Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################## done Bytes transferred = 3528885 (35d8b5 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3528821 Bytes = 3.4 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-rc7-158278-g2c6625c (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Aug 16 23:08:48 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c0972240, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @cfc3d000 s20672 r8192 d24384 u53248 [ 0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 223736K/261120K available (6301K kernel code, 738K rwdata, 2192K rodata, 432K init, 8225K bss, 21000K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0853868 (8495 kB) [ 0.000000] .init : 0xc0854000 - 0xc08c0000 ( 432 kB) [ 0.000000] .data : 0xc08c0000 - 0xc09788e0 ( 739 kB) [ 0.000000] .bss : 0xc097b000 - 0xc11836d0 (8226 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000033] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000079] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000190] OMAP clocksource: timer1 at 13000000 Hz [ 0.001682] Console: colour dummy device 80x30 [ 0.001775] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001793] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001808] ... MAX_LOCK_DEPTH: 48 [ 0.001823] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001838] ... CLASSHASH_SIZE: 4096 [ 0.001852] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001866] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001880] ... CHAINHASH_SIZE: 32768 [ 0.001895] memory used by lock dependency info: 5167 kB [ 0.001910] per task-struct memory footprint: 1536 bytes [ 0.001956] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.095607] pid_max: default: 32768 minimum: 301 [ 0.096313] Security Framework initialized [ 0.096546] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096576] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101895] Initializing cgroup subsys blkio [ 0.102050] Initializing cgroup subsys memory [ 0.102217] Initializing cgroup subsys devices [ 0.102368] Initializing cgroup subsys freezer [ 0.102587] Initializing cgroup subsys perf_event [ 0.102702] CPU: Testing write buffer coherency: ok [ 0.105160] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.105372] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.113482] Brought up 1 CPUs [ 0.113524] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.113543] CPU: All CPU(s) started in SVC mode. [ 0.119829] devtmpfs: initialized [ 0.242582] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.324305] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.326754] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.411251] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.411288] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.427302] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.431344] pinctrl core: initialized pinctrl subsystem [ 0.440259] NET: Registered protocol family 16 [ 0.450994] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.454845] cpuidle: using governor ladder [ 0.454897] cpuidle: using governor menu [ 0.455991] Reprogramming SDRC clock to 332000000 Hz [ 0.460386] In-band Error seen by USB_OTG at address 0 [ 0.460414] ------------[ cut here ]------------ [ 0.460463] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.460481] Modules linked in: [ 0.460517] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc7-158278-g2c6625c #1 [ 0.460535] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.460583] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.460616] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.460648] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.460677] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.460706] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.460747] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.460777] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x40/0x64) [ 0.460809] [] (handle_irq_event) from [] (handle_level_irq+0xc0/0x150) [ 0.460839] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.460867] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.460897] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xa8/0xb8) [ 0.460934] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.460953] Exception stack(0xce0a3cf0 to 0xce0a3d38) [ 0.460976] 3ce0: 00000001 ce0a1228 00000000 ce0a0d00 [ 0.461000] 3d00: 60000153 ce013c64 ce013c64 00000000 0000001a 60000153 ce013c3c 00000000 [ 0.461021] 3d20: 00000000 ce0a3d38 c008f26c c05f8b04 20000153 ffffffff [ 0.461051] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.461081] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x390/0x520) [ 0.461110] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.461141] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe0/0x164) [ 0.461184] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.461216] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.461246] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.461275] [] (bus_for_each_drv) from [] (__device_attach+0x8c/0xdc) [ 0.461303] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 0.461330] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.461371] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.461402] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.461432] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.461471] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.461499] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.461529] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.461558] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d8) [ 0.461599] [] (do_one_initcall) from [] (kernel_init_freeable+0x204/0x2e0) [ 0.461637] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.461671] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.461849] ---[ end trace 7d58311e4eae7938 ]--- [ 0.466799] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.474914] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.476799] OMAP GPIO hardware version 2.5 [ 0.479172] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.482601] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.486111] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.489533] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.492902] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.511290] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.512225] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.525278] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.525631] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.529294] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.690664] No ATAGs? [ 0.690717] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.695854] OMAP DMA hardware revision 4.0 [ 0.756497] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.758039] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.759561] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.760795] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.762050] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.763335] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.763668] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.764851] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.765119] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.766529] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.774230] SCSI subsystem initialized [ 0.775625] libata version 3.00 loaded. [ 0.777090] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.777247] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.778193] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.781835] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.782275] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.790598] clocksource: Switched to clocksource timer1 [ 1.063322] NET: Registered protocol family 2 [ 1.066697] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.066807] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.067945] TCP: Hash tables configured (established 2048 bind 2048) [ 1.068354] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.068681] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.070582] NET: Registered protocol family 1 [ 1.073675] RPC: Registered named UNIX socket transport module. [ 1.073715] RPC: Registered udp transport module. [ 1.073735] RPC: Registered tcp transport module. [ 1.073754] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.081793] hw perfevents: Failed to parse /pmu/interrupt-affinity[0] [ 1.081997] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.092122] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.092527] audit: initializing netlink subsys (disabled) [ 1.092957] audit: type=2000 audit(1.090:1): initialized [ 1.100957] VFS: Disk quotas dquot_6.6.0 [ 1.101217] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.105986] NFS: Registering the id_resolver key type [ 1.106689] Key type id_resolver registered [ 1.106717] Key type id_legacy registered [ 1.107039] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.115786] io scheduler noop registered [ 1.115845] io scheduler deadline registered [ 1.115937] io scheduler cfq registered (default) [ 1.120966] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.121943] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.123165] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36 [ 1.130868] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.142967] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.143018] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.143774] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.147711] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.147762] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.148460] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.151119] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.151166] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.151664] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.579434] console [ttyO2] enabled [ 2.641684] brd: module loaded [ 2.676834] loop: module loaded [ 2.685442] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.694613] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.701442] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.706284] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.714461] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.720811] Creating 5 MTD partitions on "omap2-nand.0": [ 2.726388] 0x000000000000-0x000000080000 : "xloader" [ 2.741949] 0x000000080000-0x000000260000 : "uboot" [ 2.754209] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.766207] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.780920] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.263346] libphy: smsc911x-mdio: probed [ 3.268137] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.281794] smsc911x 2d000000.ethernet eth0: MAC Address: 06:fd:f0:ea:58:23 [ 3.340207] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.346703] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.357709] libphy: davinci_mdio.0: probed [ 3.362219] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.370863] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.385224] mousedev: PS/2 mouse device common for all mice [ 3.391286] i2c /dev entries driver [ 3.401154] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.407473] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.414597] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.425001] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.429857] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.436207] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.443148] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.453517] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.501969] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.508287] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.515269] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.524900] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.534420] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.541835] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.549088] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.559371] ledtrig-cpu: registered to indicate activity on CPUs [ 3.568243] oprofile: using arm/armv7 [ 3.573535] Initializing XFRM netlink socket [ 3.578295] NET: Registered protocol family 17 [ 3.583234] NET: Registered protocol family 15 [ 3.588551] Key type dns_resolver registered [ 3.593617] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.601283] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.607344] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.614694] omap2_set_init_voltage: unable to set vdd_core [ 3.622419] PM: no software I/O chain control; some wakeups may be lost [ 3.629417] pm: Failed to request pm_wkup irq [ 3.634189] ThumbEE CPU extension supported. [ 3.638719] Registering SWP/SWPB emulation handler [ 3.643828] SmartReflex Class3 initialized [ 3.668734] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.681425] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.692703] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.699550] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.706877] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.716998] no flags found for reset [ 3.720821] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.728198] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.735376] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.745270] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.755068] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.762435] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.771482] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.778336] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.785687] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.795812] no flags found for reset [ 3.799575] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.807018] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.814196] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.824091] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.833886] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.841236] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.856684] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.867851] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.875264] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.881700] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.888563] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.898195] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.907715] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.914799] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.935713] mmc0: new high speed SDHC card at address b368 [ 3.945503] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 3.959385] mmcblk0: p1 p2 [ 4.028760] hctosys: unable to open rtc device (rtc0) [ 4.034279] sr_init: No PMIC hook to init smartreflex [ 4.040743] sr_init: platform driver register failed for SR [ 4.131309] ads7846-reg: disabling [ 4.134925] hsusb2_vbus: disabling [ 4.138493] hsusb1_vbus: disabling [ 4.175790] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.189086] devtmpfs: mounted [ 4.193920] Freeing unused kernel memory: 432K (c0854000 - c08c0000) /bin/sh: can't access tty; job control turned off # # #