怘€æ€˜€`3f<€fÀæøÀ̆ž?`??f?æžf<øž`??ð3ž<3ž<`<f<?˜à?˜æ?˜à0˜˜fÃðÀ€˜0†xð˜à؞Øàó̘àó˜xÌ𘘘03`Ì3ž<~<àžf<ðffü3f<<`<†žøž~<æžþž`?˜øfÃæàóæž?怘€à˜þž<`<†žøž~<˜æfÏàæžþž`?ø†<†žøž†øæžæž˜žfÏæàfü

U-Boot 2011.06-00001-ge147603 (Sep 07 2012 - 22:19:41)

OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Beagle xM Rev A
No EEPROM on expansion board
Die ID #2fa800001bf00000015739ea0702a01d
Hit any key to stop autoboot:  3  0 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # loady 0x81000000
## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
CSending: uImage-dtb.omap3-beagle-xm
Sending: 

Transfer complete
 - CRC mode, 2(SOH)/3449(STX)/0(CAN) packets, 3 retries
## Total Size      = 0x0035e3f8 = 3531768 Bytes
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # setenv bootargs console=ttyO2,230400 vram=12M root=/dev/mmcblk0p2 rw mmcrootfstype=ext3 rootwait earlyprintk ignore_loglevel
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # bootm 0x81000000
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   Linux-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3531704 Bytes = 3.4 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-rc5-157887-g74d3329 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Aug 9 20:09:02 MDT 2015
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI OMAP3 BeagleBoard xM
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] cma: Reserved 16 MiB at 0x9e800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 130816
[    0.000000] free_area_init_node: node 0, pgdat c0970240, node_mem_map dfa71000
[    0.000000]   Normal zone: 1152 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130816 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] PERCPU: Embedded 13 pages/cpu @df9f6000 s20672 r8192 d24384 u53248
[    0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129664
[    0.000000] Kernel command line: console=ttyO2,230400 vram=12M root=/dev/mmcblk0p2 rw mmcrootfstype=ext3 rootwait earlyprintk ignore_loglevel
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 483360K/523264K available (6297K kernel code, 738K rwdata, 2188K rodata, 432K init, 8225K bss, 23520K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0851848   (8487 kB)
[    0.000000]       .init : 0xc0852000 - 0xc08be000   ( 432 kB)
[    0.000000]       .data : 0xc08be000 - 0xc09768e0   ( 739 kB)
[    0.000000]        .bss : 0xc0979000 - 0xc11816d0   (8226 kB)
[    0.000000] Running RCU self tests
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU lockdep checking is enabled.
[    0.000000] 	Additional per-CPU info printed with stalls.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/331/600 MHz
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
[    0.000030] OMAP clocksource: 32k_counter at 32768 Hz
[    0.001281] Console: colour dummy device 80x30
[    0.001373] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001373] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001403] ... MAX_LOCK_DEPTH:          48
[    0.001403] ... MAX_LOCKDEP_KEYS:        8191
[    0.001403] ... CLASSHASH_SIZE:          4096
[    0.001434] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001434] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001464] ... CHAINHASH_SIZE:          32768
[    0.001464]  memory used by lock dependency info: 5167 kB
[    0.001495]  per task-struct memory footprint: 1536 bytes
[    0.001525] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696)
[    0.107269] pid_max: default: 32768 minimum: 301
[    0.107818] Security Framework initialized
[    0.108032] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.108062] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.112579] Initializing cgroup subsys blkio
[    0.112701] Initializing cgroup subsys memory
[    0.112854] Initializing cgroup subsys devices
[    0.112976] Initializing cgroup subsys freezer
[    0.113159] Initializing cgroup subsys perf_event
[    0.113250] CPU: Testing write buffer coherency: ok
[    0.115325] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.115447] Setting up static identity map for 0x80008280 - 0x800082f0
[    0.122589] Brought up 1 CPUs
[    0.122619] SMP: Total of 1 processors activated (594.73 BogoMIPS).
[    0.122650] CPU: All CPU(s) started in SVC mode.
[    0.127838] devtmpfs: initialized
[    0.243865] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.331420] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.333892] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.445587] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.449157] pinctrl core: initialized pinctrl subsystem
[    0.456939] NET: Registered protocol family 16
[    0.466308] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.469696] cpuidle: using governor ladder
[    0.469726] cpuidle: using governor menu
[    0.470550] Reprogramming SDRC clock to 331882352 Hz
[    0.484497] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_gpio1_pins, deferring probe
[    0.487274] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.488800] OMAP GPIO hardware version 2.5
[    0.490814] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.493865] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.496978] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.499999] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[    0.503387] irq: no irq domain found for /ocp/l4@48000000/scm@2000/pinmux@30 !
[    0.531372] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.531677] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    0.534667] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
[    0.547302] No ATAGs?
[    0.547363] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.551879] OMAP DMA hardware revision 5.0
[    0.606628] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.608093] of_get_named_gpiod_flags: parsed 'gpio' property of node '/hsusb2_power_reg[0]' - status (-517)
[    0.613983] SCSI subsystem initialized
[    0.615112] libata version 3.00 loaded.
[    0.616485] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset
[    0.616516] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup
[    0.616638] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0)
[    0.616790] no flags found for reset
[    0.616821] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect
[    0.616851] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup
[    0.616851] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]'
[    0.616882] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]'
[    0.616912] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup
[    0.617095] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed
[    0.621887] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
[    0.624023] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
[    0.625885] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz
[    0.633087] clocksource: Switched to clocksource 32k_counter
[    0.875335] NET: Registered protocol family 2
[    0.878143] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.878265] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[    0.880523] TCP: Hash tables configured (established 4096 bind 4096)
[    0.880859] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    0.881164] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    0.882690] NET: Registered protocol family 1
[    0.885467] RPC: Registered named UNIX socket transport module.
[    0.885498] RPC: Registered udp transport module.
[    0.885528] RPC: Registered tcp transport module.
[    0.885528] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.892028] hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
[    0.892181] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.901184] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.901550] audit: initializing netlink subsys (disabled)
[    0.901855] audit: type=2000 audit(0.880:1): initialized
[    0.908630] VFS: Disk quotas dquot_6.6.0
[    0.908843] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.912780] NFS: Registering the id_resolver key type
[    0.913665] Key type id_resolver registered
[    0.913665] Key type id_legacy registered
[    0.913970] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.921234] io scheduler noop registered
[    0.921295] io scheduler deadline registered
[    0.921356] io scheduler cfq registered (default)
[    0.925842] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    0.926666] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    0.928253] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
[    0.936340] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.946258] omap_uart 4806a000.serial: no wakeirq for uart0
[    0.946289] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]'
[    0.947174] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    0.950103] omap_uart 4806c000.serial: no wakeirq for uart1
[    0.950164] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]'
[    0.950622] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    0.953948] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]'
[    0.954376] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    1.473449] console [ttyO2] enabled
[    1.478424] omap_uart 49042000.serial: no wakeirq for uart3
[    1.481475] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49042000[0]'
[    1.487182] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3
[    1.539581] brd: module loaded
[    1.568634] loop: module loaded
[    1.601593] twl 0-0048: PIH (irq 23) chaining IRQs 307..315
[    1.605285] twl 0-0048: power (irq 312) chaining IRQs 315..322
[    1.677001] twl4030_gpio twl4030-gpio: gpio (irq 307) chaining IRQs 323..340
[    1.681457] gpiochip_find_base: found new base at 492
[    1.685028] gpiochip_add: registered GPIOs 492 to 511 on device: twl4030
[    1.770355] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.793609] mousedev: PS/2 mouse device common for all mice
[    1.796691] i2c /dev entries driver
[    1.805145] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
[    1.808441] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[    1.812011] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]'
[    1.817108] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]'
[    1.822021] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
[    1.825744] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed
[    1.828948] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp
[    1.832214] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[    1.835815] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]'
[    1.840789] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]'
[    1.845764] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
[    1.849426] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed
[    1.904235] ledtrig-cpu: registered to indicate activity on CPUs
[    1.909790] oprofile: using arm/armv7
[    1.913085] Initializing XFRM netlink socket
[    1.915710] NET: Registered protocol family 17
[    1.918273] NET: Registered protocol family 15
[    1.921203] Key type dns_resolver registered
[    1.924102] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    1.928070] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    1.931213] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    1.935089] omap2_set_init_voltage: unable to set vdd_core
[    1.943725] ThumbEE CPU extension supported.
[    1.946105] Registering SWP/SWPB emulation handler
[    1.948730] SmartReflex Class3 initialized
[    1.967468] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[    1.973754] of_get_named_gpiod_flags: parsed 'gpio' property of node '/hsusb2_power_reg[0]' - status (0)
[    1.987030] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset
[    1.990600] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup
[    1.994567] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0)
[    1.999908] no flags found for reset
[    2.001892] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect
[    2.005828] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup
[    2.009552] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]'
[    2.014709] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]'
[    2.019775] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup
[    2.023651] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed
[    2.031860] hctosys: unable to open rtc device (rtc0)
[    2.034790] sr_init: No PMIC hook to init smartreflex
[    2.038177] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    2.042724] smartreflex smartreflex.0: omap_sr_probe: smartreflex_mpu_iva: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    2.051330] smartreflex: probe of smartreflex.0 failed with error -61
[    2.055236] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    2.059692] smartreflex smartreflex.1: omap_sr_probe: smartreflex_core: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values
[    2.067810] smartreflex: probe of smartreflex.1 failed with error -61
[    2.071502] sr_init: platform driver register failed for SR
[    2.160644] hsusb2_vbus: disabling
[    2.165069] VPLL2: disabling
[    2.167663] VUSB3V1: disabling
[    2.170227] VUSB1V8: disabling
[    2.172973] VUSB1V5: disabling
[    2.175994] VDAC: disabling
[    2.178741] VAUX3: disabling
[    2.187866] Waiting for root device /dev/mmcblk0p2...
[    2.317169] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.324920] mmc0: new high speed SDHC card at address 1234
[    2.331359] mmcblk0: mmc0:1234 SA04G 3.68 GiB 
[    2.342407]  mmcblk0: p1 p2
[    4.421539] kjournald starting.  Commit interval 5 seconds
[    4.425201] EXT3-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
[    4.827758] EXT3-fs (mmcblk0p2): using internal journal
[    4.840270] EXT3-fs (mmcblk0p2): recovery complete
[    4.842987] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    4.846923] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    4.858062] devtmpfs: mounted
[    4.860778] Freeing unused kernel memory: 432K (c0852000 - c08be000)
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
[    6.154510] udevd (93): /proc/93/oom_adj is deprecated, please use /proc/93/oom_score_adj instead.
Synthesizing the initial hotplug events
[   15.890136] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Remounting root file system...
mount: according to mtab, /proc is already mounted on /proc

WARNING: Couldn't open directory /lib/modules/4.2.0-rc5-157887-g74d3329: No such file or directory
FATAL: Could not open /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep.temp for writing: No such file or directory
root: mount: mount point /proc/bus/usb does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... modprobe: FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory

ifconfig: SIOCGIFFLAGS: No such device
modprobe: FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory

eth0      No such device

modprobe: FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory

udhcpc: SIOCGIFINDEX: No such device
done.
Starting portmap daemon: portmap.
hwclock: can't open '/dev/misc/rtc': No such file or directory
Tue Jul 22 00:18:00 UTC 2008
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1327: No soundcards found...
Starting Dropbear SSH server: [   25.502502] random: dropbear urandom read with 95 bits of entropy available
modprobe: FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory

dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting system message bus: dbus.
Starting syslogd/klogd: start-stop-daemon: lseek: Invalid argument
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Bluetooth subsystem:modprobe: FATAL: Could not load /lib/modules/4.2.0-rc5-157887-g74d3329/modules.dep: No such file or directory
 hcid
 hid2hci.

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: 
.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyO2

Angstrom 2008.1-test-20080712 beagleboard ttyO2

beagleboard login: root
login[1286]: root login  on `ttyO2'

root@beagleboard:~# 
root@beagleboard:~# %% Start PM consolidated quick test


%% Preparation


root@beagleboard:~# 
root@beagleboard:~# mount -t sysfs none /sys
mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
root@beagleboard:~# 
root@beagleboard:~# mount -t debugfs none /debug
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/pow[   32.294067] random: nonblocking pool is initialized
er/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# echo 0 > /debug/pm_debug/enable_off_mode
root@beagleboard:~# 
root@beagleboard:~# 
%% Baseline pm_debug count dump

cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1153,INA:0,ON:1154,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1153,INA:0,ON:1154,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:552,INA:601,ON:1154,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:552,INA:601,ON:1154,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (22)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo enabled >  $u/power/wakeup; done
root@beagleboard:~#
%% Start retention double suspend/resume UART wakeup test

 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  echo auto >  $u/power/control; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/wakeup; cat $u/power/wakeup; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/wakeup
enabled
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/wakeup
enabled
for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do ls -l $u/power/control; cat $u/power/control; done

-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO3/power/wakeup
enabled
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/class/tty/ttyO* | paste -s -d' '`; do  ls -l $u/power/control; cat $u/power/control; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO0/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO1/power/control
auto
echo mem > /sys/power/state

-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO2/power/control
auto
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/class/tty/ttyO3/power/control
auto
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   36.755279] PM: Syncing filesystems ... done.
[   38.390991] PM: Preparing system for sleep (mem)
[   38.427459] Freezing user space processes ... (elapsed 0.003 seconds) done.
[   38.435333] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   38.442535] PM: Suspending system (mem)
[   38.444793] Suspending console(s) (use no_console_suspend to debug)
[   38.470184] PM: suspend of devices complete after 16.418 msecs
[   38.476959] PM: late suspend of devices complete after 6.744 msecs
[   38.486267] PM: noirq suspend of devices complete after 9.277 msecs
[   38.486389] Disabling non-boot CPUs ...
[   38.486419] Successfully put all powerdomains to target state
[   38.490875] PM: noirq resume of devices complete after 4.364 msecs
[   38.496795] PM: early resume of devices complete after 4.577 msecs
[   38.889892] PM: resume of devices complete after 392.944 msecs
[   38.921508] PM: Finishing wakeup.
[   38.923370] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1270,INA:0,ON:1271,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1270,INA:0,ON:1271,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:665,INA:605,ON:1271,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:665,INA:605,ON:1271,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   41.699981] PM: Syncing filesystems ... done.
[   42.949279] PM: Preparing system for sleep (mem)
[   42.953857] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   42.959991] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   42.966461] PM: Suspending system (mem)
[   42.968566] Suspending console(s) (use no_console_suspend to debug)
[   42.990081] PM: suspend of devices complete after 12.878 msecs
[   42.996765] PM: late suspend of devices complete after 6.652 msecs
[   43.004241] PM: noirq suspend of devices complete after 7.446 msecs
[   43.004272] Disabling non-boot CPUs ...
[   43.004302] Successfully put all powerdomains to target state
[   43.008544] PM: noirq resume of devices complete after 4.150 msecs
[   43.014373] PM: early resume of devices complete after 4.547 msecs
[   43.388366] PM: resume of devices complete after 373.901 msecs
[   43.418975] PM: Finishing wakeup.
[   43.420806] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1370,INA:0,ON:1371,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1370,INA:0,ON:1371,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:761,INA:609,ON:1371,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:761,INA:609,ON:1371,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_susp
-sh: ./test_rootfs_access_nonexistent_file__ret_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention double suspend/resume UART wakeup test


%% Start retention dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:0,RET:1497,INA:0,ON:1498,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:14,INA:3,ON:18,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:0,RET:17,INA:0,ON:18,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:0,RET:1497,INA:0,ON:1498,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:0,RET:885,INA:612,ON:1498,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:0,RET:885,INA:612,ON:1498,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (13)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__ret_dyn
-sh: ./test_rootfs_access_nonexistent_file__ret_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo -1 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
-1
-rw-r--r--    1 root     root         4096 Jul 22 00:18 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
-1
root@beagleboard:~# 
root@beagleboard:~# 
%% End retention dynamic idle UART wakeup test


%% Start off-mode double suspend UART wakeup test

echo 1 > /debug/pm_debug/enable_off_mode
[   64.018493] omap3_pm_off_mode_enable: Core OFF disabled due to errata i583
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   65.027679] PM: Syncing filesystems ... done.
[   65.856872] PM: Preparing system for sleep (mem)
[   65.861389] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   65.867645] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   65.874023] PM: Suspending system (mem)
[   65.876129] Suspending console(s) (use no_console_suspend to debug)
[   65.897705] PM: suspend of devices complete after 12.908 msecs
[   65.904388] PM: late suspend of devices complete after 6.622 msecs
[   65.911682] PM: noirq suspend of devices complete after 7.263 msecs
[   65.911712] Disabling non-boot CPUs ...
[   65.911743] Successfully put all powerdomains to target state
[   65.917053] PM: noirq resume of devices complete after 5.218 msecs
[   65.924224] PM: early resume of devices complete after 4.638 msecs
[   66.298522] PM: resume of devices complete after 374.206 msecs
[   66.329162] PM: Finishing wakeup.
[   66.330993] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:46,RET:1576,INA:0,ON:1623,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:15,INA:3,ON:19,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:1,RET:17,INA:0,ON:19,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:46,RET:1576,INA:0,ON:1623,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:1,RET:1003,INA:618,ON:1623,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:1,RET:1003,INA:618,ON:1623,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# echo mem > /sys/power/state
[   69.123535] PM: Syncing filesystems ... done.
[   70.374023] PM: Preparing system for sleep (mem)
[   70.378417] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   70.384551] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   70.390869] PM: Suspending system (mem)
[   70.393035] Suspending console(s) (use no_console_suspend to debug)
[   70.414672] PM: suspend of devices complete after 13.092 msecs
[   70.421173] PM: late suspend of devices complete after 6.500 msecs
[   70.428619] PM: noirq suspend of devices complete after 7.446 msecs
[   70.428649] Disabling non-boot CPUs ...
[   70.428680] Successfully put all powerdomains to target state
[   70.433410] PM: noirq resume of devices complete after 4.638 msecs
[   70.439239] PM: early resume of devices complete after 4.394 msecs
[   70.808074] PM: resume of devices complete after 368.743 msecs
[   70.838684] PM: Finishing wakeup.
[   70.840515] Restarting tasks ... done.
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:151,RET:1576,INA:0,ON:1728,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:16,INA:3,ON:20,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:2,RET:17,INA:0,ON:20,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:151,RET:1576,INA:0,ON:1728,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:2,RET:1102,INA:623,ON:1728,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:2,RET:1102,INA:623,ON:1728,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (14)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (27)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_susp
-sh: ./test_rootfs_access_nonexistent_file__off_susp: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode double suspend UART wakeup test


%% Start off-mode dynamic idle UART wakeup test

for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do echo 3000 >  $u/power/autosuspend_delay_ms; done
root@beagleboard:~# 
root@beagleboard:~# for u in `ls -1d /sys/bus/platform/drivers/omap_uart/*.seria l | paste -s -d' '`; do ls -l  $u/power/autosuspend_delay_ms; cat $u/power/autos uspend_delay_ms; done
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/4806a000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/4806c000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/49020000.serial/power/autosuspend_delay_ms
3000
-rw-r--r--    1 root     root         4096 Jul 22 00:19 /sys/bus/platform/drivers/omap_uart/49042000.serial/power/autosuspend_delay_ms
3000
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# cat /debug/pm_debug/count
usbhost_pwrdm (ON),OFF:273,RET:1576,INA:0,ON:1850,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:0,RET:29,INA:3,ON:33,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:15,RET:17,INA:0,ON:33,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:273,RET:1576,INA:0,ON:1850,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:15,RET:1205,INA:629,ON:1850,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:15,RET:1205,INA:629,ON:1850,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (13)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# 
root@beagleboard:~# ./test_rootfs_access_nonexistent_file__off_dyn
-sh: ./test_rootfs_access_nonexistent_file__off_dyn: not found
root@beagleboard:~# 
root@beagleboard:~# 
%% End off-mode dynamic idle UART wakeup test


%% End PM consolidated quick test