U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 6(SOH)/3407(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00353de8 = 3489256 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3489192 Bytes = 3.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-rc7-143548-gd4a4f75 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Jun 7 23:06:58 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c095a780, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @eee96000 s22976 r8192 d22080 u53248 [ 0.000000] pcpu-alloc: s22976 r8192 d22080 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260178 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1002872K/1047552K available (6215K kernel code, 739K rwdata, 2172K rodata, 440K init, 8220K bss, 28296K reserved, 16384K cma-reserved, 252928K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08390a4 (8389 kB) [ 0.000000] .init : 0xc083a000 - 0xc08a8000 ( 440 kB) [ 0.000000] .data : 0xc08a8000 - 0xc0960dc0 ( 740 kB) [ 0.000000] .bss : 0xc0963000 - 0xc116a350 (8221 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002105] Console: colour dummy device 80x30 [ 0.002136] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002166] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002166] ... MAX_LOCK_DEPTH: 48 [ 0.002166] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002197] ... CLASSHASH_SIZE: 4096 [ 0.002197] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002197] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002197] ... CHAINHASH_SIZE: 32768 [ 0.002227] memory used by lock dependency info: 5167 kB [ 0.002227] per task-struct memory footprint: 1152 bytes [ 0.002258] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080352] pid_max: default: 32768 minimum: 301 [ 0.080718] Security Framework initialized [ 0.080871] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080902] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084167] Initializing cgroup subsys blkio [ 0.084197] Initializing cgroup subsys memory [ 0.084289] Initializing cgroup subsys devices [ 0.084381] Initializing cgroup subsys freezer [ 0.084503] Initializing cgroup subsys perf_event [ 0.084594] CPU: Testing write buffer coherency: ok [ 0.085998] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086120] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180297] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181152] Brought up 2 CPUs [ 0.181182] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181182] CPU: All CPU(s) started in SVC mode. [ 0.184661] devtmpfs: initialized [ 0.240417] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.245239] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.249755] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.429290] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.431579] pinctrl core: initialized pinctrl subsystem [ 0.436737] NET: Registered protocol family 16 [ 0.442352] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.470520] cpuidle: using governor ladder [ 0.500366] cpuidle: using governor menu [ 0.513671] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.514526] OMAP GPIO hardware version 0.1 [ 0.515838] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.517761] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.519592] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.521575] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.523437] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.544189] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.544708] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.552612] No ATAGs? [ 0.552703] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.552703] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.555816] OMAP DMA hardware revision 0.0 [ 0.639801] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.640716] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.641632] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.645935] SCSI subsystem initialized [ 0.646484] libata version 3.00 loaded. [ 0.647186] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.647735] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.647827] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.647918] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.652496] Switched to clocksource 32k_counter [ 0.803985] NET: Registered protocol family 2 [ 0.806121] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.806396] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.808929] TCP: Hash tables configured (established 8192 bind 8192) [ 0.809234] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.809600] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.810699] NET: Registered protocol family 1 [ 0.812255] RPC: Registered named UNIX socket transport module. [ 0.812286] RPC: Registered udp transport module. [ 0.812286] RPC: Registered tcp transport module. [ 0.812286] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.817016] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 0.817108] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.822753] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.823059] audit: initializing netlink subsys (disabled) [ 0.823333] audit: type=2000 audit(0.810:1): initialized [ 0.828186] VFS: Disk quotas dquot_6.6.0 [ 0.828308] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.830993] NFS: Registering the id_resolver key type [ 0.831481] Key type id_resolver registered [ 0.831512] Key type id_legacy registered [ 0.831695] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.836853] bounce: pool size: 64 pages [ 0.836975] io scheduler noop registered [ 0.837005] io scheduler deadline registered [ 0.837036] io scheduler cfq registered (default) [ 0.840667] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.841369] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.846588] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.852630] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.852630] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.853210] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.855194] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.855224] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.855468] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.856658] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.856658] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.856933] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.858337] console [ttyO2] enabled [ 1.888641] brd: module loaded [ 1.909393] loop: module loaded [ 1.915557] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.929077] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.939514] spi1.0 supply vdd-io not found, using dummy regulator [ 1.946380] spi1.0 supply vdd not found, using dummy regulator [ 1.952697] ks8851 spi1.0: message enable is 0 [ 1.963623] ks8851 spi1.0 eth0: revision 1, MAC 3a:29:fb:7e:74:cb, IRQ 202, no EEPROM [ 1.976104] mousedev: PS/2 mouse device common for all mice [ 1.981933] i2c /dev entries driver [ 1.987243] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.993560] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.000427] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.010009] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.019500] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.026672] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.032836] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.039123] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.045959] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.055541] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.065032] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.072052] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.078857] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.086517] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.092834] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.099670] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.109252] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.118713] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.125762] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.132415] omap_hsmmc 480d1000.mmc: unable to get vmmc regulator -517 [ 2.139648] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.145965] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.152862] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.163238] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.168060] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.174377] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.181213] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.190795] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.200286] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.207336] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.253326] ledtrig-cpu: registered to indicate activity on CPUs [ 2.261169] oprofile: using arm/armv7-ca9 [ 2.266235] Initializing XFRM netlink socket [ 2.270874] NET: Registered protocol family 17 [ 2.275665] NET: Registered protocol family 15 [ 2.280792] Key type dns_resolver registered [ 2.285644] twl: not initialized [ 2.289031] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.297454] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.305877] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.314270] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.322723] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.331115] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.339508] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.347930] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.355163] omap2_set_init_voltage: unable to set vdd_mpu [ 2.360839] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.368133] omap2_set_init_voltage: unable to set vdd_core [ 2.373931] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.381134] omap2_set_init_voltage: unable to set vdd_iva [ 2.388977] Power Management for TI OMAP4+ devices. [ 2.394134] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.402404] ThumbEE CPU extension supported. [ 2.402404] Registering SWP/SWPB emulation handler [ 2.402404] SmartReflex Class3 initialized [ 2.422454] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.433929] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.434661] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.447875] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.454559] no flags found for reset [ 2.454559] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.469146] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.476257] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.486114] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.495880] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.503204] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.507141] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.509094] mmc0: new high speed SDHC card at address b368 [ 2.519256] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.527496] mmcblk0: p1 p2 [ 2.535858] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.563842] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.570739] twl 0-0048: PIH (irq 327) nested IRQs [ 2.591003] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.597991] VUSIM: failed to get the current voltage(-22) [ 2.607513] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.607513] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.639251] twl6040 0-004b: clk32k is not handled [ 2.649353] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.664886] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.674407] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.682403] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.689056] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.696014] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.702880] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.712463] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.721923] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.728973] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.735107] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.741394] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.748260] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.757843] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.757873] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.774353] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.823028] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.823028] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.836791] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.846374] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.855865] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.862884] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.900421] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.911224] mmc1: new high speed SDHC card at address 0007 [ 2.918060] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.925628] mmcblk1: p1 p2 [ 2.984619] hctosys: unable to open rtc device (rtc0) [ 2.987548] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 2.998474] sr_init: No PMIC hook to init smartreflex [ 3.001800] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.005340] mmc2: new SDIO card at address 0001 [ 3.014709] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.023284] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.031951] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.085144] VUSB: disabling [ 3.088836] VANA: disabling [ 3.092681] VDAC: disabling [ 3.098205] VAUX1_6030: disabling [ 3.101867] vwl1271: disabling [ 3.111663] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 3.124206] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.162384] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.171661] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 7.577697] EXT4-fs (mmcblk1p2): recovery complete [ 7.591217] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.599914] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.613616] devtmpfs: mounted [ 7.617919] Freeing unused kernel memory: 440K (c083a000 - c08a8000) [ 7.934173] random: init urandom read with 28 bits of entropy available [ 7.956787] init: Failed to create pty - disabling logging for job [ 7.965179] init: Temporary process spawn error: No space left on device [ 8.017425] init: Failed to create pty - disabling logging for job [ 8.023956] init: Temporary process spawn error: No space left on device [ 8.045043] init: Failed to create pty - disabling logging for job [ 8.051971] init: Temporary process spawn error: No space left on device [ 8.063018] init: Failed to create pty - disabling logging for job [ 8.071228] init: Temporary process spawn error: No space left on device [ 8.194305] init: ureadahead main process (58) terminated with status 5 [ 8.429290] init: Failed to create pty - disabling logging for job [ 8.438049] init: Temporary process spawn error: No space left on device [ 8.479949] init: Failed to create pty - disabling logging for job [ 8.486907] init: Temporary process spawn error: No space left on device [ 8.586486] init: Failed to create pty - disabling logging for job [ 8.593872] init: Temporary process spawn error: No space left on device [ 9.297027] udevd[114]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177372/963584 files, 2987686/7708672 blocks [ 12.590728] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 13.524291] init: udev-fallback-graphics main process (463) terminated with status 1 [ 13.845581] init: plymouth main process (59) killed by SEGV signal [ 13.860565] init: plymouth-splash main process (483) terminated with status 2 [ 13.878662] random: nonblocking pool is initialized [ 13.895385] init: plymouth-log main process (499) terminated with status 1 [ 13.944305] init: failsafe main process (500) killed by TERM signal [ 14.666778] init: plymouth-upstart-bridge main process (537) terminated with status 1 [ 14.961669] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS [ 15.115692] init: bluetooth main process (544) terminated with status 1 [ 15.123840] init: bluetooth main process ended, respawning [ 15.496337] init: bluetooth main process (601) terminated with status 1 [ 15.504150] init: bluetooth main process ended, respawning speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 16.757415] init: alsa-restore main process (643) terminated with status 19 [ 16.813262] init: hybrid-gfx main process (656) terminated with status 1 FATAL: Could not load /lib/modules/4.1.0-rc7-143548-gd4a4f75/modules.dep: No such file or directory [ 17.334136] init: bluetooth main process (716) terminated with status 1 [ 17.347290] init: bluetooth main process ended, respawning [ 18.081024] init: bluetooth main process (772) terminated with status 1 [ 18.088592] init: bluetooth main process ended, respawning [ 18.513366] init: bluetooth main process (795) terminated with status 1 [ 18.521545] init: bluetooth main process ended, respawning [ 18.754486] init: bluetooth main process (818) terminated with status 1 Ubuntu 12.04.1 LTS variscite-desktop ttyO2 [ 18.764739] init: bluetooth main process ended, respawning variscite-desktop login: [ 19.005310] init: bluetooth main process (843) terminated with status 1 [ 19.013549] init: bluetooth main process ended, respawning [ 19.218475] init: bluetooth main process (866) terminated with status 1 [ 19.226196] init: bluetooth main process ended, respawning