Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################ done Bytes transferred = 3491233 (3545a1 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3491169 Bytes = 3.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-143712-gb953c0d (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Jun 22 18:22:37 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c095a780, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @cfc3d000 s22976 r8192 d22080 u53248 [ 0.000000] pcpu-alloc: s22976 r8192 d22080 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 223836K/261120K available (6215K kernel code, 739K rwdata, 2172K rodata, 440K init, 8220K bss, 20900K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08390b4 (8389 kB) [ 0.000000] .init : 0xc083a000 - 0xc08a8000 ( 440 kB) [ 0.000000] .data : 0xc08a8000 - 0xc0960dc0 ( 740 kB) [ 0.000000] .bss : 0xc0963000 - 0xc116a350 (8221 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000034] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000077] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000188] OMAP clocksource: timer1 at 13000000 Hz [ 0.001699] Console: colour dummy device 80x30 [ 0.001796] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001813] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001829] ... MAX_LOCK_DEPTH: 48 [ 0.001843] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001857] ... CLASSHASH_SIZE: 4096 [ 0.001871] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001885] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001898] ... CHAINHASH_SIZE: 32768 [ 0.001912] memory used by lock dependency info: 5167 kB [ 0.001927] per task-struct memory footprint: 1152 bytes [ 0.001969] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.095532] pid_max: default: 32768 minimum: 301 [ 0.096214] Security Framework initialized [ 0.096476] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096507] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101911] Initializing cgroup subsys blkio [ 0.101985] Initializing cgroup subsys memory [ 0.102132] Initializing cgroup subsys devices [ 0.102289] Initializing cgroup subsys freezer [ 0.102514] Initializing cgroup subsys perf_event [ 0.102645] CPU: Testing write buffer coherency: ok [ 0.105121] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.105352] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.113475] Brought up 1 CPUs [ 0.113516] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.113535] CPU: All CPU(s) started in SVC mode. [ 0.120023] devtmpfs: initialized [ 0.246877] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.331790] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.334236] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.420744] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.420783] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.436824] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.440831] pinctrl core: initialized pinctrl subsystem [ 0.449836] NET: Registered protocol family 16 [ 0.460796] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.464702] cpuidle: using governor ladder [ 0.464751] cpuidle: using governor menu [ 0.474969] Reprogramming SDRC clock to 332000000 Hz [ 0.479496] In-band Error seen by USB_OTG at address 0 [ 0.479527] ------------[ cut here ]------------ [ 0.479574] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.479591] Modules linked in: [ 0.479626] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.1.0-143712-gb953c0d #1 [ 0.479642] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.479690] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.479725] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.479755] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.479783] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.479810] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.479847] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.479876] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.479908] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.479936] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.479962] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.479990] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.480025] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.480044] Exception stack(0xce0a3d00 to 0xce0a3d48) [ 0.480070] 3d00: 00000001 ce0a1138 00000000 ce0a0b80 60000153 ce013c60 ce013c60 00000000 [ 0.480094] 3d20: 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d48 c008de10 c05e497c [ 0.480112] 3d40: 20000153 ffffffff [ 0.480143] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.480174] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.480202] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.480230] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.480269] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.480300] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.480328] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.480355] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.480381] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.480407] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.480438] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.480466] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.480491] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.480526] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.480555] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.480583] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.480610] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d4) [ 0.480646] [] (do_one_initcall) from [] (kernel_init_freeable+0x1f4/0x2cc) [ 0.480688] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.480724] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.480894] ---[ end trace 3bb43a68aa9b0179 ]--- [ 0.485979] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.494780] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.496651] OMAP GPIO hardware version 2.5 [ 0.499167] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.502679] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.506219] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.509712] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.513081] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.531423] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.532385] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.546106] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.549950] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.710606] No ATAGs? [ 0.710660] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.715864] OMAP DMA hardware revision 4.0 [ 0.821680] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.823260] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.824821] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.826260] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.827571] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.829033] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.829353] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.830575] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.830840] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.832038] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.839958] SCSI subsystem initialized [ 0.841354] libata version 3.00 loaded. [ 0.842608] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.842766] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.843669] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.847557] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.848013] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.856060] Switched to clocksource timer1 [ 1.129427] NET: Registered protocol family 2 [ 1.132851] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.133115] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.134258] TCP: Hash tables configured (established 2048 bind 2048) [ 1.134639] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.134965] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.136874] NET: Registered protocol family 1 [ 1.140000] RPC: Registered named UNIX socket transport module. [ 1.140038] RPC: Registered udp transport module. [ 1.140057] RPC: Registered tcp transport module. [ 1.140075] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.147509] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 1.147704] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.158183] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.158594] audit: initializing netlink subsys (disabled) [ 1.159019] audit: type=2000 audit(1.150:1): initialized [ 1.167802] VFS: Disk quotas dquot_6.6.0 [ 1.168053] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.172767] NFS: Registering the id_resolver key type [ 1.173506] Key type id_resolver registered [ 1.173535] Key type id_legacy registered [ 1.173865] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.183308] io scheduler noop registered [ 1.183359] io scheduler deadline registered [ 1.183458] io scheduler cfq registered (default) [ 1.188602] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.189472] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.197606] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.209957] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.210010] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.211100] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.214575] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.214622] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.215136] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.218361] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.218407] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.218923] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.621258] console [ttyO2] enabled [ 2.682813] brd: module loaded [ 2.719571] loop: module loaded [ 2.728162] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.737713] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.744379] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.749337] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.757517] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.763805] Creating 5 MTD partitions on "omap2-nand.0": [ 2.769434] 0x000000000000-0x000000080000 : "xloader" [ 2.785084] 0x000000080000-0x000000260000 : "uboot" [ 2.797869] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.809924] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.824210] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.308360] libphy: smsc911x-mdio: probed [ 3.313152] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.326790] smsc911x 2d000000.ethernet eth0: MAC Address: da:99:7f:3f:a4:a7 [ 3.385534] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.392025] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.403104] libphy: davinci_mdio.0: probed [ 3.407621] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.416264] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.430623] mousedev: PS/2 mouse device common for all mice [ 3.436688] i2c /dev entries driver [ 3.446716] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.453035] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.460170] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.470587] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.475507] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.481795] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.488749] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.499124] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.547310] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.553623] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.560614] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.570237] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.579762] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.587193] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.594197] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.602749] ledtrig-cpu: registered to indicate activity on CPUs [ 3.611705] oprofile: using arm/armv7 [ 3.617150] Initializing XFRM netlink socket [ 3.621911] NET: Registered protocol family 17 [ 3.626854] NET: Registered protocol family 15 [ 3.632212] Key type dns_resolver registered [ 3.637182] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.644750] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.650896] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.658243] omap2_set_init_voltage: unable to set vdd_core [ 3.666192] PM: no software I/O chain control; some wakeups may be lost [ 3.673200] pm: Failed to request pm_wkup irq [ 3.677924] ThumbEE CPU extension supported. [ 3.682459] Registering SWP/SWPB emulation handler [ 3.687569] SmartReflex Class3 initialized [ 3.712838] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.725325] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.736920] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.743769] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.751090] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.761217] no flags found for reset [ 3.764981] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.772429] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.779604] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.789489] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.799277] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.806640] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.815745] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.822598] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.829893] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.840004] no flags found for reset [ 3.843769] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.851205] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.858371] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.868267] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.878060] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.885359] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.900767] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.912003] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.919441] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.925875] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.932723] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.942347] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.951876] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.958960] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.979756] mmc0: new high speed SDHC card at address b368 [ 3.989577] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 4.003611] mmcblk0: p1 p2 [ 4.074280] hctosys: unable to open rtc device (rtc0) [ 4.079799] sr_init: No PMIC hook to init smartreflex [ 4.085747] sr_init: platform driver register failed for SR [ 4.176742] ads7846-reg: disabling [ 4.180358] hsusb2_vbus: disabling [ 4.183931] hsusb1_vbus: disabling [ 4.221203] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.234649] devtmpfs: mounted [ 4.239493] Freeing unused kernel memory: 440K (c083a000 - c08a8000) /bin/sh: can't access tty; job control turned off # # #