U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 7(SOH)/3442(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0035ca4d = 3525197 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3525133 Bytes = 3.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-rc5-157887-g74d3329 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Aug 9 20:09:02 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat c0970240, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67328 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @eee96000 s20672 r8192 d24384 u53248 [ 0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260178 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1002776K/1047552K available (6297K kernel code, 738K rwdata, 2188K rodata, 432K init, 8225K bss, 28392K reserved, 16384K cma-reserved, 252928K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0851848 (8487 kB) [ 0.000000] .init : 0xc0852000 - 0xc08be000 ( 432 kB) [ 0.000000] .data : 0xc08be000 - 0xc09768e0 ( 739 kB) [ 0.000000] .bss : 0xc0979000 - 0xc11816d0 (8226 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002044] Console: colour dummy device 80x30 [ 0.002105] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002105] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002136] ... MAX_LOCK_DEPTH: 48 [ 0.002136] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002136] ... CLASSHASH_SIZE: 4096 [ 0.002136] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002166] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002166] ... CHAINHASH_SIZE: 32768 [ 0.002166] memory used by lock dependency info: 5167 kB [ 0.002197] per task-struct memory footprint: 1536 bytes [ 0.002197] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080322] pid_max: default: 32768 minimum: 301 [ 0.080718] Security Framework initialized [ 0.080841] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080871] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084075] Initializing cgroup subsys blkio [ 0.084167] Initializing cgroup subsys memory [ 0.084259] Initializing cgroup subsys devices [ 0.084350] Initializing cgroup subsys freezer [ 0.084472] Initializing cgroup subsys perf_event [ 0.084533] CPU: Testing write buffer coherency: ok [ 0.085968] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086059] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180267] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181152] Brought up 2 CPUs [ 0.181182] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181182] CPU: All CPU(s) started in SVC mode. [ 0.184600] devtmpfs: initialized [ 0.240814] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.245758] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.250366] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.431182] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.433776] pinctrl core: initialized pinctrl subsystem [ 0.438873] NET: Registered protocol family 16 [ 0.444305] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.470489] cpuidle: using governor ladder [ 0.500335] cpuidle: using governor menu [ 0.513366] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.514221] OMAP GPIO hardware version 0.1 [ 0.515472] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.517395] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.519256] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.521179] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.523040] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.544067] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.544555] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.552551] No ATAGs? [ 0.552642] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.552673] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.555725] OMAP DMA hardware revision 0.0 [ 0.615692] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.616516] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.617370] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.621643] SCSI subsystem initialized [ 0.622192] libata version 3.00 loaded. [ 0.622894] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.623413] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.623504] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.623596] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.628265] clocksource: Switched to clocksource 32k_counter [ 0.779968] NET: Registered protocol family 2 [ 0.782135] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.782348] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.784881] TCP: Hash tables configured (established 8192 bind 8192) [ 0.785186] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.785552] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.786712] NET: Registered protocol family 1 [ 0.788391] RPC: Registered named UNIX socket transport module. [ 0.788421] RPC: Registered udp transport module. [ 0.788421] RPC: Registered tcp transport module. [ 0.788452] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.793487] hw perfevents: Failed to parse /pmu/interrupt-affinity[0] [ 0.793579] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.799255] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.799591] audit: initializing netlink subsys (disabled) [ 0.799804] audit: type=2000 audit(0.780:1): initialized [ 0.804199] VFS: Disk quotas dquot_6.6.0 [ 0.804351] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.807067] NFS: Registering the id_resolver key type [ 0.807525] Key type id_resolver registered [ 0.807525] Key type id_legacy registered [ 0.807739] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.812530] bounce: pool size: 64 pages [ 0.812652] io scheduler noop registered [ 0.812683] io scheduler deadline registered [ 0.812744] io scheduler cfq registered (default) [ 0.816375] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.817047] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.822326] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.828399] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.828430] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.828979] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.830932] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.830963] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.831207] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.832366] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.832366] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.832641] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.835968] console [ttyO2] enabled [ 1.866638] brd: module loaded [ 1.886840] loop: module loaded [ 1.893188] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.906799] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.917236] spi1.0 supply vdd-io not found, using dummy regulator [ 1.924041] spi1.0 supply vdd not found, using dummy regulator [ 1.930389] ks8851 spi1.0: message enable is 0 [ 1.941375] ks8851 spi1.0 eth0: revision 1, MAC f2:b2:d2:dc:9a:9e, IRQ 202, no EEPROM [ 1.953704] mousedev: PS/2 mouse device common for all mice [ 1.959594] i2c /dev entries driver [ 1.964813] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.971160] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.977996] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.987579] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.997070] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.004211] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.010375] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.016662] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.023498] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.033111] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.042602] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.049621] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.056549] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.090118] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.096405] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.103302] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.112884] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.122375] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.129394] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.136138] omap_hsmmc 480d1000.mmc: unable to get vmmc regulator -517 [ 2.168670] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.174957] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.181884] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.192260] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.197082] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.203399] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.210266] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.219848] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.229309] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.236328] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.279144] ledtrig-cpu: registered to indicate activity on CPUs [ 2.286956] oprofile: using arm/armv7-ca9 [ 2.291992] Initializing XFRM netlink socket [ 2.296630] NET: Registered protocol family 17 [ 2.301422] NET: Registered protocol family 15 [ 2.306518] Key type dns_resolver registered [ 2.311370] twl: not initialized [ 2.314788] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.323181] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.331604] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.340026] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.348449] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.356842] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.365234] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.373687] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.380920] omap2_set_init_voltage: unable to set vdd_mpu [ 2.386596] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.393890] omap2_set_init_voltage: unable to set vdd_core [ 2.399688] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.406890] omap2_set_init_voltage: unable to set vdd_iva [ 2.414703] Power Management for TI OMAP4+ devices. [ 2.419860] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.428405] ThumbEE CPU extension supported. [ 2.428405] Registering SWP/SWPB emulation handler [ 2.437927] SmartReflex Class3 initialized [ 2.448150] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.459564] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.460327] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.473541] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.483642] no flags found for reset [ 2.483642] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.494781] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.501922] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.511779] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.521514] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.528808] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.543365] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.543365] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.562469] mmc0: new high speed SDHC card at address b368 [ 2.570831] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.578582] twl 0-0048: PIH (irq 327) nested IRQs [ 2.587341] mmcblk0: p1 p2 [ 2.604522] VUSIM: failed to get the current voltage(-22) [ 2.613861] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.621795] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.644134] twl6040 0-004b: clk32k is not handled [ 2.652282] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.666473] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.676544] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.684143] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.690246] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.690246] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.704101] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.713684] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.723175] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.730224] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.736328] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.742645] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.749511] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.759094] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.768585] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.775604] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.828796] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.835235] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.842102] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.851684] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.861175] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.866241] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.868560] mmc1: new high speed SDHC card at address 0007 [ 2.869720] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.872741] mmcblk1: p1 p2 [ 2.889953] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 3.020935] hctosys: unable to open rtc device (rtc0) [ 3.023803] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.034820] sr_init: No PMIC hook to init smartreflex [ 3.038513] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.042358] mmc2: new SDIO card at address 0001 [ 3.050994] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.059570] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.068267] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.121582] VUSB: disabling [ 3.125427] VANA: disabling [ 3.129302] VDAC: disabling [ 3.135223] VAUX1_6030: disabling [ 3.138977] vwl1271: disabling [ 3.148651] EXT3-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (240) [ 3.161102] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.198608] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.206298] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 3.218933] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 3.240356] hw-breakpoint: CPU 0 failed to disable vector catch [ 7.138122] EXT4-fs (mmcblk1p2): recovery complete [ 7.154663] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.163452] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.177612] devtmpfs: mounted [ 7.181213] Freeing unused kernel memory: 432K (c0852000 - c08be000) [ 7.490783] random: init urandom read with 28 bits of entropy available [ 7.513977] init: Failed to create pty - disabling logging for job [ 7.520507] init: Temporary process spawn error: No space left on device [ 7.574645] init: Failed to create pty - disabling logging for job [ 7.581298] init: Temporary process spawn error: No space left on device [ 7.610015] init: Failed to create pty - disabling logging for job [ 7.617095] init: Temporary process spawn error: No space left on device [ 7.628234] init: Failed to create pty - disabling logging for job [ 7.636444] init: Temporary process spawn error: No space left on device [ 7.790374] init: ureadahead main process (55) terminated with status 5 [ 7.989624] init: Failed to create pty - disabling logging for job [ 7.989624] init: Temporary process spawn error: No space left on device [ 8.035736] init: Failed to create pty - disabling logging for job [ 8.044281] init: Temporary process spawn error: No space left on device [ 8.136322] init: Failed to create pty - disabling logging for job [ 8.144683] init: Temporary process spawn error: No space left on device [ 8.635528] udevd[110]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177392/963584 files, 2989143/7708672 blocks [ 11.881927] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.958099] init: udev-fallback-graphics main process (385) terminated with status 1 [ 12.165527] init: plymouth-splash main process (395) terminated with status 2 [ 12.186920] init: plymouth main process (56) killed by SEGV signal mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.543640] random: nonblocking pool is initialized [ 12.665252] init: plymouth-log main process (458) terminated with status 1 [ 12.696350] init: failsafe main process (460) killed by TERM signal [ 13.531982] init: plymouth-upstart-bridge main process (509) terminated with status 1 [ 13.690582] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 14.322540] init: alsa-restore main process (543) terminated with status 19 [ 14.373565] init: hybrid-gfx main process (561) terminated with status 1 FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory [ 14.709625] init: bluetooth main process (516) terminated with status 1 [ 14.717315] init: bluetooth main process ended, respawning [ 15.286895] init: bluetooth main process (652) terminated with status 1 [ 15.294982] init: bluetooth main process ended, respawning [ 15.633697] init: bluetooth main process (686) terminated with status 1 [ 15.640655] init: bluetooth main process ended, respawning [ 15.870635] init: bluetooth main process (712) terminated with status 1 [ 15.880157] init: bluetooth main process ended, respawning [ 16.059722] init: bluetooth main process (735) terminated with status 1 [ 16.067138] init: bluetooth main process ended, respawning [ 16.244049] init: bluetooth main process (759) terminated with status 1 [ 16.251953] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 16.817321] init: bluetooth main process (796) terminated with status 1 [ 16.825744] init: bluetooth main process ended, respawning [ 17.011444] init: bluetooth main process (824) terminated with status 1 [ 17.019989] init: bluetooth main process ended, respawning [ 17.081329] init: lightdm main process (605) terminated with status 1