U-Boot SPL 2014.07-rc2-00015-g713ff68 (Jun 03 2014 - 09:09:41) OMAP5432 ES2.0 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img U-Boot 2014.07-rc2-00015-g713ff68 (Jun 03 2014 - 09:09:41), Build: jenkins-github_Bootloader-Builder-315 CPU : OMAP5432 ES2.0 Board: OMAP5432 uEVM I2C: ready DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: No ethernet found. Hit any key to stop autoboot: 5  0 U-Boot# U-Boot# setenv bootargs 'console=ttyO2,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh' U-Boot# loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap5-uevm Sending: Transfer complete - CRC mode, 7(SOH)/3403(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00352e28 = 3485224 Bytes U-Boot# bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3485160 Bytes = 3.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-rc8-143675-g0f57d86 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Jun 21 20:32:51 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI OMAP5 uEVM board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xfd800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 519936 [ 0.000000] free_area_init_node: node 0, pgdat c095a780, node_mem_map ee61d000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 325376 pages, LIFO batch:31 [ 0.000000] OMAP5432 ES2.0 [ 0.000000] PERCPU: Embedded 13 pages/cpu @ee5b0000 s22976 r8192 d22080 u53248 [ 0.000000] pcpu-alloc: s22976 r8192 d22080 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518226 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2025960K/2079744K available (6215K kernel code, 739K rwdata, 2172K rodata, 440K init, 8220K bss, 37400K reserved, 16384K cma-reserved, 1285120K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08390b4 (8389 kB) [ 0.000000] .init : 0xc083a000 - 0xc08a8000 ( 440 kB) [ 0.000000] .data : 0xc08a8000 - 0xc0960dc0 ( 740 kB) [ 0.000000] .bss : 0xc0963000 - 0xc116a350 (8221 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000488] Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000488] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16ac02862, max_idle_ns: 440795202218 ns [ 0.000523] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511085ns [ 0.000534] Switching to timer-based delay loop, resolution 162ns [ 0.001599] Console: colour dummy device 80x30 [ 0.001634] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001641] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001647] ... MAX_LOCK_DEPTH: 48 [ 0.001653] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001659] ... CLASSHASH_SIZE: 4096 [ 0.001665] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001670] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001676] ... CHAINHASH_SIZE: 32768 [ 0.001682] memory used by lock dependency info: 5167 kB [ 0.001688] per task-struct memory footprint: 1152 bytes [ 0.001707] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.28 BogoMIPS (lpj=61440) [ 0.001720] pid_max: default: 32768 minimum: 301 [ 0.001982] Security Framework initialized [ 0.002100] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002113] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004314] Initializing cgroup subsys blkio [ 0.004337] Initializing cgroup subsys memory [ 0.004396] Initializing cgroup subsys devices [ 0.004452] Initializing cgroup subsys freezer [ 0.004538] Initializing cgroup subsys perf_event [ 0.004592] CPU: Testing write buffer coherency: ok [ 0.005497] /cpus/cpu@0 missing clock-frequency property [ 0.005517] /cpus/cpu@1 missing clock-frequency property [ 0.005527] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005588] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.010191] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.010908] Brought up 2 CPUs [ 0.010922] SMP: Total of 2 processors activated (24.57 BogoMIPS). [ 0.010929] CPU: All CPU(s) started in SVC mode. [ 0.013054] devtmpfs: initialized [ 0.054647] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.055978] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.057234] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.167287] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.168335] pinctrl core: initialized pinctrl subsystem [ 0.171856] NET: Registered protocol family 16 [ 0.175352] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.201158] cpuidle: using governor ladder [ 0.231116] cpuidle: using governor menu [ 0.240664] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.241354] OMAP GPIO hardware version 0.1 [ 0.242258] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.243695] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.245115] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.246508] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.247913] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.249322] gpiochip_add: registered GPIOs 192 to 223 on device: gpio [ 0.250727] gpiochip_add: registered GPIOs 224 to 255 on device: gpio [ 0.251737] platform 50000000.gpmc: Cannot lookup hwmod 'gpmc' [ 0.251941] omap-gpmc 50000000.gpmc: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 0.251956] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.252035] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x10000000 [ 0.277661] No ATAGs? [ 0.277717] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.277726] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.279769] OMAP DMA hardware revision 0.0 [ 0.351360] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.352057] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-mmcsd[0]' [ 0.355607] SCSI subsystem initialized [ 0.355957] libata version 3.00 loaded. [ 0.356540] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 0.356550] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 0.356587] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 0.356639] no flags found for reset [ 0.356652] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 0.356660] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 0.356670] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 0.356680] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 0.356688] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 0.356751] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 0.356798] hsusb2_phy supply vcc not found, using dummy regulator [ 0.357157] usb_phy_generic hsusb3_phy: GPIO lookup for consumer reset [ 0.357166] usb_phy_generic hsusb3_phy: using device tree for GPIO lookup [ 0.357190] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb3_phy[0]' - status (0) [ 0.357205] no flags found for reset [ 0.357215] usb_phy_generic hsusb3_phy: GPIO lookup for consumer vbus-detect [ 0.357223] usb_phy_generic hsusb3_phy: using device tree for GPIO lookup [ 0.357232] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb3_phy[0]' [ 0.357241] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb3_phy[0]' [ 0.357249] usb_phy_generic hsusb3_phy: using lookup tables for GPIO lookup [ 0.357259] usb_phy_generic hsusb3_phy: lookup for GPIO vbus-detect failed [ 0.357294] hsusb3_phy supply vcc not found, using dummy regulator [ 0.357827] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@2800/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.359035] omap_i2c 48072000.i2c: bus 1 rev0.12 at 100 kHz [ 0.359862] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz [ 0.360575] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 100 kHz [ 0.360649] omap_i2c 4807c000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@2800/pinmux@40/pinmux_i2c5_pins, deferring probe [ 0.363725] Switched to clocksource arch_sys_counter [ 0.474690] NET: Registered protocol family 2 [ 0.476016] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.476221] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.478574] TCP: Hash tables configured (established 8192 bind 8192) [ 0.478728] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.479046] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.479955] NET: Registered protocol family 1 [ 0.480878] RPC: Registered named UNIX socket transport module. [ 0.480888] RPC: Registered udp transport module. [ 0.480896] RPC: Registered tcp transport module. [ 0.480903] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.507901] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 0.507961] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.512146] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.512396] audit: initializing netlink subsys (disabled) [ 0.512517] audit: type=2000 audit(0.500:1): initialized [ 0.515733] VFS: Disk quotas dquot_6.6.0 [ 0.515835] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.517524] NFS: Registering the id_resolver key type [ 0.517754] Key type id_resolver registered [ 0.517763] Key type id_legacy registered [ 0.517882] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.521070] bounce: pool size: 64 pages [ 0.521125] io scheduler noop registered [ 0.521140] io scheduler deadline registered [ 0.521171] io scheduler cfq registered (default) [ 0.526130] pinctrl-single 4a002840.pinmux: 219 pins at pa fc002840 size 438 [ 0.526544] pinctrl-single 4ae0c840.pinmux: 28 pins at pa fce0c840 size 56 [ 0.530729] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.535163] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.535177] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.535510] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 306, base_baud = 3000000) is a OMAP UART0 [ 0.536728] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.536741] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.536937] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 307, base_baud = 3000000) is a OMAP UART1 [ 0.537828] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.537840] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.538027] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 308, base_baud = 3000000) is a OMAP UART2 [ 1.673944] console [ttyO2] enabled [ 1.678470] omap_uart 4806e000.serial: no wakeirq for uart3 [ 1.684323] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 1.694389] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 309, base_baud = 3000000) is a OMAP UART3 [ 1.705091] omap_uart 48066000.serial: no wakeirq for uart4 [ 1.710915] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48066000[0]' [ 1.720925] 48066000.serial: ttyO4 at MMIO 0x48066000 (irq = 310, base_baud = 3000000) is a OMAP UART4 [ 1.731470] omap_uart 48068000.serial: no wakeirq for uart5 [ 1.737310] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48068000[0]' [ 1.747312] 48068000.serial: ttyO5 at MMIO 0x48068000 (irq = 311, base_baud = 3000000) is a OMAP UART5 [ 1.776849] brd: module loaded [ 1.792807] loop: module loaded [ 1.798211] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 1.805251] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.814166] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 1.826383] scsi host0: ahci [ 1.830269] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 338 [ 1.839387] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.854508] mousedev: PS/2 mouse device common for all mice [ 1.860332] i2c /dev entries driver [ 1.866579] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.872853] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.879692] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.889255] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.898715] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.905724] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 1.911818] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 1.918106] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.924938] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.934489] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.943945] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.950946] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 1.957504] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.964689] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 1.970960] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 1.977799] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 1.987361] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 1.996819] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.003843] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.009936] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.016240] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.023062] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.032623] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.042097] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.049113] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.093917] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer cd [ 2.100234] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.107114] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.116687] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.126176] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.133210] omap_hsmmc 480ad000.mmc: lookup for GPIO cd failed [ 2.139361] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.145690] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.152544] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.162128] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.171626] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.178678] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.185085] 480ad000.mmc supply vmmc not found, using dummy regulator [ 2.192250] omap_hsmmc 480ad000.mmc: could not set regulator OCR (-22) [ 2.203647] ata1: SATA link down (SStatus 0 SControl 300) [ 2.233985] ledtrig-cpu: registered to indicate activity on CPUs [ 2.242192] oprofile: using timer interrupt. [ 2.247097] Initializing XFRM netlink socket [ 2.251628] NET: Registered protocol family 17 [ 2.256360] NET: Registered protocol family 15 [ 2.261097] mmc0: MAN_BKOPS_EN bit is not set [ 2.261281] Key type dns_resolver registered [ 2.261433] omap_vc_init_channel: No PMIC info for vdd_core [ 2.261437] omap_vp_init: No PMIC info for vdd_core [ 2.261450] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.261452] omap_vp_init: No PMIC info for vdd_mm [ 2.261466] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.261468] omap_vp_init: No PMIC info for vdd_mpu [ 2.262141] Power Management for TI OMAP4+ devices. [ 2.262384] ThumbEE CPU extension supported. [ 2.262405] Registering SWP/SWPB emulation handler [ 2.262415] SmartReflex Class3 initialized [ 2.277302] palmas 0-0048: Irq flag is 0x00000000 [ 2.328290] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.336715] mmc0: new high speed MMC card at address 0001 [ 2.343948] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.349088] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.355593] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.412311] twl6040 0-004b: clk32k is not handled [ 2.419614] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.434059] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.441864] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.448099] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.454413] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.461260] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.470849] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.480349] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.487397] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.493517] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.499825] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.506684] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.516283] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.525788] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.532818] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.585306] hctosys: unable to open rtc device (rtc0) [ 2.590616] sr_init: No PMIC hook to init smartreflex [ 2.596149] sr_init: platform driver register failed for SR [ 2.631511] ldo8: disabling [ 2.635559] ldo3: disabling [ 2.641595] Waiting for root device /dev/mmcblk1p2... [ 2.655243] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.663796] mmc2: new SD card at address d91a [ 2.669119] mmcblk1: mmc2:d91a SU02G 1.84 GiB [ 2.675857] mmcblk1: p1 p2 [ 2.755352] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.766259] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.796599] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.805184] VFS: Mounted root (ext4 filesystem) readonly on device 179:26. [ 2.816799] devtmpfs: mounted [ 2.820299] Freeing unused kernel memory: 440K (c083a000 - c08a8000) /bin/sh: 0: can't access tty; job control turned off # # #