U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete m - CRC mode, 6(SOH)/3442(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0035c9a8 = 3525032 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3524968 Bytes = 3.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-rc2-156781-gbc0195a (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Jul 14 13:05:50 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c09701c0, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @eee96000 s20672 r8192 d24384 u53248 [ 0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260178 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1002780K/1047552K available (6297K kernel code, 738K rwdata, 2188K rodata, 432K init, 8225K bss, 28388K reserved, 16384K cma-reserved, 252928K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08518a0 (8487 kB) [ 0.000000] .init : 0xc0852000 - 0xc08be000 ( 432 kB) [ 0.000000] .data : 0xc08be000 - 0xc0976860 ( 739 kB) [ 0.000000] .bss : 0xc0979000 - 0xc11816d0 (8226 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002136] Console: colour dummy device 80x30 [ 0.002166] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002197] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002197] ... MAX_LOCK_DEPTH: 48 [ 0.002197] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002227] ... CLASSHASH_SIZE: 4096 [ 0.002227] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002227] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002227] ... CHAINHASH_SIZE: 32768 [ 0.002258] memory used by lock dependency info: 5167 kB [ 0.002258] per task-struct memory footprint: 1536 bytes [ 0.002288] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080322] pid_max: default: 32768 minimum: 301 [ 0.080688] Security Framework initialized [ 0.080841] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080871] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084045] Initializing cgroup subsys blkio [ 0.084075] Initializing cgroup subsys memory [ 0.084197] Initializing cgroup subsys devices [ 0.084289] Initializing cgroup subsys freezer [ 0.084411] Initializing cgroup subsys perf_event [ 0.084472] CPU: Testing write buffer coherency: ok [ 0.085876] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.085968] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180267] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181213] Brought up 2 CPUs [ 0.181243] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181243] CPU: All CPU(s) started in SVC mode. [ 0.184661] devtmpfs: initialized [ 0.240722] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.245635] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.250122] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.430023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.432617] pinctrl core: initialized pinctrl subsystem [ 0.437713] NET: Registered protocol family 16 [ 0.443145] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.470489] cpuidle: using governor ladder [ 0.500335] cpuidle: using governor menu [ 0.513336] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.514160] OMAP GPIO hardware version 0.1 [ 0.515411] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.517333] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.519195] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.521118] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.522949] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.543945] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.544464] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.552490] No ATAGs? [ 0.552581] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.552581] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.555664] OMAP DMA hardware revision 0.0 [ 0.615753] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.616638] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.617492] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.622009] SCSI subsystem initialized [ 0.622528] libata version 3.00 loaded. [ 0.623229] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.623779] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.623870] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.623962] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.628662] clocksource: Switched to clocksource 32k_counter [ 0.780212] NET: Registered protocol family 2 [ 0.782318] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.782501] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.785034] TCP: Hash tables configured (established 8192 bind 8192) [ 0.785339] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.785705] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.786804] NET: Registered protocol family 1 [ 0.788360] RPC: Registered named UNIX socket transport module. [ 0.788391] RPC: Registered udp transport module. [ 0.788391] RPC: Registered tcp transport module. [ 0.788421] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.793579] hw perfevents: Failed to parse /pmu/interrupt-affinity[0] [ 0.793670] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.799316] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.799621] audit: initializing netlink subsys (disabled) [ 0.799865] audit: type=2000 audit(0.780:1): initialized [ 0.804229] VFS: Disk quotas dquot_6.6.0 [ 0.804351] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.807037] NFS: Registering the id_resolver key type [ 0.807495] Key type id_resolver registered [ 0.807495] Key type id_legacy registered [ 0.807708] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.812469] bounce: pool size: 64 pages [ 0.812591] io scheduler noop registered [ 0.812622] io scheduler deadline registered [ 0.812652] io scheduler cfq registered (default) [ 0.816314] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.817016] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.822326] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.828430] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.828460] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.829071] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.831054] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.831054] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.831329] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.832489] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.832519] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.832763] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.836120] console [ttyO2] enabled [ 1.866912] brd: module loaded [ 1.887115] loop: module loaded [ 1.893524] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.907165] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.917602] spi1.0 supply vdd-io not found, using dummy regulator [ 1.924438] spi1.0 supply vdd not found, using dummy regulator [ 1.930786] ks8851 spi1.0: message enable is 0 [ 1.941986] ks8851 spi1.0 eth0: revision 1, MAC ee:31:82:bb:b1:64, IRQ 202, no EEPROM [ 1.954406] mousedev: PS/2 mouse device common for all mice [ 1.960296] i2c /dev entries driver [ 1.965545] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.971862] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.978729] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.988281] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.997772] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.004913] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.011077] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.017364] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.024200] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.033813] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.043273] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.050323] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.057250] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.090515] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.096801] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.103668] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.113250] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.122741] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.129760] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.136505] omap_hsmmc 480d1000.mmc: unable to get vmmc regulator -517 [ 2.169067] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.175354] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.182281] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.192626] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.197479] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.203796] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.210632] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.220214] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.229705] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.236724] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.279541] ledtrig-cpu: registered to indicate activity on CPUs [ 2.287384] oprofile: using arm/armv7-ca9 [ 2.292388] Initializing XFRM netlink socket [ 2.297027] NET: Registered protocol family 17 [ 2.301818] NET: Registered protocol family 15 [ 2.306945] Key type dns_resolver registered [ 2.311798] twl: not initialized [ 2.315216] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.323608] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.332061] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.340454] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.348907] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.357269] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.365692] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.374114] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.381347] omap2_set_init_voltage: unable to set vdd_mpu [ 2.387023] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.394317] omap2_set_init_voltage: unable to set vdd_core [ 2.400115] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.407318] omap2_set_init_voltage: unable to set vdd_iva [ 2.415130] Power Management for TI OMAP4+ devices. [ 2.420288] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.428558] ThumbEE CPU extension supported. [ 2.428558] Registering SWP/SWPB emulation handler [ 2.433319] SmartReflex Class3 initialized [ 2.448577] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.460052] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.466888] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.473999] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.484100] no flags found for reset [ 2.487854] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.495239] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.502380] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.512237] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.522003] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.529327] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.537048] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.544555] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.556091] mmc0: new high speed SDHC card at address b368 [ 2.563201] twl 0-0048: PIH (irq 327) nested IRQs [ 2.568908] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.578124] mmcblk0: p1 p2 [ 2.591369] VUSIM: failed to get the current voltage(-22) [ 2.600738] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.608673] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.631195] twl6040 0-004b: clk32k is not handled [ 2.639312] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.654418] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.662872] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.671447] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.678192] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.684509] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.684539] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.700927] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.710418] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.710418] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.723541] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.723571] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.736694] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.736724] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.755737] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.755767] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.809356] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.815643] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.822509] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.822540] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.841583] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.846679] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.849060] mmc1: new high speed SDHC card at address 0007 [ 2.850128] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.852325] mmcblk1: p1 p2 [ 2.870330] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 3.010467] hctosys: unable to open rtc device (rtc0) [ 3.013275] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.024261] sr_init: No PMIC hook to init smartreflex [ 3.028015] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.031768] mmc2: new SDIO card at address 0001 [ 3.040161] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.049133] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.057739] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.110656] VUSB: disabling [ 3.114593] VANA: disabling [ 3.118438] VDAC: disabling [ 3.124298] VAUX1_6030: disabling [ 3.127990] vwl1271: disabling [ 3.137878] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 3.150360] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.188018] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.195709] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 3.698425] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 3.710968] hw-breakpoint: CPU 0 failed to disable vector catch [ 7.128570] EXT4-fs (mmcblk1p2): recovery complete [ 7.149902] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.158721] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.171997] devtmpfs: mounted [ 7.171997] Freeing unused kernel memory: 432K (c0852000 - c08be000) [ 7.484191] random: init urandom read with 28 bits of entropy available [ 7.503997] init: Failed to create pty - disabling logging for job [ 7.512878] init: Temporary process spawn error: No space left on device [ 7.567291] init: Failed to create pty - disabling logging for job [ 7.574157] init: Temporary process spawn error: No space left on device [ 7.601501] init: Failed to create pty - disabling logging for job [ 7.608581] init: Temporary process spawn error: No space left on device [ 7.619384] init: Failed to create pty - disabling logging for job [ 7.623321] init: Temporary process spawn error: No space left on device [ 7.770599] init: ureadahead main process (54) terminated with status 5 [ 7.966461] init: Failed to create pty - disabling logging for job [ 7.975097] init: Temporary process spawn error: No space left on device [ 8.015441] init: Failed to create pty - disabling logging for job [ 8.023712] init: Temporary process spawn error: No space left on device [ 8.116668] init: Failed to create pty - disabling logging for job [ 8.125030] init: Temporary process spawn error: No space left on device [ 8.618804] udevd[111]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177381/963584 files, 2988331/7708672 blocks [ 11.892974] init: udev-fallback-graphics main process (375) terminated with status 1 [ 11.976287] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 12.152893] init: plymouth-splash main process (398) terminated with status 2 [ 12.175689] init: plymouth main process (56) killed by SEGV signal mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.596221] random: nonblocking pool is initialized [ 12.711700] init: plymouth-log main process (459) terminated with status 1 [ 12.757659] init: failsafe main process (461) killed by TERM signal speech-dispatcher disabled; edit /etc/default/speech-dispatcher [ 13.675384] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth saned disabled; edit /etc/default/saned [ 13.920135] init: alsa-restore main process (513) terminated with status 19 [ 14.368560] init: plymouth-upstart-bridge main process (574) terminated with status 1 FATAL: Could not load /lib/modules/4.2.0-rc2-156781-gbc0195a/modules.dep: No such file or directory [ 14.487609] init: hybrid-gfx main process (583) terminated with status 1 [ 15.241394] init: bluetooth main process (606) terminated with status 1 [ 15.251098] init: bluetooth main process ended, respawning [ 15.826446] init: bluetooth main process (655) terminated with status 1 [ 15.833953] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: