Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################## done Bytes transferred = 3527685 (35d405 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3527621 Bytes = 3.4 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-rc1-156521-gd770e55 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Jul 5 17:20:49 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c09701c0, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @cfc3d000 s20672 r8192 d24384 u53248 [ 0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 223744K/261120K available (6297K kernel code, 738K rwdata, 2188K rodata, 432K init, 8225K bss, 20992K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0851850 (8487 kB) [ 0.000000] .init : 0xc0852000 - 0xc08be000 ( 432 kB) [ 0.000000] .data : 0xc08be000 - 0xc0976860 ( 739 kB) [ 0.000000] .bss : 0xc0979000 - 0xc11816d0 (8226 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000032] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000074] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000181] OMAP clocksource: timer1 at 13000000 Hz [ 0.001681] Console: colour dummy device 80x30 [ 0.001779] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001797] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001811] ... MAX_LOCK_DEPTH: 48 [ 0.001826] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001839] ... CLASSHASH_SIZE: 4096 [ 0.001854] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001867] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001880] ... CHAINHASH_SIZE: 32768 [ 0.001894] memory used by lock dependency info: 5167 kB [ 0.001908] per task-struct memory footprint: 1536 bytes [ 0.001952] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.095479] pid_max: default: 32768 minimum: 301 [ 0.096167] Security Framework initialized [ 0.096396] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096427] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101798] Initializing cgroup subsys blkio [ 0.101870] Initializing cgroup subsys memory [ 0.102029] Initializing cgroup subsys devices [ 0.102183] Initializing cgroup subsys freezer [ 0.102409] Initializing cgroup subsys perf_event [ 0.102524] CPU: Testing write buffer coherency: ok [ 0.104990] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.105219] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.113465] Brought up 1 CPUs [ 0.113508] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.113528] CPU: All CPU(s) started in SVC mode. [ 0.119808] devtmpfs: initialized [ 0.242551] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.324358] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.326822] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.411405] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.411444] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.427496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.431545] pinctrl core: initialized pinctrl subsystem [ 0.440494] NET: Registered protocol family 16 [ 0.451148] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.455039] cpuidle: using governor ladder [ 0.455094] cpuidle: using governor menu [ 0.456238] Reprogramming SDRC clock to 332000000 Hz [ 0.460682] In-band Error seen by USB_OTG at address 0 [ 0.460715] ------------[ cut here ]------------ [ 0.460761] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.460779] Modules linked in: [ 0.460814] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc1-156521-gd770e55 #1 [ 0.460831] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.460878] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.460908] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.460941] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.460968] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.460996] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.461036] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.461066] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x40/0x64) [ 0.461098] [] (handle_irq_event) from [] (handle_level_irq+0xc0/0x150) [ 0.461128] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.461155] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.461185] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xa8/0xb8) [ 0.461221] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.461240] Exception stack(0xce0a3cf0 to 0xce0a3d38) [ 0.461262] 3ce0: 00000001 ce0a12b8 00000000 ce0a0d00 [ 0.461285] 3d00: 60000153 ce013c64 ce013c64 00000000 0000001a 60000153 ce013c3c 00000000 [ 0.461306] 3d20: 00000000 ce0a3d38 c008f3f0 c05f85ec 20000153 ffffffff [ 0.461337] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.461366] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x390/0x520) [ 0.461396] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.461425] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe4/0x168) [ 0.461467] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.461500] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.461529] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.461556] [] (bus_for_each_drv) from [] (__device_attach+0x8c/0xdc) [ 0.461583] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 0.461610] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.461650] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.461681] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.461710] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.461746] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.461775] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.461816] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.461847] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d8) [ 0.461875] [] (do_one_initcall) from [] (kernel_init_freeable+0x20c/0x2e8) [ 0.461912] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.461946] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.462119] ---[ end trace 7a38a9c8a29b8755 ]--- [ 0.467120] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.475312] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.477199] OMAP GPIO hardware version 2.5 [ 0.479629] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.483083] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.486634] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.490058] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.493452] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.512074] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.513030] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.526527] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.526871] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.530441] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.700558] No ATAGs? [ 0.700615] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.705771] OMAP DMA hardware revision 4.0 [ 0.766578] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.768146] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.769684] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.770930] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.772187] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.773481] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.773815] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.775000] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.775272] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.776694] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.784469] SCSI subsystem initialized [ 0.786041] libata version 3.00 loaded. [ 0.787347] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.787506] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.788459] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.792134] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.792586] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.801005] clocksource: Switched to clocksource timer1 [ 1.084754] NET: Registered protocol family 2 [ 1.088114] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.088226] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.089367] TCP: Hash tables configured (established 2048 bind 2048) [ 1.089775] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.090104] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.092039] NET: Registered protocol family 1 [ 1.095118] RPC: Registered named UNIX socket transport module. [ 1.095159] RPC: Registered udp transport module. [ 1.095179] RPC: Registered tcp transport module. [ 1.095198] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.103387] hw perfevents: Failed to parse /pmu/interrupt-affinity[0] [ 1.103594] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.113816] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.114226] audit: initializing netlink subsys (disabled) [ 1.114661] audit: type=2000 audit(1.110:1): initialized [ 1.123017] VFS: Disk quotas dquot_6.6.0 [ 1.123277] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.128043] NFS: Registering the id_resolver key type [ 1.128783] Key type id_resolver registered [ 1.128813] Key type id_legacy registered [ 1.129136] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.137897] io scheduler noop registered [ 1.137957] io scheduler deadline registered [ 1.138052] io scheduler cfq registered (default) [ 1.143081] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.144065] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.145317] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36 [ 1.153050] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.165217] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.165272] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.166294] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.169787] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.169834] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.170327] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.173560] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.173610] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.174116] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.602094] console [ttyO2] enabled [ 2.664198] brd: module loaded [ 2.699661] loop: module loaded [ 2.708378] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.717606] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.724393] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.729233] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.737406] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.743760] Creating 5 MTD partitions on "omap2-nand.0": [ 2.749333] 0x000000000000-0x000000080000 : "xloader" [ 2.765007] 0x000000080000-0x000000260000 : "uboot" [ 2.777276] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.789320] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.804091] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.287250] libphy: smsc911x-mdio: probed [ 3.292277] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.305812] smsc911x 2d000000.ethernet eth0: MAC Address: 52:10:d7:14:4a:85 [ 3.360611] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.367105] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.378110] libphy: davinci_mdio.0: probed [ 3.382623] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.391264] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.405725] mousedev: PS/2 mouse device common for all mice [ 3.411798] i2c /dev entries driver [ 3.421708] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.428025] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.435162] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.445580] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.450436] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.456840] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.463795] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.474165] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.522377] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.528696] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.535682] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.545312] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.554839] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.562247] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.569514] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.579821] ledtrig-cpu: registered to indicate activity on CPUs [ 3.588736] oprofile: using arm/armv7 [ 3.594006] Initializing XFRM netlink socket [ 3.598761] NET: Registered protocol family 17 [ 3.603703] NET: Registered protocol family 15 [ 3.609024] Key type dns_resolver registered [ 3.614100] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.621769] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.627836] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.635183] omap2_set_init_voltage: unable to set vdd_core [ 3.642909] PM: no software I/O chain control; some wakeups may be lost [ 3.649909] pm: Failed to request pm_wkup irq [ 3.654690] ThumbEE CPU extension supported. [ 3.659227] Registering SWP/SWPB emulation handler [ 3.664338] SmartReflex Class3 initialized [ 3.689215] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.701947] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.713285] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.720135] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.727469] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.737595] no flags found for reset [ 3.741425] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.748807] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.755982] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.765886] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.775686] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.783046] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.792117] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.798973] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.806329] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.816446] no flags found for reset [ 3.820209] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.827656] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.834832] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.844730] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.854527] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.861882] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.877406] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.888658] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.896100] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.902542] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.909394] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.919025] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.928541] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.935626] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.956788] mmc0: new high speed SDHC card at address b368 [ 3.966563] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 3.980924] mmcblk0: p1 p2 [ 4.049974] hctosys: unable to open rtc device (rtc0) [ 4.055492] sr_init: No PMIC hook to init smartreflex [ 4.061374] sr_init: platform driver register failed for SR [ 4.151898] ads7846-reg: disabling [ 4.155514] hsusb2_vbus: disabling [ 4.159086] hsusb1_vbus: disabling [ 4.196603] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.209969] devtmpfs: mounted [ 4.214825] Freeing unused kernel memory: 432K (c0852000 - c08be000) /bin/sh: can't access tty; job control turned off # # #