U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  2  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 8(SOH)/3442(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0035caed = 3525357 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3525293 Bytes = 3.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-rc4-157550-gcbfe8fa (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Thu Jul 30 10:14:53 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c0970240, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @eee96000 s20672 r8192 d24384 u53248 [ 0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260178 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1002780K/1047552K available (6297K kernel code, 738K rwdata, 2188K rodata, 432K init, 8225K bss, 28388K reserved, 16384K cma-reserved, 252928K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0851868 (8487 kB) [ 0.000000] .init : 0xc0852000 - 0xc08be000 ( 432 kB) [ 0.000000] .data : 0xc08be000 - 0xc09768e0 ( 739 kB) [ 0.000000] .bss : 0xc0979000 - 0xc11816d0 (8226 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002166] Console: colour dummy device 80x30 [ 0.002227] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002227] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002227] ... MAX_LOCK_DEPTH: 48 [ 0.002258] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002258] ... CLASSHASH_SIZE: 4096 [ 0.002258] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002258] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002288] ... CHAINHASH_SIZE: 32768 [ 0.002288] memory used by lock dependency info: 5167 kB [ 0.002288] per task-struct memory footprint: 1536 bytes [ 0.002319] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080352] pid_max: default: 32768 minimum: 301 [ 0.080749] Security Framework initialized [ 0.080871] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080902] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084075] Initializing cgroup subsys blkio [ 0.084167] Initializing cgroup subsys memory [ 0.084259] Initializing cgroup subsys devices [ 0.084350] Initializing cgroup subsys freezer [ 0.084472] Initializing cgroup subsys perf_event [ 0.084533] CPU: Testing write buffer coherency: ok [ 0.085937] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086059] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180297] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181182] Brought up 2 CPUs [ 0.181213] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181213] CPU: All CPU(s) started in SVC mode. [ 0.184600] devtmpfs: initialized [ 0.240966] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.246002] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.250701] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.434295] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.436859] pinctrl core: initialized pinctrl subsystem [ 0.442016] NET: Registered protocol family 16 [ 0.447357] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.470520] cpuidle: using governor ladder [ 0.500366] cpuidle: using governor menu [ 0.513366] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.514221] OMAP GPIO hardware version 0.1 [ 0.515441] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.517364] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.519195] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.521118] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.522949] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.543853] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.544372] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.552398] No ATAGs? [ 0.552490] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.552520] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.555572] OMAP DMA hardware revision 0.0 [ 0.615783] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.616607] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.617462] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.621765] SCSI subsystem initialized [ 0.622283] libata version 3.00 loaded. [ 0.623016] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.623535] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.623626] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.623718] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.628448] clocksource: Switched to clocksource 32k_counter [ 0.778656] NET: Registered protocol family 2 [ 0.780761] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.780944] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.783477] TCP: Hash tables configured (established 8192 bind 8192) [ 0.783813] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.784149] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.785278] NET: Registered protocol family 1 [ 0.786834] RPC: Registered named UNIX socket transport module. [ 0.786834] RPC: Registered udp transport module. [ 0.786834] RPC: Registered tcp transport module. [ 0.786865] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.792022] hw perfevents: Failed to parse /pmu/interrupt-affinity[0] [ 0.792114] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.797393] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.797729] audit: initializing netlink subsys (disabled) [ 0.797973] audit: type=2000 audit(0.770:1): initialized [ 0.802734] VFS: Disk quotas dquot_6.6.0 [ 0.802856] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.805572] NFS: Registering the id_resolver key type [ 0.805999] Key type id_resolver registered [ 0.806030] Key type id_legacy registered [ 0.806243] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.810974] bounce: pool size: 64 pages [ 0.811096] io scheduler noop registered [ 0.811126] io scheduler deadline registered [ 0.811157] io scheduler cfq registered (default) [ 0.814758] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.815429] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.820892] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.826873] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.826904] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.827453] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.829559] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.829559] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.829833] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.831024] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.831024] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.831298] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.834320] console [ttyO2] enabled [ 1.865081] brd: module loaded [ 1.885253] loop: module loaded [ 1.891540] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.905120] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.915527] spi1.0 supply vdd-io not found, using dummy regulator [ 1.922424] spi1.0 supply vdd not found, using dummy regulator [ 1.928710] ks8851 spi1.0: message enable is 0 [ 1.939697] ks8851 spi1.0 eth0: revision 1, MAC 7e:45:61:1a:c1:ec, IRQ 202, no EEPROM [ 1.952087] mousedev: PS/2 mouse device common for all mice [ 1.957946] i2c /dev entries driver [ 1.963226] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.969543] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.976379] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.985961] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.995452] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.002624] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.008758] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.015014] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.021881] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.031463] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.040954] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.047973] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.054901] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.090240] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.096527] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.103424] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.113006] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.122467] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.129516] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.136230] omap_hsmmc 480d1000.mmc: unable to get vmmc regulator -517 [ 2.168792] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.175079] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.182006] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.192352] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.197204] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.203521] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.210357] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.219940] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.229431] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.236419] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.279327] ledtrig-cpu: registered to indicate activity on CPUs [ 2.286804] oprofile: using arm/armv7-ca9 [ 2.292114] Initializing XFRM netlink socket [ 2.296783] NET: Registered protocol family 17 [ 2.301574] NET: Registered protocol family 15 [ 2.306640] Key type dns_resolver registered [ 2.311492] twl: not initialized [ 2.314910] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.323333] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.331787] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.340209] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.348663] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.357025] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.365447] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.373870] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.381103] omap2_set_init_voltage: unable to set vdd_mpu [ 2.386779] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.394073] omap2_set_init_voltage: unable to set vdd_core [ 2.399871] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.407073] omap2_set_init_voltage: unable to set vdd_iva [ 2.414855] Power Management for TI OMAP4+ devices. [ 2.420013] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.428283] ThumbEE CPU extension supported. [ 2.428283] Registering SWP/SWPB emulation handler [ 2.438049] SmartReflex Class3 initialized [ 2.448791] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.459991] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.460083] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.474029] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.484130] no flags found for reset [ 2.484161] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.495300] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.502441] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.512298] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.522064] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.529357] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.543609] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.546844] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.548889] mmc0: new high speed SDHC card at address b368 [ 2.553924] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.564849] mmcblk0: p1 p2 [ 2.588470] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.596710] twl 0-0048: PIH (irq 327) nested IRQs [ 2.610809] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.624908] VUSIM: failed to get the current voltage(-22) [ 2.630615] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.642211] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.661712] twl6040 0-004b: clk32k is not handled [ 2.673065] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.687896] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.696166] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.704467] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.704467] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.717651] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.724517] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.734100] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.743591] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.750610] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.756744] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.763031] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.769897] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.779479] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.779510] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.795959] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.838653] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.838653] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.852447] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.862030] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.871520] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.878540] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.918884] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.929809] mmc1: new high speed SDHC card at address 0007 [ 2.936614] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.944305] mmcblk1: p1 p2 [ 3.000701] hctosys: unable to open rtc device (rtc0) [ 3.003479] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.014526] sr_init: No PMIC hook to init smartreflex [ 3.018188] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.021820] mmc2: new SDIO card at address 0001 [ 3.030731] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.039459] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.048095] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.100433] VUSB: disabling [ 3.104309] VANA: disabling [ 3.108123] VDAC: disabling [ 3.115631] VAUX1_6030: disabling [ 3.119415] vwl1271: disabling [ 3.129638] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 3.142883] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.181762] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.191680] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 7.920074] EXT4-fs (mmcblk1p2): recovery complete [ 7.943420] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.943420] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.965759] devtmpfs: mounted [ 7.965759] Freeing unused kernel memory: 432K (c0852000 - c08be000) [ 8.282012] random: init urandom read with 27 bits of entropy available [ 8.304229] init: Failed to create pty - disabling logging for job [ 8.310882] init: Temporary process spawn error: No space left on device [ 8.364349] init: Failed to create pty - disabling logging for job [ 8.371032] init: Temporary process spawn error: No space left on device [ 8.395446] init: Failed to create pty - disabling logging for job [ 8.402496] init: Temporary process spawn error: No space left on device [ 8.414703] init: Failed to create pty - disabling logging for job [ 8.421478] init: Temporary process spawn error: No space left on device [ 8.560577] init: ureadahead main process (55) terminated with status 5 [ 8.761352] init: Failed to create pty - disabling logging for job [ 8.769989] init: Temporary process spawn error: No space left on device [ 8.810760] init: Failed to create pty - disabling logging for job [ 8.817291] init: Temporary process spawn error: No space left on device [ 8.909088] init: Failed to create pty - disabling logging for job [ 8.916931] init: Temporary process spawn error: No space left on device [ 9.404815] udevd[110]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177390/963584 files, 2989005/7708672 blocks [ 12.693603] init: udev-fallback-graphics main process (378) terminated with status 1 [ 12.695312] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 12.947875] init: plymouth main process (56) killed by SEGV signal [ 12.960510] init: plymouth-splash main process (396) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 13.293609] random: nonblocking pool is initialized [ 13.492156] init: plymouth-log main process (456) terminated with status 1 [ 13.544128] init: failsafe main process (458) killed by TERM signal [ 14.286468] init: plymouth-upstart-bridge main process (501) terminated with status 1 [ 14.471313] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 15.111602] init: bluetooth main process (509) terminated with status 1 [ 15.132110] init: bluetooth main process ended, respawning [ 15.224395] init: alsa-restore main process (555) terminated with status 19 [ 15.244812] init: hybrid-gfx main process (571) terminated with status 1 FATAL: Could not load /lib/modules/4.2.0-rc4-157550-gcbfe8fa/modules.dep: No such file or directory [ 15.995178] init: bluetooth main process (657) terminated with status 1 [ 16.002655] init: bluetooth main process ended, respawning [ 16.175872] init: bluetooth main process (682) terminated with status 1 [ 16.182983] init: bluetooth main process ended, respawning [ 16.361389] init: bluetooth main process (706) terminated with status 1 [ 16.369018] init: bluetooth main process ended, respawning [ 16.665191] init: bluetooth main process (731) terminated with status 1 [ 16.672393] init: bluetooth main process ended, respawning [ 17.003204] init: bluetooth main process (758) terminated with status 1 [ 17.011810] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 17.457122] init: bluetooth main process (799) terminated with status 1 [ 17.464996] init: bluetooth main process ended, respawning [ 17.542388] init: lightdm main process (612) terminated with status 1 [ 17.685699] init: bluetooth main process (824) terminated with status 1 [ 17.695251] init: bluetooth main process ended, respawning [ 17.870880] init: bluetooth main process (847) terminated with status 1 [ 17.878875] init: bluetooth main process ended, respawning [ 18.078552] init: bluetooth main process (870) terminated with status 1 [ 18.085906] init: bluetooth main process ended, respawning