U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 9(SOH)/3442(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0035cb55 = 3525461 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3525397 Bytes = 3.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-rc3-157208-g52721d9 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Jul 28 08:20:29 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c0970240, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @eee96000 s20672 r8192 d24384 u53248 [ 0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260178 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1002776K/1047552K available (6297K kernel code, 738K rwdata, 2188K rodata, 432K init, 8225K bss, 28392K reserved, 16384K cma-reserved, 252928K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0851884 (8487 kB) [ 0.000000] .init : 0xc0852000 - 0xc08be000 ( 432 kB) [ 0.000000] .data : 0xc08be000 - 0xc09768e0 ( 739 kB) [ 0.000000] .bss : 0xc0979000 - 0xc11816d0 (8226 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002166] Console: colour dummy device 80x30 [ 0.002197] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002227] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002227] ... MAX_LOCK_DEPTH: 48 [ 0.002227] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002258] ... CLASSHASH_SIZE: 4096 [ 0.002258] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002258] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002258] ... CHAINHASH_SIZE: 32768 [ 0.002288] memory used by lock dependency info: 5167 kB [ 0.002288] per task-struct memory footprint: 1536 bytes [ 0.002319] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080352] pid_max: default: 32768 minimum: 301 [ 0.080749] Security Framework initialized [ 0.080871] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080902] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084075] Initializing cgroup subsys blkio [ 0.084167] Initializing cgroup subsys memory [ 0.084259] Initializing cgroup subsys devices [ 0.084350] Initializing cgroup subsys freezer [ 0.084503] Initializing cgroup subsys perf_event [ 0.084564] CPU: Testing write buffer coherency: ok [ 0.085968] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086059] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180297] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181182] Brought up 2 CPUs [ 0.181213] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181213] CPU: All CPU(s) started in SVC mode. [ 0.184631] devtmpfs: initialized [ 0.241210] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.246246] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.250946] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.434936] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.437499] pinctrl core: initialized pinctrl subsystem [ 0.442718] NET: Registered protocol family 16 [ 0.448089] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.470520] cpuidle: using governor ladder [ 0.500366] cpuidle: using governor menu [ 0.513610] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.514465] OMAP GPIO hardware version 0.1 [ 0.515716] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.517669] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.519500] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.521423] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.523284] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.544586] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.545104] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.553253] No ATAGs? [ 0.553344] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.553375] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.556427] OMAP DMA hardware revision 0.0 [ 0.615966] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.616821] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.617675] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.622192] SCSI subsystem initialized [ 0.622711] libata version 3.00 loaded. [ 0.623443] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.623992] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.624084] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.624176] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.628906] clocksource: Switched to clocksource 32k_counter [ 0.781341] NET: Registered protocol family 2 [ 0.783447] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.783630] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.786193] TCP: Hash tables configured (established 8192 bind 8192) [ 0.786499] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.786865] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.788024] NET: Registered protocol family 1 [ 0.789794] RPC: Registered named UNIX socket transport module. [ 0.789794] RPC: Registered udp transport module. [ 0.789825] RPC: Registered tcp transport module. [ 0.789825] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.794860] hw perfevents: Failed to parse /pmu/interrupt-affinity[0] [ 0.794952] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.800476] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.800811] audit: initializing netlink subsys (disabled) [ 0.801055] audit: type=2000 audit(0.780:1): initialized [ 0.804870] VFS: Disk quotas dquot_6.6.0 [ 0.805023] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.808135] NFS: Registering the id_resolver key type [ 0.808563] Key type id_resolver registered [ 0.808563] Key type id_legacy registered [ 0.808929] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.813201] bounce: pool size: 64 pages [ 0.813323] io scheduler noop registered [ 0.813354] io scheduler deadline registered [ 0.813415] io scheduler cfq registered (default) [ 0.817047] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.817749] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.823272] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.829467] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.829498] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.830017] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.832031] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.832031] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.832305] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.833496] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.833526] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.833801] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.836364] console [ttyO2] enabled [ 1.867462] brd: module loaded [ 1.887725] loop: module loaded [ 1.894104] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.907592] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.918029] spi1.0 supply vdd-io not found, using dummy regulator [ 1.924896] spi1.0 supply vdd not found, using dummy regulator [ 1.931243] ks8851 spi1.0: message enable is 0 [ 1.942077] ks8851 spi1.0 eth0: revision 1, MAC ce:cb:a6:44:be:fc, IRQ 202, no EEPROM [ 1.954711] mousedev: PS/2 mouse device common for all mice [ 1.960601] i2c /dev entries driver [ 1.965881] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.972198] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.979064] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.988616] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.998107] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.005279] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.011413] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.017700] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.024566] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.034149] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.043670] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.050689] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.057617] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.090728] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.097015] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.103912] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.113494] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.122985] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.130004] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.136749] omap_hsmmc 480d1000.mmc: unable to get vmmc regulator -517 [ 2.169281] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.175598] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.182495] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.192871] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.197723] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.204010] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.210876] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.220458] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.229949] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.236968] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.279846] ledtrig-cpu: registered to indicate activity on CPUs [ 2.287353] oprofile: using arm/armv7-ca9 [ 2.292694] Initializing XFRM netlink socket [ 2.297363] NET: Registered protocol family 17 [ 2.302185] NET: Registered protocol family 15 [ 2.307220] Key type dns_resolver registered [ 2.312011] twl: not initialized [ 2.315429] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.323883] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.332336] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.340759] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.349212] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.357574] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.365997] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.374450] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.381652] omap2_set_init_voltage: unable to set vdd_mpu [ 2.387359] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.394653] omap2_set_init_voltage: unable to set vdd_core [ 2.400451] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.407653] omap2_set_init_voltage: unable to set vdd_iva [ 2.415527] Power Management for TI OMAP4+ devices. [ 2.420654] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.428771] ThumbEE CPU extension supported. [ 2.428771] Registering SWP/SWPB emulation handler [ 2.438751] SmartReflex Class3 initialized [ 2.449371] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.460601] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.461334] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.474670] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.484741] no flags found for reset [ 2.488525] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.495941] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.503051] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.512908] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.522674] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.528839] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.545532] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.547454] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.549591] mmc0: new high speed SDHC card at address b368 [ 2.554748] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.558441] mmcblk0: p1 p2 [ 2.590423] twl 0-0048: PIH (irq 327) nested IRQs [ 2.599548] hw-breakpoint: Failed to enable monitor mode on CPU 1. [ 2.606414] hw-breakpoint: CPU 1 failed to disable vector catch [ 2.624389] VUSIM: failed to get the current voltage(-22) [ 2.633758] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.641693] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.664337] twl6040 0-004b: clk32k is not handled [ 2.672363] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.688446] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.697021] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.704742] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.712280] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.712280] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.725402] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.734985] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.735015] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.751525] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.757629] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.763946] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.770782] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.780364] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.789855] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.796874] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.839416] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.839416] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.853179] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.862762] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.862792] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.879272] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.916900] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.927673] mmc1: new high speed SDHC card at address 0007 [ 2.934570] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.942138] mmcblk1: p1 p2 [ 3.001068] hctosys: unable to open rtc device (rtc0) [ 3.003875] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.014923] sr_init: No PMIC hook to init smartreflex [ 3.018249] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.021972] mmc2: new SDIO card at address 0001 [ 3.024597] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.039794] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.048492] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.101104] VUSB: disabling [ 3.104919] VANA: disabling [ 3.108795] VDAC: disabling [ 3.114868] VAUX1_6030: disabling [ 3.118530] vwl1271: disabling [ 3.128295] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 3.141510] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.182189] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.192169] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 6.198760] EXT4-fs (mmcblk1p2): recovery complete [ 6.221038] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.229736] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 6.242950] devtmpfs: mounted [ 6.242950] Freeing unused kernel memory: 432K (c0852000 - c08be000) [ 6.555725] random: init urandom read with 28 bits of entropy available [ 6.574157] init: Failed to create pty - disabling logging for job [ 6.584533] init: Temporary process spawn error: No space left on device [ 6.637817] init: Failed to create pty - disabling logging for job [ 6.644622] init: Temporary process spawn error: No space left on device [ 6.669708] init: Failed to create pty - disabling logging for job [ 6.676239] init: Temporary process spawn error: No space left on device [ 6.688507] init: Failed to create pty - disabling logging for job [ 6.695037] init: Temporary process spawn error: No space left on device [ 6.831329] init: ureadahead main process (55) terminated with status 5 [ 7.033508] init: Failed to create pty - disabling logging for job [ 7.040557] init: Temporary process spawn error: No space left on device [ 7.079589] init: Failed to create pty - disabling logging for job [ 7.087768] init: Temporary process spawn error: No space left on device [ 7.180999] init: Failed to create pty - disabling logging for job [ 7.189636] init: Temporary process spawn error: No space left on device [ 7.705352] udevd[110]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177388/963584 files, 2988872/7708672 blocks [ 10.875396] init: udev-fallback-graphics main process (370) terminated with status 1 [ 10.949584] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.130889] init: plymouth-splash main process (385) terminated with status 2 [ 11.152069] init: plymouth main process (56) killed by SEGV signal mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 11.445251] random: nonblocking pool is initialized [ 11.716522] init: plymouth-log main process (455) terminated with status 1 [ 11.762176] init: failsafe main process (457) killed by TERM signal [ 12.464599] init: plymouth-upstart-bridge main process (495) terminated with status 1 [ 12.651397] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 12.893432] init: bluetooth main process (506) terminated with status 1 [ 12.900787] init: bluetooth main process ended, respawning speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 13.638183] init: alsa-restore main process (565) terminated with status 19 [ 13.673248] init: hybrid-gfx main process (585) terminated with status 1 [ 14.157958] init: bluetooth main process (618) terminated with status 1 [ 14.167480] init: bluetooth main process ended, respawning FATAL: Could not load /lib/modules/4.2.0-rc3-157208-g52721d9/modules.dep: No such file or directory [ 14.786590] init: bluetooth main process (700) terminated with status 1 [ 14.793701] init: bluetooth main process ended, respawning [ 14.972991] init: bluetooth main process (723) terminated with status 1 [ 14.980621] init: bluetooth main process ended, respawning [ 15.182220] init: bluetooth main process (746) terminated with status 1 [ 15.190093] init: bluetooth main process ended, respawning [ 15.507110] init: bluetooth main process (770) terminated with status 1 [ 15.515167] init: bluetooth main process ended, respawning [ 15.723358] init: lightdm main process (613) terminated with status 1 Ubuntu 12.04.1 LTS variscite-desktop ttyO2 [ 15.794097] init: bluetooth main process (798) terminated with status 1 [ 15.804077] init: bluetooth main process ended, respawning variscite-desktop login: [ 15.988891] init: bluetooth main process (823) terminated with status 1 [ 15.996032] init: bluetooth main process ended, respawning [ 16.174865] init: bluetooth main process (846) terminated with status 1 [ 16.182525] init: bluetooth main process ended, respawning