Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################## done Bytes transferred = 3528053 (35d575 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3527989 Bytes = 3.4 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-rc5-157887-g74d3329 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Aug 9 20:09:02 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c0970240, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @cfc3d000 s20672 r8192 d24384 u53248 [ 0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 223744K/261120K available (6297K kernel code, 738K rwdata, 2188K rodata, 432K init, 8225K bss, 20992K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0851848 (8487 kB) [ 0.000000] .init : 0xc0852000 - 0xc08be000 ( 432 kB) [ 0.000000] .data : 0xc08be000 - 0xc09768e0 ( 739 kB) [ 0.000000] .bss : 0xc0979000 - 0xc11816d0 (8226 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000034] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000076] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000185] OMAP clocksource: timer1 at 13000000 Hz [ 0.001670] Console: colour dummy device 80x30 [ 0.001761] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001780] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001795] ... MAX_LOCK_DEPTH: 48 [ 0.001811] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001826] ... CLASSHASH_SIZE: 4096 [ 0.001840] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001854] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001868] ... CHAINHASH_SIZE: 32768 [ 0.001883] memory used by lock dependency info: 5167 kB [ 0.001898] per task-struct memory footprint: 1536 bytes [ 0.001941] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.095502] pid_max: default: 32768 minimum: 301 [ 0.096178] Security Framework initialized [ 0.096407] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096438] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101789] Initializing cgroup subsys blkio [ 0.101945] Initializing cgroup subsys memory [ 0.102108] Initializing cgroup subsys devices [ 0.102260] Initializing cgroup subsys freezer [ 0.102481] Initializing cgroup subsys perf_event [ 0.102594] CPU: Testing write buffer coherency: ok [ 0.105064] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.105273] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.113453] Brought up 1 CPUs [ 0.113493] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.113513] CPU: All CPU(s) started in SVC mode. [ 0.119827] devtmpfs: initialized [ 0.242615] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.324079] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.326524] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.410879] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.410916] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.426963] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.431001] pinctrl core: initialized pinctrl subsystem [ 0.439874] NET: Registered protocol family 16 [ 0.450506] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.454325] cpuidle: using governor ladder [ 0.454382] cpuidle: using governor menu [ 0.455309] Reprogramming SDRC clock to 332000000 Hz [ 0.459896] In-band Error seen by USB_OTG at address 0 [ 0.459927] ------------[ cut here ]------------ [ 0.459978] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.459996] Modules linked in: [ 0.460032] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc5-157887-g74d3329 #1 [ 0.460049] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.460098] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.460131] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.460163] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.460191] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.460219] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.460260] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.460291] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x40/0x64) [ 0.460323] [] (handle_irq_event) from [] (handle_level_irq+0xc0/0x150) [ 0.460353] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.460380] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.460410] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xa8/0xb8) [ 0.460446] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.460465] Exception stack(0xce0a3cf0 to 0xce0a3d38) [ 0.460488] 3ce0: 00000001 ce0a1228 00000000 ce0a0d00 [ 0.460512] 3d00: 60000153 ce013c64 ce013c64 00000000 0000001a 60000153 ce013c3c 00000000 [ 0.460533] 3d20: 00000000 ce0a3d38 c008f228 c05f8774 20000153 ffffffff [ 0.460562] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.460592] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x390/0x520) [ 0.460621] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.460651] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe0/0x164) [ 0.460694] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.460726] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.460756] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.460784] [] (bus_for_each_drv) from [] (__device_attach+0x8c/0xdc) [ 0.460811] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 0.460838] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.460879] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.460910] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.460940] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.460979] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.461008] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.461038] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.461067] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d8) [ 0.461107] [] (do_one_initcall) from [] (kernel_init_freeable+0x204/0x2e0) [ 0.461145] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.461181] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.461351] ---[ end trace 85992ebe80fb370e ]--- [ 0.466290] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.474443] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.476326] OMAP GPIO hardware version 2.5 [ 0.478722] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.482179] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.485517] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.489143] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.492529] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.511044] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.511991] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.525128] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.525478] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.529189] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.690565] No ATAGs? [ 0.690619] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.695770] OMAP DMA hardware revision 4.0 [ 0.756056] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.757597] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.759116] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.760349] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.761619] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.762917] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.763244] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.764423] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.764695] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.766089] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.773779] SCSI subsystem initialized [ 0.775153] libata version 3.00 loaded. [ 0.776626] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.776788] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.777736] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.781370] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.781812] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.790142] clocksource: Switched to clocksource timer1 [ 1.073150] NET: Registered protocol family 2 [ 1.076488] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.076599] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.077742] TCP: Hash tables configured (established 2048 bind 2048) [ 1.078153] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.078482] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.080384] NET: Registered protocol family 1 [ 1.083455] RPC: Registered named UNIX socket transport module. [ 1.083496] RPC: Registered udp transport module. [ 1.083516] RPC: Registered tcp transport module. [ 1.083535] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.091640] hw perfevents: Failed to parse /pmu/interrupt-affinity[0] [ 1.091846] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.101985] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.102394] audit: initializing netlink subsys (disabled) [ 1.102819] audit: type=2000 audit(1.100:1): initialized [ 1.110796] VFS: Disk quotas dquot_6.6.0 [ 1.111049] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.115879] NFS: Registering the id_resolver key type [ 1.116594] Key type id_resolver registered [ 1.116624] Key type id_legacy registered [ 1.116947] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.125702] io scheduler noop registered [ 1.125761] io scheduler deadline registered [ 1.125858] io scheduler cfq registered (default) [ 1.130873] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.131847] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.133074] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36 [ 1.140676] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.152594] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.152645] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.153382] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.157011] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.157058] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.157736] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.160597] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.160642] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.161137] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.588644] console [ttyO2] enabled [ 2.650929] brd: module loaded [ 2.686075] loop: module loaded [ 2.694745] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.703953] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.710739] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.715582] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.723757] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.730111] Creating 5 MTD partitions on "omap2-nand.0": [ 2.735684] 0x000000000000-0x000000080000 : "xloader" [ 2.751243] 0x000000080000-0x000000260000 : "uboot" [ 2.763516] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.775492] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.790207] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.271683] libphy: smsc911x-mdio: probed [ 3.276499] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.290145] smsc911x 2d000000.ethernet eth0: MAC Address: 42:d0:aa:0f:e8:1a [ 3.339746] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.346242] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.357252] libphy: davinci_mdio.0: probed [ 3.361769] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.370418] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.384792] mousedev: PS/2 mouse device common for all mice [ 3.390863] i2c /dev entries driver [ 3.400739] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.407057] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.414196] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.424605] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.429459] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.435812] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.442759] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.453129] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.501517] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.507835] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.514829] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.524459] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.533986] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.541396] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.548656] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.558938] ledtrig-cpu: registered to indicate activity on CPUs [ 3.567811] oprofile: using arm/armv7 [ 3.573103] Initializing XFRM netlink socket [ 3.577852] NET: Registered protocol family 17 [ 3.582798] NET: Registered protocol family 15 [ 3.588110] Key type dns_resolver registered [ 3.593175] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.600838] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.606896] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.614246] omap2_set_init_voltage: unable to set vdd_core [ 3.621947] PM: no software I/O chain control; some wakeups may be lost [ 3.628955] pm: Failed to request pm_wkup irq [ 3.633735] ThumbEE CPU extension supported. [ 3.638269] Registering SWP/SWPB emulation handler [ 3.643383] SmartReflex Class3 initialized [ 3.668412] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.681125] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.692457] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.699307] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.706632] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.716762] no flags found for reset [ 3.720592] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.727969] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.735138] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.745032] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.754832] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.762198] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.771259] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.778112] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.785458] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.795576] no flags found for reset [ 3.799345] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.806791] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.813968] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.823862] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.833652] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.841008] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.856490] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.867698] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.875123] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.881561] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.888417] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.898045] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.907570] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.914650] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.935573] mmc0: new high speed SDHC card at address b368 [ 3.945380] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 3.959453] mmcblk0: p1 p2 [ 4.028268] hctosys: unable to open rtc device (rtc0) [ 4.033796] sr_init: No PMIC hook to init smartreflex [ 4.040263] sr_init: platform driver register failed for SR [ 4.130468] ads7846-reg: disabling [ 4.134084] hsusb2_vbus: disabling [ 4.137657] hsusb1_vbus: disabling [ 4.174712] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.188024] devtmpfs: mounted [ 4.192858] Freeing unused kernel memory: 432K (c0852000 - c08be000) /bin/sh: can't access tty; job control turned off # # #