Class3 initialized [ 4.074498] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 4.087215] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 4.098695] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 4.105551] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 4.112871] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 4.123009] no flags found for reset [ 4.126840] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 4.134221] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 4.141396] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 4.151290] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 4.161089] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 4.168454] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 4.177625] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 4.184477] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 4.191799] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 4.201916] no flags found for reset [ 4.205679] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 4.213123] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 4.220296] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 4.230190] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 4.239986] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 4.247339] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 4.262501] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 4.273869] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 4.281337] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.287787] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.294643] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.304273] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.313794] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.320876] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.341443] mmc0: new high speed SDHC card at address b368 [ 4.351172] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 4.365365] mmcblk0: p1 p2 [ 4.435475] hctosys: unable to open rtc device (rtc0) [ 4.440996] sr_init: No PMIC hook to init smartreflex [ 4.446952] sr_init: platform driver register failed for SR [ 4.538182] ads7846-reg: disabling [ 4.541801] hsusb2_vbus: disabling [ 4.545374] hsusb1_vbus: disabling [ 4.549389] In-band Error seen by MPU at address 0 [ 4.554504] ------------[ cut here ]------------ [ 4.559360] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 4.568636] Modules linked in: [ 4.571857] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.1.0-rc6-143384-gc65b99f #1 [ 4.581047] Hardware name: Generic AM3517 (Flattened Device Tree) [ 4.587461] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 4.595575] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 4.603147] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 4.611618] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 4.620816] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 4.629756] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 4.639139] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 4.648432] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 4.657173] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 4.666007] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 4.675112] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 4.684408] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 4.692777] Exception stack(0xce0a3dc8 to 0xce0a3e10) [ 4.698066] 3dc0: 00000001 ce0a1138 00000000 ce0a0b80 60000113 c0941b18 [ 4.706620] 3de0: ce592500 c0963000 c04cc69c 00000090 00000000 00000000 c0a989e0 ce0a3e10 [ 4.715178] 3e00: c008dce4 c05e47a4 20000113 ffffffff [ 4.720475] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 4.729498] [] (_raw_spin_unlock_irqrestore) from [] (clk_disable_unused_subtree+0x30/0x180) [ 4.740143] ---[ end trace 04589a197ed7d4ad ]--- [ 4.779683] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.793077] devtmpfs: mounted [ 4.798018] Freeing unused kernel memory: 440K (c083a000 - c08a8000) /bin/sh: can't access tty; job control turned off # # #