U-Boot SPL 2014.07-rc2-00015-g713ff68 (Jun 03 2014 - 09:09:41) OMAP5432 ES2.0 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img U-Boot 2014.07-rc2-00015-g713ff68 (Jun 03 2014 - 09:09:41), Build: jenkins-github_Bootloader-Builder-315 CPU : OMAP5432 ES2.0 Board: OMAP5432 uEVM I2C: ready DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: No ethernet found. Hit any key to stop autoboot: 5  0 U-Boot# U-Boot# setenv bootargs 'console=ttyO2,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh' U-Boot# loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap5-uevm Sending: Transfer complete CRC mode, 2(SOH)/3402(STX)/0(CAN) packets, 3 retries ## Total Size = 0x003527b8 = 3483576 Bytes U-Boot# bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3483512 Bytes = 3.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-143712-gb953c0d (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Jun 22 18:22:37 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI OMAP5 uEVM board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xfd800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 519936 [ 0.000000] free_area_init_node: node 0, pgdat c095a780, node_mem_map ee61d000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 325376 pages, LIFO batch:31 [ 0.000000] OMAP5432 ES2.0 [ 0.000000] PERCPU: Embedded 13 pages/cpu @ee5b0000 s22976 r8192 d22080 u53248 [ 0.000000] pcpu-alloc: s22976 r8192 d22080 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518226 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk1p2 rootwait fixrtc debug earlyprintk ignore_loglevel init=/bin/sh [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2025960K/2079744K available (6215K kernel code, 739K rwdata, 2172K rodata, 440K init, 8220K bss, 37400K reserved, 16384K cma-reserved, 1285120K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08390b4 (8389 kB) [ 0.000000] .init : 0xc083a000 - 0xc08a8000 ( 440 kB) [ 0.000000] .data : 0xc08a8000 - 0xc0960dc0 ( 740 kB) [ 0.000000] .bss : 0xc0963000 - 0xc116a350 (8221 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000488] Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000488] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16ac02862, max_idle_ns: 440795202218 ns [ 0.000523] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511085ns [ 0.000534] Switching to timer-based delay loop, resolution 162ns [ 0.001614] Console: colour dummy device 80x30 [ 0.001648] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001655] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001662] ... MAX_LOCK_DEPTH: 48 [ 0.001668] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001674] ... CLASSHASH_SIZE: 4096 [ 0.001680] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001686] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001691] ... CHAINHASH_SIZE: 32768 [ 0.001697] memory used by lock dependency info: 5167 kB [ 0.001704] per task-struct memory footprint: 1152 bytes [ 0.001723] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.28 BogoMIPS (lpj=61440) [ 0.001735] pid_max: default: 32768 minimum: 301 [ 0.001999] Security Framework initialized [ 0.002117] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002130] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004338] Initializing cgroup subsys blkio [ 0.004361] Initializing cgroup subsys memory [ 0.004420] Initializing cgroup subsys devices [ 0.004477] Initializing cgroup subsys freezer [ 0.004562] Initializing cgroup subsys perf_event [ 0.004615] CPU: Testing write buffer coherency: ok [ 0.005526] /cpus/cpu@0 missing clock-frequency property [ 0.005546] /cpus/cpu@1 missing clock-frequency property [ 0.005556] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005613] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.010218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.010942] Brought up 2 CPUs [ 0.010955] SMP: Total of 2 processors activated (24.57 BogoMIPS). [ 0.010962] CPU: All CPU(s) started in SVC mode. [ 0.013102] devtmpfs: initialized [ 0.054607] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.055945] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.057206] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.167861] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.168918] pinctrl core: initialized pinctrl subsystem [ 0.172450] NET: Registered protocol family 16 [ 0.175945] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.201188] cpuidle: using governor ladder [ 0.231148] cpuidle: using governor menu [ 0.240680] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.241374] OMAP GPIO hardware version 0.1 [ 0.242284] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.243726] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.245148] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.246542] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.247948] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.249361] gpiochip_add: registered GPIOs 192 to 223 on device: gpio [ 0.250772] gpiochip_add: registered GPIOs 224 to 255 on device: gpio [ 0.251779] platform 50000000.gpmc: Cannot lookup hwmod 'gpmc' [ 0.251983] omap-gpmc 50000000.gpmc: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 0.251998] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.252078] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x10000000 [ 0.277769] No ATAGs? [ 0.277829] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.277838] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.279893] OMAP DMA hardware revision 0.0 [ 0.351139] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.351862] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-mmcsd[0]' [ 0.355437] SCSI subsystem initialized [ 0.355790] libata version 3.00 loaded. [ 0.356374] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 0.356384] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 0.356421] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 0.356473] no flags found for reset [ 0.356486] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 0.356494] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 0.356504] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 0.356514] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 0.356522] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 0.356586] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 0.356634] hsusb2_phy supply vcc not found, using dummy regulator [ 0.356995] usb_phy_generic hsusb3_phy: GPIO lookup for consumer reset [ 0.357004] usb_phy_generic hsusb3_phy: using device tree for GPIO lookup [ 0.357029] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb3_phy[0]' - status (0) [ 0.357044] no flags found for reset [ 0.357055] usb_phy_generic hsusb3_phy: GPIO lookup for consumer vbus-detect [ 0.357063] usb_phy_generic hsusb3_phy: using device tree for GPIO lookup [ 0.357072] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb3_phy[0]' [ 0.357082] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb3_phy[0]' [ 0.357090] usb_phy_generic hsusb3_phy: using lookup tables for GPIO lookup [ 0.357100] usb_phy_generic hsusb3_phy: lookup for GPIO vbus-detect failed [ 0.357137] hsusb3_phy supply vcc not found, using dummy regulator [ 0.357678] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@2800/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.358890] omap_i2c 48072000.i2c: bus 1 rev0.12 at 100 kHz [ 0.359707] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz [ 0.360414] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 100 kHz [ 0.360491] omap_i2c 4807c000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@2800/pinmux@40/pinmux_i2c5_pins, deferring probe [ 0.363576] Switched to clocksource arch_sys_counter [ 0.475474] NET: Registered protocol family 2 [ 0.476789] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.476994] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.479348] TCP: Hash tables configured (established 8192 bind 8192) [ 0.479499] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.479818] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.480751] NET: Registered protocol family 1 [ 0.481659] RPC: Registered named UNIX socket transport module. [ 0.481670] RPC: Registered udp transport module. [ 0.481677] RPC: Registered tcp transport module. [ 0.481685] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.508951] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 0.509011] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.513201] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.513572] audit: initializing netlink subsys (disabled) [ 0.513686] audit: type=2000 audit(0.510:1): initialized [ 0.516757] VFS: Disk quotas dquot_6.6.0 [ 0.516859] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.518622] NFS: Registering the id_resolver key type [ 0.518865] Key type id_resolver registered [ 0.518875] Key type id_legacy registered [ 0.518986] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.522216] bounce: pool size: 64 pages [ 0.522275] io scheduler noop registered [ 0.522290] io scheduler deadline registered [ 0.522321] io scheduler cfq registered (default) [ 0.527315] pinctrl-single 4a002840.pinmux: 219 pins at pa fc002840 size 438 [ 0.527721] pinctrl-single 4ae0c840.pinmux: 28 pins at pa fce0c840 size 56 [ 0.531891] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.536320] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.536335] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.536664] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 306, base_baud = 3000000) is a OMAP UART0 [ 0.537900] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.537913] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.538100] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 307, base_baud = 3000000) is a OMAP UART1 [ 0.538933] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.538945] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.539129] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 308, base_baud = 3000000) is a OMAP UART2 [ 1.674777] console [ttyO2] enabled [ 1.679334] omap_uart 4806e000.serial: no wakeirq for uart3 [ 1.685177] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 1.695232] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 309, base_baud = 3000000) is a OMAP UART3 [ 1.705920] omap_uart 48066000.serial: no wakeirq for uart4 [ 1.711736] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48066000[0]' [ 1.721755] 48066000.serial: ttyO4 at MMIO 0x48066000 (irq = 310, base_baud = 3000000) is a OMAP UART4 [ 1.732308] omap_uart 48068000.serial: no wakeirq for uart5 [ 1.738145] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48068000[0]' [ 1.748165] 48068000.serial: ttyO5 at MMIO 0x48068000 (irq = 311, base_baud = 3000000) is a OMAP UART5 [ 1.777638] brd: module loaded [ 1.793616] loop: module loaded [ 1.798984] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 1.806023] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.814952] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 1.827105] scsi host0: ahci [ 1.830990] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 338 [ 1.840255] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.854961] mousedev: PS/2 mouse device common for all mice [ 1.860789] i2c /dev entries driver [ 1.867054] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.873330] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.880176] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.889731] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.899195] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.906203] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 1.912302] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 1.918587] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.925426] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.934991] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.944451] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.951450] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 1.958019] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.965215] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 1.971492] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 1.978331] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 1.987889] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 1.997358] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.004370] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.010458] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.016754] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.023590] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.033133] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.042605] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.049620] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.093706] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer cd [ 2.100025] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.106906] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.116474] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.125980] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.133018] omap_hsmmc 480ad000.mmc: lookup for GPIO cd failed [ 2.139169] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.145493] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.152349] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.161944] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.171454] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.178510] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.184929] 480ad000.mmc supply vmmc not found, using dummy regulator [ 2.192072] omap_hsmmc 480ad000.mmc: could not set regulator OCR (-22) [ 2.193486] ata1: SATA link down (SStatus 0 SControl 300) [ 2.243835] ledtrig-cpu: registered to indicate activity on CPUs [ 2.252054] oprofile: using timer interrupt. [ 2.256958] Initializing XFRM netlink socket [ 2.261489] NET: Registered protocol family 17 [ 2.266216] NET: Registered protocol family 15 [ 2.270953] mmc0: MAN_BKOPS_EN bit is not set [ 2.271127] Key type dns_resolver registered [ 2.271284] omap_vc_init_channel: No PMIC info for vdd_core [ 2.271288] omap_vp_init: No PMIC info for vdd_core [ 2.271301] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.271304] omap_vp_init: No PMIC info for vdd_mm [ 2.271317] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.271320] omap_vp_init: No PMIC info for vdd_mpu [ 2.271989] Power Management for TI OMAP4+ devices. [ 2.272226] ThumbEE CPU extension supported. [ 2.272250] Registering SWP/SWPB emulation handler [ 2.272259] SmartReflex Class3 initialized [ 2.287181] palmas 0-0048: Irq flag is 0x00000000 [ 2.338254] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.343937] mmc0: new high speed MMC card at address 0001 [ 2.351030] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.356156] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.362697] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.419897] twl6040 0-004b: clk32k is not handled [ 2.427306] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.441642] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.449460] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.455707] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.461996] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.468857] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.478453] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.487954] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.494998] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.501118] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.507433] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.514297] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.523885] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.533371] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.540415] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.585165] hctosys: unable to open rtc device (rtc0) [ 2.590476] sr_init: No PMIC hook to init smartreflex [ 2.596018] sr_init: platform driver register failed for SR [ 2.631421] ldo8: disabling [ 2.635471] ldo3: disabling [ 2.641439] Waiting for root device /dev/mmcblk1p2... [ 2.655084] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.663644] mmc2: new SD card at address d91a [ 2.669024] mmcblk1: mmc2:d91a SU02G 1.84 GiB [ 2.675852] mmcblk1: p1 p2 [ 2.755222] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.766137] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 2.796573] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.805165] VFS: Mounted root (ext4 filesystem) readonly on device 179:26. [ 2.816777] devtmpfs: mounted [ 2.820284] Freeing unused kernel memory: 440K (c083a000 - c08a8000) /bin/sh: 0: can't access tty; job control turned off # # #