U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 9(SOH)/3408(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00354358 = 3490648 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3490584 Bytes = 3.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-143712-gb953c0d (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Fri Jun 26 17:06:43 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c095a780, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @eee96000 s22976 r8192 d22080 u53248 [ 0.000000] pcpu-alloc: s22976 r8192 d22080 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260178 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1002872K/1047552K available (6215K kernel code, 739K rwdata, 2172K rodata, 440K init, 8220K bss, 28296K reserved, 16384K cma-reserved, 252928K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08390b4 (8389 kB) [ 0.000000] .init : 0xc083a000 - 0xc08a8000 ( 440 kB) [ 0.000000] .data : 0xc08a8000 - 0xc0960dc0 ( 740 kB) [ 0.000000] .bss : 0xc0963000 - 0xc116a350 (8221 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002105] Console: colour dummy device 80x30 [ 0.002136] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002166] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002166] ... MAX_LOCK_DEPTH: 48 [ 0.002166] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002197] ... CLASSHASH_SIZE: 4096 [ 0.002197] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002197] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002197] ... CHAINHASH_SIZE: 32768 [ 0.002227] memory used by lock dependency info: 5167 kB [ 0.002227] per task-struct memory footprint: 1152 bytes [ 0.002258] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080352] pid_max: default: 32768 minimum: 301 [ 0.080718] Security Framework initialized [ 0.080871] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080902] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084167] Initializing cgroup subsys blkio [ 0.084197] Initializing cgroup subsys memory [ 0.084289] Initializing cgroup subsys devices [ 0.084381] Initializing cgroup subsys freezer [ 0.084533] Initializing cgroup subsys perf_event [ 0.084594] CPU: Testing write buffer coherency: ok [ 0.086029] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086120] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180297] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181152] Brought up 2 CPUs [ 0.181182] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181182] CPU: All CPU(s) started in SVC mode. [ 0.184661] devtmpfs: initialized [ 0.241333] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.246368] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.251098] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.435821] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.438079] pinctrl core: initialized pinctrl subsystem [ 0.443328] NET: Registered protocol family 16 [ 0.448822] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.480529] cpuidle: using governor ladder [ 0.510375] cpuidle: using governor menu [ 0.523864] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.524719] OMAP GPIO hardware version 0.1 [ 0.526062] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.528015] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.529876] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.531890] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.533752] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.554870] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.555419] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.563415] No ATAGs? [ 0.563476] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.563507] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.566589] OMAP DMA hardware revision 0.0 [ 0.650543] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.651428] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.652374] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.656616] SCSI subsystem initialized [ 0.657165] libata version 3.00 loaded. [ 0.657867] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.658447] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.658538] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.658630] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.663238] Switched to clocksource 32k_counter [ 0.814178] NET: Registered protocol family 2 [ 0.816314] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.816558] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.819122] TCP: Hash tables configured (established 8192 bind 8192) [ 0.819427] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.819793] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.820892] NET: Registered protocol family 1 [ 0.822448] RPC: Registered named UNIX socket transport module. [ 0.822479] RPC: Registered udp transport module. [ 0.822479] RPC: Registered tcp transport module. [ 0.822509] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.827239] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 0.827331] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.832672] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.833007] audit: initializing netlink subsys (disabled) [ 0.833587] audit: type=2000 audit(0.820:1): initialized [ 0.838531] VFS: Disk quotas dquot_6.6.0 [ 0.838653] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.841369] NFS: Registering the id_resolver key type [ 0.841888] Key type id_resolver registered [ 0.841888] Key type id_legacy registered [ 0.842102] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.847259] bounce: pool size: 64 pages [ 0.847381] io scheduler noop registered [ 0.847412] io scheduler deadline registered [ 0.847473] io scheduler cfq registered (default) [ 0.851104] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.851837] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.857086] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.863159] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.863189] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.863769] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.865753] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.865783] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.866027] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.867218] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.867248] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.867523] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.868865] console [ttyO2] enabled [ 1.899261] brd: module loaded [ 1.920227] loop: module loaded [ 1.926422] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.940032] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.950439] spi1.0 supply vdd-io not found, using dummy regulator [ 1.957336] spi1.0 supply vdd not found, using dummy regulator [ 1.963623] ks8851 spi1.0: message enable is 0 [ 1.974853] ks8851 spi1.0 eth0: revision 1, MAC ae:72:f4:78:26:ee, IRQ 202, no EEPROM [ 1.987335] mousedev: PS/2 mouse device common for all mice [ 1.993225] i2c /dev entries driver [ 1.998535] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.004852] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.011688] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.021270] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.030792] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.037963] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.044097] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.050384] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.057250] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.066833] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.076324] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.083343] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.090148] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.097778] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.104095] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.110931] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.120513] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.130004] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.137054] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.143676] omap_hsmmc 480d1000.mmc: unable to get vmmc regulator -517 [ 2.150939] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.157257] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.164154] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.174530] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.179351] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.185668] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.192504] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.202087] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.211578] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.218597] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.264068] ledtrig-cpu: registered to indicate activity on CPUs [ 2.271942] oprofile: using arm/armv7-ca9 [ 2.277008] Initializing XFRM netlink socket [ 2.281646] NET: Registered protocol family 17 [ 2.286468] NET: Registered protocol family 15 [ 2.291595] Key type dns_resolver registered [ 2.296417] twl: not initialized [ 2.299804] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.308227] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.316650] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.325073] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.333496] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.341888] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.350280] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.358734] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.365966] omap2_set_init_voltage: unable to set vdd_mpu [ 2.371612] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.378936] omap2_set_init_voltage: unable to set vdd_core [ 2.384735] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.391937] omap2_set_init_voltage: unable to set vdd_iva [ 2.399780] Power Management for TI OMAP4+ devices. [ 2.404907] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.413238] ThumbEE CPU extension supported. [ 2.417938] Registering SWP/SWPB emulation handler [ 2.422973] SmartReflex Class3 initialized [ 2.432647] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.444824] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.445556] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.458801] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.468872] no flags found for reset [ 2.472656] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.480041] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.487182] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.497009] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.506835] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.514129] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.517639] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.519592] mmc0: new high speed SDHC card at address b368 [ 2.530181] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.538391] mmcblk0: p1 p2 [ 2.548645] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.573303] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.581481] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.588653] twl 0-0048: PIH (irq 327) nested IRQs [ 2.609497] VUSIM: failed to get the current voltage(-22) [ 2.618835] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.626953] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.646026] twl6040 0-004b: clk32k is not handled [ 2.657653] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.671905] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.681335] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.689849] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.689849] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.702911] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.702941] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.719360] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.728820] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.735870] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.735870] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.748291] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.755126] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.764709] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.774200] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.774200] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.823303] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.830383] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.837219] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.846801] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.846832] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.863342] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.901153] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.911956] mmc1: new high speed SDHC card at address 0007 [ 2.918853] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.926361] mmcblk1: p1 p2 [ 2.985473] hctosys: unable to open rtc device (rtc0) [ 2.988311] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 2.999267] sr_init: No PMIC hook to init smartreflex [ 3.002563] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.006317] mmc2: new SDIO card at address 0001 [ 3.015136] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.024078] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.032745] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.085418] VUSB: disabling [ 3.089721] VANA: disabling [ 3.093933] VDAC: disabling [ 3.100250] VAUX1_6030: disabling [ 3.104095] vwl1271: disabling [ 3.114440] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 3.126495] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.165802] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.167999] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 6.644287] EXT4-fs (mmcblk1p2): recovery complete [ 6.667236] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.667236] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 6.688812] devtmpfs: mounted [ 6.688812] Freeing unused kernel memory: 440K (c083a000 - c08a8000) [ 7.011077] random: init urandom read with 28 bits of entropy available [ 7.033660] init: Failed to create pty - disabling logging for job [ 7.040191] init: Temporary process spawn error: No space left on device [ 7.094543] init: Failed to create pty - disabling logging for job [ 7.101379] init: Temporary process spawn error: No space left on device [ 7.127258] init: Failed to create pty - disabling logging for job [ 7.134613] init: Temporary process spawn error: No space left on device [ 7.148925] init: Failed to create pty - disabling logging for job [ 7.157348] init: Temporary process spawn error: No space left on device [ 7.285705] init: ureadahead main process (58) terminated with status 5 [ 7.510375] init: Failed to create pty - disabling logging for job [ 7.519104] init: Temporary process spawn error: No space left on device [ 7.561035] init: Failed to create pty - disabling logging for job [ 7.567535] init: Temporary process spawn error: No space left on device [ 7.668792] init: Failed to create pty - disabling logging for job [ 7.675872] init: Temporary process spawn error: No space left on device [ 8.319183] udevd[113]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177377/963584 files, 2988109/7708672 blocks [ 11.748687] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 12.547668] init: udev-fallback-graphics main process (454) terminated with status 1 [ 12.769378] random: nonblocking pool is initialized [ 12.814453] init: plymouth main process (59) killed by SEGV signal [ 12.826293] init: plymouth-splash main process (469) terminated with status 2 [ 13.040557] init: plymouth-log main process (500) terminated with status 1 [ 13.071960] init: failsafe main process (502) killed by TERM signal [ 13.696319] init: plymouth-upstart-bridge main process (534) terminated with status 1 [ 14.054290] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS [ 14.214782] init: bluetooth main process (545) terminated with status 1 [ 14.222106] init: bluetooth main process ended, respawning [ 14.544891] init: bluetooth main process (597) terminated with status 1 [ 14.552032] init: bluetooth main process ended, respawning [ 14.864929] init: bluetooth main process (623) terminated with status 1 [ 14.871917] init: bluetooth main process ended, respawning speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 15.895172] init: alsa-restore main process (672) terminated with status 19 [ 15.976196] init: hybrid-gfx main process (698) terminated with status 1 [ 16.387847] init: bluetooth main process (737) terminated with status 1 [ 16.404754] init: bluetooth main process ended, respawning FATAL: Could not load /lib/modules/4.1.0-143712-gb953c0d/modules.dep: No such file or directory [ 16.794097] init: bluetooth main process (797) terminated with status 1 [ 16.804748] init: bluetooth main process ended, respawning [ 16.991729] init: bluetooth main process (820) terminated with status 1 [ 16.999542] init: bluetooth main process ended, respawning [ 17.183166] init: bluetooth main process (843) terminated with status 1 [ 17.190673] init: bluetooth main process ended, respawning [ 17.645599] init: bluetooth main process (866) terminated with status 1 [ 17.653320] init: bluetooth main process ended, respawning [ 17.941009] init: bluetooth main process (889) terminated with status 1 [ 17.949005] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 18.174987] init: lightdm main process (733) terminated with status 1 [ 18.218414] init: bluetooth main process (914) terminated with status 1 [ 18.230163] init: bluetooth