U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 8(SOH)/3406(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00353b00 = 3488512 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3488448 Bytes = 3.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-143712-gb953c0d (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Jun 22 18:22:37 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c095a780, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @eee96000 s22976 r8192 d22080 u53248 [ 0.000000] pcpu-alloc: s22976 r8192 d22080 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260178 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1002872K/1047552K available (6215K kernel code, 739K rwdata, 2172K rodata, 440K init, 8220K bss, 28296K reserved, 16384K cma-reserved, 252928K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08390b4 (8389 kB) [ 0.000000] .init : 0xc083a000 - 0xc08a8000 ( 440 kB) [ 0.000000] .data : 0xc08a8000 - 0xc0960dc0 ( 740 kB) [ 0.000000] .bss : 0xc0963000 - 0xc116a350 (8221 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002044] Console: colour dummy device 80x30 [ 0.002105] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002136] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002136] ... MAX_LOCK_DEPTH: 48 [ 0.002136] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002136] ... CLASSHASH_SIZE: 4096 [ 0.002166] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002166] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002166] ... CHAINHASH_SIZE: 32768 [ 0.002197] memory used by lock dependency info: 5167 kB [ 0.002197] per task-struct memory footprint: 1152 bytes [ 0.002227] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080322] pid_max: default: 32768 minimum: 301 [ 0.080688] Security Framework initialized [ 0.080841] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080871] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084136] Initializing cgroup subsys blkio [ 0.084167] Initializing cgroup subsys memory [ 0.084259] Initializing cgroup subsys devices [ 0.084350] Initializing cgroup subsys freezer [ 0.084503] Initializing cgroup subsys perf_event [ 0.084564] CPU: Testing write buffer coherency: ok [ 0.085998] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086090] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180267] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181121] Brought up 2 CPUs [ 0.181152] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181152] CPU: All CPU(s) started in SVC mode. [ 0.184631] devtmpfs: initialized [ 0.241271] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.246276] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.251007] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.435821] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.438079] pinctrl core: initialized pinctrl subsystem [ 0.443328] NET: Registered protocol family 16 [ 0.448974] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.480499] cpuidle: using governor ladder [ 0.510314] cpuidle: using governor menu [ 0.523803] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.524658] OMAP GPIO hardware version 0.1 [ 0.526031] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.527954] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.529815] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.531829] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.533721] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.554809] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.555328] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.563354] No ATAGs? [ 0.563415] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.563446] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.566528] OMAP DMA hardware revision 0.0 [ 0.650482] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.651367] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.652313] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.656494] SCSI subsystem initialized [ 0.657043] libata version 3.00 loaded. [ 0.657745] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.658325] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.658416] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.658508] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.663360] Switched to clocksource 32k_counter [ 0.814819] NET: Registered protocol family 2 [ 0.817016] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.817260] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.819824] TCP: Hash tables configured (established 8192 bind 8192) [ 0.820190] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.820526] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.821655] NET: Registered protocol family 1 [ 0.823303] RPC: Registered named UNIX socket transport module. [ 0.823303] RPC: Registered udp transport module. [ 0.823333] RPC: Registered tcp transport module. [ 0.823333] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.827972] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 0.828063] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.833801] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.834136] audit: initializing netlink subsys (disabled) [ 0.834411] audit: type=2000 audit(0.820:1): initialized [ 0.839294] VFS: Disk quotas dquot_6.6.0 [ 0.839447] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.842163] NFS: Registering the id_resolver key type [ 0.842620] Key type id_resolver registered [ 0.842651] Key type id_legacy registered [ 0.842864] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.847930] bounce: pool size: 64 pages [ 0.848052] io scheduler noop registered [ 0.848083] io scheduler deadline registered [ 0.848144] io scheduler cfq registered (default) [ 0.851776] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.852478] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.857757] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.863830] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.863830] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.864410] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.866363] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.866394] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.866638] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.867858] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.867889] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.868164] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.869079] console [ttyO2] enabled [ 1.899475] brd: module loaded [ 1.920440] loop: module loaded [ 1.926605] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.940155] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.950592] spi1.0 supply vdd-io not found, using dummy regulator [ 1.957489] spi1.0 supply vdd not found, using dummy regulator [ 1.963806] ks8851 spi1.0: message enable is 0 [ 1.974822] ks8851 spi1.0 eth0: revision 1, MAC f2:11:a7:75:66:c4, IRQ 202, no EEPROM [ 1.987365] mousedev: PS/2 mouse device common for all mice [ 1.993225] i2c /dev entries driver [ 1.998535] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.004852] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.011688] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.021301] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.030792] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.037963] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.044097] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.050384] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.057220] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.066802] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.076293] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.083312] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.090087] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.097717] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.104034] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.110870] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.120452] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.129943] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.136962] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.143585] omap_hsmmc 480d1000.mmc: unable to get vmmc regulator -517 [ 2.150817] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.157135] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.164031] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.174377] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.179199] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.185516] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.192352] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.201934] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.211395] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.218444] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.264038] ledtrig-cpu: registered to indicate activity on CPUs [ 2.271514] oprofile: using arm/armv7-ca9 [ 2.276580] Initializing XFRM netlink socket [ 2.281188] NET: Registered protocol family 17 [ 2.285980] NET: Registered protocol family 15 [ 2.290985] Key type dns_resolver registered [ 2.295776] twl: not initialized [ 2.299163] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.307556] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.315979] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.324401] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.332824] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.341247] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.349670] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.358123] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.365356] omap2_set_init_voltage: unable to set vdd_mpu [ 2.371063] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.378417] omap2_set_init_voltage: unable to set vdd_core [ 2.384185] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.391387] omap2_set_init_voltage: unable to set vdd_iva [ 2.399200] Power Management for TI OMAP4+ devices. [ 2.404357] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.413146] ThumbEE CPU extension supported. [ 2.417663] Registering SWP/SWPB emulation handler [ 2.422698] SmartReflex Class3 initialized [ 2.433074] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.444732] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.445495] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.458740] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.468841] no flags found for reset [ 2.472595] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.479980] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.487121] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.496978] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.506744] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.514068] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.526977] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.543151] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.550506] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.559295] twl 0-0048: PIH (irq 327) nested IRQs [ 2.582183] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.591125] VUSIM: failed to get the current voltage(-22) [ 2.592590] mmc0: new high speed SDHC card at address b368 [ 2.606262] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.614227] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.627532] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.636749] mmcblk0: p1 p2 [ 2.645355] twl6040 0-004b: clk32k is not handled [ 2.656433] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.671508] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.679687] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.688232] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.694366] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.694366] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.708160] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.717742] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.727233] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.734283] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.734283] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.746704] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.753540] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.763122] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.763153] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.779632] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.823669] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.829956] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.836975] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.846557] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.856048] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.861053] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.863403] mmc1: new high speed SDHC card at address 0007 [ 2.864532] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.866760] mmcblk1: p1 p2 [ 2.884796] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 3.045654] hctosys: unable to open rtc device (rtc0) [ 3.048461] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.059509] sr_init: No PMIC hook to init smartreflex [ 3.063079] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.066650] mmc2: new SDIO card at address 0001 [ 3.075622] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.084381] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.093139] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.145263] VUSB: disabling [ 3.149108] VANA: disabling [ 3.153015] VDAC: disabling [ 3.158843] VAUX1_6030: disabling [ 3.162567] vwl1271: disabling [ 3.172241] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 3.184875] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.220733] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.230407] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 8.063232] EXT4-fs (mmcblk1p2): recovery complete [ 8.092224] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 8.101013] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 8.115264] devtmpfs: mounted [ 8.115264] Freeing unused kernel memory: 440K (c083a000 - c08a8000) [ 8.437988] random: init urandom read with 28 bits of entropy available [ 8.458801] init: Failed to create pty - disabling logging for job [ 8.458801] init: Temporary process spawn error: No space left on device [ 8.522003] init: Failed to create pty - disabling logging for job [ 8.528961] init: Temporary process spawn error: No space left on device [ 8.552886] init: Failed to create pty - disabling logging for job [ 8.559967] init: Temporary process spawn error: No space left on device [ 8.578521] init: Failed to create pty - disabling logging for job [ 8.585418] init: Temporary process spawn error: No space left on device [ 8.716094] init: ureadahead main process (58) terminated with status 5 [ 8.935241] init: Failed to create pty - disabling logging for job [ 8.941772] init: Temporary process spawn error: No space left on device [ 8.985412] init: Failed to create pty - disabling logging for job [ 8.991943] init: Temporary process spawn error: No space left on device [ 9.087860] init: Failed to create pty - disabling logging for job [ 9.094940] init: Temporary process spawn error: No space left on device [ 9.749359] udevd[113]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177376/963584 files, 2987950/7708672 blocks [ 13.322265] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 13.940979] init: udev-fallback-graphics main process (464) terminated with status 1 [ 14.094604] random: nonblocking pool is initialized [ 14.125305] init: plymouth main process (59) killed by SEGV signal [ 14.141082] init: plymouth-splash main process (477) terminated with status 2 [ 14.423614] init: plymouth-log main process (509) terminated with status 1 [ 14.490936] init: failsafe main process (511) killed by TERM signal [ 15.440093] init: plymouth-upstart-bridge main process (562) terminated with status 1 [ 15.511901] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 16.147399] init: bluetooth main process (567) terminated with status 1 [ 16.156402] init: bluetooth main process ended, respawning [ 16.318817] init: alsa-restore main process (604) terminated with status 19 [ 16.333923] init: hybrid-gfx main process (618) terminated with status 1 FATAL: Could not load /lib/modules/4.1.0-143712-gb953c0d/modules.dep: No such file or directory [ 17.123992] init: bluetooth main process (699) terminated with status 1 [ 17.131896] init: bluetooth main process ended, respawning [ 17.393218] init: bluetooth main process (733) terminated with status 1 [ 17.400360] init: bluetooth main process ended, respawning [ 17.588256] init: bluetooth main process (757) terminated with status 1 [ 17.598449] init: bluetooth main process ended, respawning [ 17.785430] init: bluetooth main process (780) terminated with status 1 [ 17.792419] init: bluetooth main process ended, respawning [ 18.117919] init: bluetooth main process (810) terminated with status 1 [ 18.133636] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 18.432250] init: bluetooth main process (834) terminated with status 1 [ 18.439910] init: bluetooth main process ended, respawning [ 19.137329] init: bluetooth main process (860) terminated with status 1 [ 19.163330] init: bluetooth main process ended, respawning