Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################# done Bytes transferred = 3493369 (354df9 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3493305 Bytes = 3.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-143712-gb953c0d (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Fri Jun 26 17:06:43 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c095a780, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @cfc3d000 s22976 r8192 d22080 u53248 [ 0.000000] pcpu-alloc: s22976 r8192 d22080 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 223836K/261120K available (6215K kernel code, 739K rwdata, 2172K rodata, 440K init, 8220K bss, 20900K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08390b4 (8389 kB) [ 0.000000] .init : 0xc083a000 - 0xc08a8000 ( 440 kB) [ 0.000000] .data : 0xc08a8000 - 0xc0960dc0 ( 740 kB) [ 0.000000] .bss : 0xc0963000 - 0xc116a350 (8221 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000032] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000077] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000189] OMAP clocksource: timer1 at 13000000 Hz [ 0.001704] Console: colour dummy device 80x30 [ 0.001804] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001821] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001836] ... MAX_LOCK_DEPTH: 48 [ 0.001850] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001864] ... CLASSHASH_SIZE: 4096 [ 0.001878] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001892] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001906] ... CHAINHASH_SIZE: 32768 [ 0.001920] memory used by lock dependency info: 5167 kB [ 0.001935] per task-struct memory footprint: 1152 bytes [ 0.001979] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.105680] pid_max: default: 32768 minimum: 301 [ 0.106313] Security Framework initialized [ 0.106578] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106609] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.112001] Initializing cgroup subsys blkio [ 0.112075] Initializing cgroup subsys memory [ 0.112225] Initializing cgroup subsys devices [ 0.112383] Initializing cgroup subsys freezer [ 0.112606] Initializing cgroup subsys perf_event [ 0.112740] CPU: Testing write buffer coherency: ok [ 0.115216] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.115453] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.123625] Brought up 1 CPUs [ 0.123667] SMP: Total of 1 processors activated (597.60 BogoMIPS). [ 0.123686] CPU: All CPU(s) started in SVC mode. [ 0.130124] devtmpfs: initialized [ 0.256913] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.341996] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.344451] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.430860] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.430897] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.447013] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.451099] pinctrl core: initialized pinctrl subsystem [ 0.460114] NET: Registered protocol family 16 [ 0.471062] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.474980] cpuidle: using governor ladder [ 0.475035] cpuidle: using governor menu [ 0.485251] Reprogramming SDRC clock to 332000000 Hz [ 0.489808] In-band Error seen by USB_OTG at address 0 [ 0.489841] ------------[ cut here ]------------ [ 0.489888] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.489906] Modules linked in: [ 0.489940] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.1.0-143712-gb953c0d #1 [ 0.489957] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.490005] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.490040] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.490072] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.490100] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.490127] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.490164] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.490193] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.490226] [] (handle_irq_event) from [] (handle_level_irq+0xb4/0x13c) [ 0.490255] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.490281] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.490310] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xb4/0xc4) [ 0.490346] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.490365] Exception stack(0xce0a3d00 to 0xce0a3d48) [ 0.490391] 3d00: 00000001 ce0a1138 00000000 ce0a0b80 60000153 ce013c60 ce013c60 00000000 [ 0.490414] 3d20: 0000001a 60000153 ce013c38 00000000 00000000 ce0a3d48 c008de10 c05e497c [ 0.490432] 3d40: 20000153 ffffffff [ 0.490462] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.490491] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x384/0x50c) [ 0.490519] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.490547] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.490587] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.490617] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.490646] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.490673] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 0.490699] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 0.490725] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.490756] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.490784] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.490809] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.490844] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.490872] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.490900] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.490927] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d4) [ 0.490960] [] (do_one_initcall) from [] (kernel_init_freeable+0x1f4/0x2cc) [ 0.491001] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.491036] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.491207] ---[ end trace a77d3dd18d4a377f ]--- [ 0.496312] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.505072] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.506939] OMAP GPIO hardware version 2.5 [ 0.509465] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.512993] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.516541] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.520020] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.523382] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.541713] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.542677] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.556386] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.560208] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.720629] No ATAGs? [ 0.720683] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.725907] OMAP DMA hardware revision 4.0 [ 0.831758] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.833341] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.834910] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.836353] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.837663] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.839123] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.839441] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.840662] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.840926] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.842124] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.850055] SCSI subsystem initialized [ 0.851437] libata version 3.00 loaded. [ 0.852708] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.852870] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.853776] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.857643] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.858102] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.866191] Switched to clocksource timer1 [ 1.139561] NET: Registered protocol family 2 [ 1.142974] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.143238] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.144379] TCP: Hash tables configured (established 2048 bind 2048) [ 1.144766] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.145093] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.147007] NET: Registered protocol family 1 [ 1.150157] RPC: Registered named UNIX socket transport module. [ 1.150196] RPC: Registered udp transport module. [ 1.150215] RPC: Registered tcp transport module. [ 1.150234] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.157674] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 1.157875] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.168372] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.168786] audit: initializing netlink subsys (disabled) [ 1.169206] audit: type=2000 audit(1.160:1): initialized [ 1.178018] VFS: Disk quotas dquot_6.6.0 [ 1.178270] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.183001] NFS: Registering the id_resolver key type [ 1.183741] Key type id_resolver registered [ 1.183770] Key type id_legacy registered [ 1.184102] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.193569] io scheduler noop registered [ 1.193627] io scheduler deadline registered [ 1.193726] io scheduler cfq registered (default) [ 1.198898] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.199770] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.207883] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.220222] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.220274] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.221360] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.224831] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.224879] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.225389] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.228563] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.228611] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.229117] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.633465] console [ttyO2] enabled [ 2.695004] brd: module loaded [ 2.731765] loop: module loaded [ 2.740292] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.749831] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.756627] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.761472] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.769642] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.775995] Creating 5 MTD partitions on "omap2-nand.0": [ 2.781573] 0x000000000000-0x000000080000 : "xloader" [ 2.797317] 0x000000080000-0x000000260000 : "uboot" [ 2.809906] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.821931] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.836393] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.322142] libphy: smsc911x-mdio: probed [ 3.327164] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.340710] smsc911x 2d000000.ethernet eth0: MAC Address: d6:c5:cb:59:ef:d4 [ 3.395659] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.402151] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.413246] libphy: davinci_mdio.0: probed [ 3.417756] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.426405] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.440783] mousedev: PS/2 mouse device common for all mice [ 3.446846] i2c /dev entries driver [ 3.456883] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.463200] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.470335] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.480753] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.485669] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.491961] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.498919] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.509289] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.557439] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.563758] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.570741] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.580368] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.589886] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.597322] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.604329] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.612896] ledtrig-cpu: registered to indicate activity on CPUs [ 3.621861] oprofile: using arm/armv7 [ 3.627292] Initializing XFRM netlink socket [ 3.632061] NET: Registered protocol family 17 [ 3.636998] NET: Registered protocol family 15 [ 3.642315] Key type dns_resolver registered [ 3.647283] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.654849] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.660997] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.668345] omap2_set_init_voltage: unable to set vdd_core [ 3.676301] PM: no software I/O chain control; some wakeups may be lost [ 3.683312] pm: Failed to request pm_wkup irq [ 3.688041] ThumbEE CPU extension supported. [ 3.692576] Registering SWP/SWPB emulation handler [ 3.697687] SmartReflex Class3 initialized [ 3.722976] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.735435] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.747056] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.753904] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.761215] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.771353] no flags found for reset [ 3.775119] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.782557] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.789724] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.799615] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.809408] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.816769] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.825871] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.832729] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.840028] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.850133] no flags found for reset [ 3.853895] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.861332] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.868503] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.878387] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.888176] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.895472] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.910890] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.922140] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.929570] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.936002] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.942858] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.952491] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.962015] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.969092] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.989851] mmc0: new high speed SDHC card at address b368 [ 3.999690] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 4.013760] mmcblk0: p1 p2 [ 4.084386] hctosys: unable to open rtc device (rtc0) [ 4.089903] sr_init: No PMIC hook to init smartreflex [ 4.095849] sr_init: platform driver register failed for SR [ 4.186793] ads7846-reg: disabling [ 4.190411] hsusb2_vbus: disabling [ 4.193981] hsusb1_vbus: disabling [ 4.231429] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.244858] devtmpfs: mounted [ 4.249701] Freeing unused kernel memory: 440K (c083a000 - c08a8000) /bin/sh: can't access tty; job control turned off # # #