Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################# done Bytes transferred = 3491977 (354889 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3491913 Bytes = 3.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-rc7-143548-gd4a4f75 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Jun 7 23:06:58 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c095a780, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @cfc3d000 s22976 r8192 d22080 u53248 [ 0.000000] pcpu-alloc: s22976 r8192 d22080 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 223836K/261120K available (6215K kernel code, 739K rwdata, 2172K rodata, 440K init, 8220K bss, 20900K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08390a4 (8389 kB) [ 0.000000] .init : 0xc083a000 - 0xc08a8000 ( 440 kB) [ 0.000000] .data : 0xc08a8000 - 0xc0960dc0 ( 740 kB) [ 0.000000] .bss : 0xc0963000 - 0xc116a350 (8221 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000031] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000075] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000187] OMAP clocksource: timer1 at 13000000 Hz [ 0.001691] Console: colour dummy device 80x30 [ 0.001790] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001808] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001822] ... MAX_LOCK_DEPTH: 48 [ 0.001837] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001851] ... CLASSHASH_SIZE: 4096 [ 0.001865] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001878] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001892] ... CHAINHASH_SIZE: 32768 [ 0.001906] memory used by lock dependency info: 5167 kB [ 0.001920] per task-struct memory footprint: 1152 bytes [ 0.001964] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.095575] pid_max: default: 32768 minimum: 301 [ 0.096259] Security Framework initialized [ 0.096523] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096552] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101944] Initializing cgroup subsys blkio [ 0.102016] Initializing cgroup subsys memory [ 0.102162] Initializing cgroup subsys devices [ 0.102319] Initializing cgroup subsys freezer [ 0.102542] Initializing cgroup subsys perf_event [ 0.102675] CPU: Testing write buffer coherency: ok [ 0.105141] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.105374] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.113532] Brought up 1 CPUs [ 0.113573] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.113592] CPU: All CPU(s) started in SVC mode. [ 0.120108] devtmpfs: initialized [ 0.247872] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.330800] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.333182] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.418117] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.418155] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.434094] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.438340] pinctrl core: initialized pinctrl subsystem [ 0.447337] NET: Registered protocol family 16 [ 0.458458] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.462382] cpuidle: using governor ladder [ 0.462433] cpuidle: using governor menu [ 0.472653] Reprogramming SDRC clock to 332000000 Hz [ 0.477242] In-band Error seen by MPU at address 0 [ 0.477272] ------------[ cut here ]------------ [ 0.477319] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.477336] Modules linked in: [ 0.477371] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.1.0-rc7-143548-gd4a4f75 #1 [ 0.477388] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.477436] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.477472] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.477503] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.477531] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.477558] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.477597] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.477626] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.477659] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.477686] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.477712] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.477741] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.477776] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.477795] Exception stack(0xce0a3d00 to 0xce0a3d48) [ 0.477821] 3d00: 00000001 ce0a1138 00000000 ce0a0b80 60000153 ce013c60 ce013c60 00000000 [ 0.477845] 3d20: 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d48 c008de08 c05e4874 [ 0.477862] 3d40: 20000153 ffffffff [ 0.477892] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.477922] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.477951] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.477979] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.478018] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.478050] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.478078] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.478105] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.478132] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.478157] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.478189] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.478217] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.478242] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.478276] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.478305] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.478333] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.478361] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d4) [ 0.478393] [] (do_one_initcall) from [] (kernel_init_freeable+0x1f4/0x2cc) [ 0.478436] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.478470] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.478642] ---[ end trace 1a337152610bd24f ]--- [ 0.478694] In-band Error seen by USB_OTG at address 0 [ 0.478710] ------------[ cut here ]------------ [ 0.478738] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.478753] Modules linked in: [ 0.478781] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.1.0-rc7-143548-gd4a4f75 #1 [ 0.478797] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.478828] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.478856] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.478883] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.478909] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.478936] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.478965] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.478992] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.479020] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.479047] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.479073] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.479100] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.479128] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.479146] Exception stack(0xce0a3d00 to 0xce0a3d48) [ 0.479169] 3d00: 00000001 ce0a1138 00000000 ce0a0b80 60000153 ce013c60 ce013c60 00000000 [ 0.479192] 3d20: 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d48 c008de08 c05e4874 [ 0.479209] 3d40: 20000153 ffffffff [ 0.479237] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.479265] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.479293] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.479321] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.479350] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.479379] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.479407] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.479433] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.479459] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.479484] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.479511] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.479538] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.479563] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.479591] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.479617] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.479643] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.479669] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d4) [ 0.479699] [] (do_one_initcall) from [] (kernel_init_freeable+0x1f4/0x2cc) [ 0.479730] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.479760] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.479778] ---[ end trace 1a337152610bd250 ]--- [ 0.484701] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.493677] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.495357] OMAP GPIO hardware version 2.5 [ 0.498020] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.501547] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.504900] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.508583] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.511976] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.530337] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.531297] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.544840] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.548838] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.710663] No ATAGs? [ 0.710719] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.715926] OMAP DMA hardware revision 4.0 [ 0.823349] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.824940] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.826729] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.827985] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.829287] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.830744] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.831060] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.832292] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.832558] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.833765] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.841674] SCSI subsystem initialized [ 0.843077] libata version 3.00 loaded. [ 0.844326] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.844484] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.845387] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.849278] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.849733] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.857943] Switched to clocksource timer1 [ 1.130137] NET: Registered protocol family 2 [ 1.133524] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.133788] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.134930] TCP: Hash tables configured (established 2048 bind 2048) [ 1.135306] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.135632] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.137297] NET: Registered protocol family 1 [ 1.140637] RPC: Registered named UNIX socket transport module. [ 1.140677] RPC: Registered udp transport module. [ 1.140696] RPC: Registered tcp transport module. [ 1.140715] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.148117] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 1.148320] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.158823] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.159229] audit: initializing netlink subsys (disabled) [ 1.159659] audit: type=2000 audit(1.160:1): initialized [ 1.168109] VFS: Disk quotas dquot_6.6.0 [ 1.168358] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.173235] NFS: Registering the id_resolver key type [ 1.173984] Key type id_resolver registered [ 1.174012] Key type id_legacy registered [ 1.174346] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.183713] io scheduler noop registered [ 1.183768] io scheduler deadline registered [ 1.183862] io scheduler cfq registered (default) [ 1.189013] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.189896] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.198061] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.210520] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.210573] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.211390] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.215187] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.215238] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.215953] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.218765] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.218811] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.219325] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.977585] console [ttyO2] enabled [ 3.039739] brd: module loaded [ 3.076655] loop: module loaded [ 3.085134] mtdoops: mtd device (mtddev=name/number) must be supplied [ 3.094643] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 3.101431] nand: Samsung NAND 512MiB 3,3V 8-bit [ 3.106271] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 3.114442] 5 ofpart partitions found on MTD device omap2-nand.0 [ 3.120794] Creating 5 MTD partitions on "omap2-nand.0": [ 3.126372] 0x000000000000-0x000000080000 : "xloader" [ 3.142246] 0x000000080000-0x000000260000 : "uboot" [ 3.154894] 0x000000260000-0x0000002a0000 : "uboot environment" [ 3.166977] 0x0000002a0000-0x0000006a0000 : "linux" [ 3.181427] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.665607] libphy: smsc911x-mdio: probed [ 3.670631] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.684169] smsc911x 2d000000.ethernet eth0: MAC Address: 8a:d9:12:f7:21:b8 [ 3.737544] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.744037] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.755125] libphy: davinci_mdio.0: probed [ 3.759633] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.768268] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.782640] mousedev: PS/2 mouse device common for all mice [ 3.788699] i2c /dev entries driver [ 3.798732] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.805044] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.812186] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.822599] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.827516] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.833806] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.840757] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.851126] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.899330] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.905649] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.912626] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.922255] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.931778] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.939214] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.946223] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.954788] ledtrig-cpu: registered to indicate activity on CPUs [ 3.963751] oprofile: using arm/armv7 [ 3.969179] Initializing XFRM netlink socket [ 3.973942] NET: Registered protocol family 17 [ 3.978880] NET: Registered protocol family 15 [ 3.984218] Key type dns_resolver registered [ 3.989190] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.996752] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 4.002926] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 4.010274] omap2_set_init_voltage: unable to set vdd_core [ 4.018245] PM: no software I/O chain control; some wakeups may be lost [ 4.025250] pm: Failed to request pm_wkup irq [ 4.029978] ThumbEE CPU extension supported. [ 4.034515] Registering SWP/SWPB emulation handler [ 4.039642] SmartReflex Class3 initialized [ 4.064964] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 4.077658] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 4.089139] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 4.095985] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 4.103304] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 4.113431] no flags found for reset [ 4.117200] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 4.124650] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 4.131825] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 4.141719] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 4.151517] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 4.158879] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 4.167991] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 4.174842] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 4.182157] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 4.192275] no flags found for reset [ 4.196041] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 4.203479] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 4.210651] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 4.220543] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 4.230333] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 4.237680] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 4.253050] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 4.264371] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 4.271786] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.278233] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.285092] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.294711] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.304231] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.311310] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.331854] mmc0: new high speed SDHC card at address b368 [ 4.341682] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 4.355746] mmcblk0: p1 p2 [ 4.426296] hctosys: unable to open rtc device (rtc0) [ 4.431815] sr_init: No PMIC hook to init smartreflex [ 4.437757] sr_init: platform driver register failed for SR [ 4.528160] ads7846-reg: disabling [ 4.531777] hsusb2_vbus: disabling [ 4.535348] hsusb1_vbus: disabling [ 4.539358] In-band Error seen by MPU at address 0 [ 4.544467] ------------[ cut here ]------------ [ 4.549323] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 4.558599] Modules linked in: [ 4.561817] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.1.0-rc7-143548-gd4a4f75 #1 [ 4.571008] Hardware name: Generic AM3517 (Flattened Device Tree) [ 4.577419] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 4.585538] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 4.593107] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 4.601579] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 4.610775] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 4.619709] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 4.629092] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 4.638386] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 4.647131] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 4.655963] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 4.665071] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 4.674364] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 4.682734] Exception stack(0xce0a3dc8 to 0xce0a3e10) [ 4.688025] 3dc0: 00000001 ce0a1138 00000000 ce0a0b80 60000113 c0941ad8 [ 4.696584] 3de0: ce592500 c0963000 c04cc77c 00000090 00000000 00000000 c0a989e0 ce0a3e10 [ 4.705138] 3e00: c008dce4 c05e4874 20000113 ffffffff [ 4.710440] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 4.719460] [] (_raw_spin_unlock_irqrestore) from [] (clk_disable_unused_subtree+0x30/0x180) [ 4.730107] ---[ end trace 1a337152610bd252 ]--- [ 4.769658] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.783140] devtmpfs: mounted [ 4.788053] Freeing unused kernel memory: 440K (c083a000 - c08a8000) /bin/sh: can't access tty; job control turned off # # #