Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################### done Bytes transferred = 3526885 (35d0e5 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3526821 Bytes = 3.4 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-rc8-158415-gc13dcf9 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Aug 25 10:27:44 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c0972200, node_mem_map cfcb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @cfc3d000 s20672 r8192 d24384 u53248 [ 0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 223736K/261120K available (6297K kernel code, 738K rwdata, 2192K rodata, 436K init, 8225K bss, 21000K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0852848 (8491 kB) [ 0.000000] .init : 0xc0853000 - 0xc08c0000 ( 436 kB) [ 0.000000] .data : 0xc08c0000 - 0xc09788a0 ( 739 kB) [ 0.000000] .bss : 0xc097b000 - 0xc11836d0 (8226 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000033] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000075] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000182] OMAP clocksource: timer1 at 13000000 Hz [ 0.001662] Console: colour dummy device 80x30 [ 0.001756] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001774] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001789] ... MAX_LOCK_DEPTH: 48 [ 0.001804] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001818] ... CLASSHASH_SIZE: 4096 [ 0.001833] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001847] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001861] ... CHAINHASH_SIZE: 32768 [ 0.001876] memory used by lock dependency info: 5167 kB [ 0.001891] per task-struct memory footprint: 1536 bytes [ 0.001937] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.095604] pid_max: default: 32768 minimum: 301 [ 0.096293] Security Framework initialized [ 0.096525] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096554] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101934] Initializing cgroup subsys blkio [ 0.102094] Initializing cgroup subsys memory [ 0.102255] Initializing cgroup subsys devices [ 0.102402] Initializing cgroup subsys freezer [ 0.102624] Initializing cgroup subsys perf_event [ 0.102740] CPU: Testing write buffer coherency: ok [ 0.105200] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.105409] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.113599] Brought up 1 CPUs [ 0.113638] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.113658] CPU: All CPU(s) started in SVC mode. [ 0.119954] devtmpfs: initialized [ 0.244439] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.326163] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.328503] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.413036] omap_hwmod: uart4: _wait_target_ready failed: -16 [ 0.413072] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.429082] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.433149] pinctrl core: initialized pinctrl subsystem [ 0.441983] NET: Registered protocol family 16 [ 0.452677] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.456752] cpuidle: using governor ladder [ 0.456805] cpuidle: using governor menu [ 0.457750] Reprogramming SDRC clock to 332000000 Hz [ 0.462164] In-band Error seen by USB_OTG at address 0 [ 0.462194] ------------[ cut here ]------------ [ 0.462242] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.462260] Modules linked in: [ 0.462294] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8-158415-gc13dcf9 #1 [ 0.462312] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.462361] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.462392] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.462423] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.462451] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.462480] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.462520] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x204) [ 0.462551] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x40/0x64) [ 0.462585] [] (handle_irq_event) from [] (handle_level_irq+0xc0/0x150) [ 0.462615] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.462644] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.462674] [] (__handle_domain_irq) from [] (omap_intc_handle_irq+0xa8/0xb8) [ 0.462711] [] (omap_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.462729] Exception stack(0xce0a3cf0 to 0xce0a3d38) [ 0.462751] 3ce0: 00000001 ce0a1228 00000000 ce0a0d00 [ 0.462775] 3d00: 60000153 ce013c64 ce013c64 00000000 0000001a 60000153 ce013c3c 00000000 [ 0.462796] 3d20: 00000000 ce0a3d38 c008f26c c05f85b4 20000153 ffffffff [ 0.462826] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.462855] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x390/0x520) [ 0.462886] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x158) [ 0.462916] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe0/0x164) [ 0.462961] [] (omap3_l3_probe) from [] (platform_drv_probe+0x48/0xa4) [ 0.462995] [] (platform_drv_probe) from [] (driver_probe_device+0x1c4/0x26c) [ 0.463025] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.463053] [] (bus_for_each_drv) from [] (__device_attach+0x8c/0xdc) [ 0.463082] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 0.463109] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.463150] [] (device_add) from [] (of_platform_device_create_pdata+0x74/0xb0) [ 0.463183] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.463213] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.463251] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.463281] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.463312] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.463341] [] (customize_machine) from [] (do_one_initcall+0x80/0x1d8) [ 0.463381] [] (do_one_initcall) from [] (kernel_init_freeable+0x204/0x2e0) [ 0.463419] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.463454] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.463633] ---[ end trace 15352085d2c8ccb9 ]--- [ 0.468612] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.476927] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.478611] OMAP GPIO hardware version 2.5 [ 0.481001] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.484437] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.488000] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.491375] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.494716] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.513232] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.514179] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.527592] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.527944] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.531456] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.700676] No ATAGs? [ 0.700727] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.705840] OMAP DMA hardware revision 4.0 [ 0.766460] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.767969] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.769506] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.770738] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.771997] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.773291] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.773616] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.774797] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.775069] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.776483] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.784167] SCSI subsystem initialized [ 0.785554] libata version 3.00 loaded. [ 0.787003] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.787160] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.788103] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.791728] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.792165] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.800495] clocksource: Switched to clocksource timer1 [ 1.072451] NET: Registered protocol family 2 [ 1.075658] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.075769] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.076907] TCP: Hash tables configured (established 2048 bind 2048) [ 1.077314] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.077643] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.079333] NET: Registered protocol family 1 [ 1.082662] RPC: Registered named UNIX socket transport module. [ 1.082699] RPC: Registered udp transport module. [ 1.082720] RPC: Registered tcp transport module. [ 1.082739] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.090739] hw perfevents: Failed to parse /pmu/interrupt-affinity[0] [ 1.090941] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.101050] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.101458] audit: initializing netlink subsys (disabled) [ 1.101896] audit: type=2000 audit(1.100:1): initialized [ 1.109547] VFS: Disk quotas dquot_6.6.0 [ 1.109798] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.114969] NFS: Registering the id_resolver key type [ 1.115731] Key type id_resolver registered [ 1.115759] Key type id_legacy registered [ 1.116079] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.124920] io scheduler noop registered [ 1.124976] io scheduler deadline registered [ 1.125071] io scheduler cfq registered (default) [ 1.129719] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.131024] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.132250] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36 [ 1.139593] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.152107] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.152160] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.152897] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.156597] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.156647] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.157329] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.159672] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.159716] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.160501] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.587937] console [ttyO2] enabled [ 2.649735] brd: module loaded [ 2.685048] loop: module loaded [ 2.693690] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.702862] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.709525] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.714476] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.722647] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.728941] Creating 5 MTD partitions on "omap2-nand.0": [ 2.734579] 0x000000000000-0x000000080000 : "xloader" [ 2.750221] 0x000000080000-0x000000260000 : "uboot" [ 2.762480] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.774496] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.789098] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.271598] libphy: smsc911x-mdio: probed [ 3.276395] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.290099] smsc911x 2d000000.ethernet eth0: MAC Address: 5e:5a:4d:e1:f8:76 [ 3.340102] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.346595] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.357596] libphy: davinci_mdio.0: probed [ 3.362106] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.370744] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.385095] mousedev: PS/2 mouse device common for all mice [ 3.391165] i2c /dev entries driver [ 3.400992] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.407314] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.414436] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.424842] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.429696] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.436048] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.442994] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.453359] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.501867] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.508182] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.515170] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.524804] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.534323] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.541719] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.548976] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.559216] ledtrig-cpu: registered to indicate activity on CPUs [ 3.568071] oprofile: using arm/armv7 [ 3.573365] Initializing XFRM netlink socket [ 3.578126] NET: Registered protocol family 17 [ 3.583061] NET: Registered protocol family 15 [ 3.588385] Key type dns_resolver registered [ 3.593447] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.601109] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.607173] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.614567] omap2_set_init_voltage: unable to set vdd_core [ 3.622319] PM: no software I/O chain control; some wakeups may be lost [ 3.629325] pm: Failed to request pm_wkup irq [ 3.634105] ThumbEE CPU extension supported. [ 3.638638] Registering SWP/SWPB emulation handler [ 3.643752] SmartReflex Class3 initialized [ 3.668740] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.681436] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.692735] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.699588] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.706909] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.717031] no flags found for reset [ 3.720858] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.728235] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.735404] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.745296] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.755094] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.762456] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.771490] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.778338] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.785690] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.795797] no flags found for reset [ 3.799563] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.807014] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.814193] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.824094] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.833891] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.841250] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.856672] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.867823] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.875236] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.881678] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.888535] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.898165] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.907687] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.914769] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.935653] mmc0: new high speed SDHC card at address b368 [ 3.945446] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 3.959369] mmcblk0: p1 p2 [ 4.028624] hctosys: unable to open rtc device (rtc0) [ 4.034142] sr_init: No PMIC hook to init smartreflex [ 4.040573] sr_init: platform driver register failed for SR [ 4.130221] ads7846-reg: disabling [ 4.133837] hsusb2_vbus: disabling [ 4.137406] hsusb1_vbus: disabling [ 4.174574] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 4.187848] devtmpfs: mounted [ 4.192689] Freeing unused kernel memory: 436K (c0853000 - c08c0000) /bin/sh: can't access tty; job control turned off # # #