U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete em - CRC mode, 8(SOH)/3556(STX)/0(CAN) packets, 3 retries ## Total Size = 0x003792a1 = 3642017 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3641953 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-rc4-170966-g049e6dd (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Oct 4 14:36:43 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c09c4380, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67072 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @eee94000 s25088 r8192 d24064 u57344 [ 0.000000] pcpu-alloc: s25088 r8192 d24064 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259922 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001372K/1046528K available (6566K kernel code, 744K rwdata, 2228K rodata, 452K init, 8263K bss, 28772K reserved, 16384K cma-reserved, 251904K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc089ec78 (8796 kB) [ 0.000000] .init : 0xc089f000 - 0xc0910000 ( 452 kB) [ 0.000000] .data : 0xc0910000 - 0xc09ca318 ( 745 kB) [ 0.000000] .bss : 0xc09cd000 - 0xc11dee78 (8264 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002075] Console: colour dummy device 80x30 [ 0.002136] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002136] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002136] ... MAX_LOCK_DEPTH: 48 [ 0.002136] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002166] ... CLASSHASH_SIZE: 4096 [ 0.002166] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002166] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002166] ... CHAINHASH_SIZE: 32768 [ 0.002197] memory used by lock dependency info: 5167 kB [ 0.002197] per task-struct memory footprint: 1536 bytes [ 0.002227] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080261] pid_max: default: 32768 minimum: 301 [ 0.080657] Security Framework initialized [ 0.080810] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080810] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084136] Initializing cgroup subsys io [ 0.084228] Initializing cgroup subsys memory [ 0.084350] Initializing cgroup subsys devices [ 0.084442] Initializing cgroup subsys freezer [ 0.084564] Initializing cgroup subsys perf_event [ 0.084625] CPU: Testing write buffer coherency: ok [ 0.086090] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086181] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180267] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181030] Brought up 2 CPUs [ 0.181030] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181060] CPU: All CPU(s) started in SVC mode. [ 0.184509] devtmpfs: initialized [ 0.240356] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.245361] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.249938] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.432495] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.435058] pinctrl core: initialized pinctrl subsystem [ 0.440490] NET: Registered protocol family 16 [ 0.445922] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.470458] cpuidle: using governor ladder [ 0.500335] cpuidle: using governor menu [ 0.514160] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.515014] OMAP GPIO hardware version 0.1 [ 0.516265] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.518218] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.520111] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.522064] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.523956] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.545288] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.545837] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.553985] No ATAGs? [ 0.554077] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.554077] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.557281] OMAP DMA hardware revision 0.0 [ 0.615600] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.616638] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.617553] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.621826] SCSI subsystem initialized [ 0.622344] libata version 3.00 loaded. [ 0.623046] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.623626] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.623718] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.623809] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.624176] pps_core: LinuxPPS API ver. 1 registered [ 0.624176] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.624237] PTP clock support registered [ 0.628570] clocksource: Switched to clocksource 32k_counter [ 0.769866] NET: Registered protocol family 2 [ 0.771972] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.772155] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.774688] TCP: Hash tables configured (established 8192 bind 8192) [ 0.775024] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.775390] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.776489] NET: Registered protocol family 1 [ 0.778137] RPC: Registered named UNIX socket transport module. [ 0.778167] RPC: Registered udp transport module. [ 0.778167] RPC: Registered tcp transport module. [ 0.778198] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.783569] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.789154] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.789459] audit: initializing netlink subsys (disabled) [ 0.789703] audit: type=2000 audit(0.770:1): initialized [ 0.793518] VFS: Disk quotas dquot_6.6.0 [ 0.793823] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.796508] NFS: Registering the id_resolver key type [ 0.797027] Key type id_resolver registered [ 0.797058] Key type id_legacy registered [ 0.797271] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.803070] bounce: pool size: 64 pages [ 0.803192] io scheduler noop registered [ 0.803222] io scheduler deadline registered [ 0.803283] io scheduler cfq registered (default) [ 0.806915] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.807647] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.814117] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.820190] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.820190] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.820709] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.822601] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.822601] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.822875] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.824035] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.824035] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.824310] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.840270] console [ttyO2] enabled [ 1.877349] brd: module loaded [ 1.902404] loop: module loaded [ 1.908782] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.922515] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.932952] spi1.0 supply vdd-io not found, using dummy regulator [ 1.939819] spi1.0 supply vdd not found, using dummy regulator [ 1.946105] ks8851 spi1.0: message enable is 0 [ 1.957244] ks8851 spi1.0 eth0: revision 1, MAC 2a:b6:1a:bc:d0:ce, IRQ 202, no EEPROM [ 1.969848] mousedev: PS/2 mouse device common for all mice [ 1.975708] i2c /dev entries driver [ 1.980957] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.987274] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.994140] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.003723] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.013214] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.020416] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.026519] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.032836] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.039703] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.049285] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.058807] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.065826] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.100677] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.106964] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.113861] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.123443] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.132934] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.139984] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.169036] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.175323] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.182250] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.192626] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.197448] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.203765] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.210632] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.220214] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.229705] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.236724] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.289581] ledtrig-cpu: registered to indicate activity on CPUs [ 2.297149] oprofile: using arm/armv7-ca9 [ 2.302246] Initializing XFRM netlink socket [ 2.307220] NET: Registered protocol family 10 [ 2.315063] sit: IPv6 over IPv4 tunneling driver [ 2.322174] NET: Registered protocol family 17 [ 2.326904] NET: Registered protocol family 15 [ 2.332000] Key type dns_resolver registered [ 2.336761] twl: not initialized [ 2.340179] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.348571] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.356994] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.365417] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.373840] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.382232] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.390655] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.399078] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.406280] omap2_set_init_voltage: unable to set vdd_mpu [ 2.411987] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.419281] omap2_set_init_voltage: unable to set vdd_core [ 2.425048] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.432281] omap2_set_init_voltage: unable to set vdd_iva [ 2.440246] Power Management for TI OMAP4+ devices. [ 2.445343] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.452728] ThumbEE CPU extension supported. [ 2.452728] Registering SWP/SWPB emulation handler [ 2.463409] SmartReflex Class3 initialized [ 2.472595] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.484619] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.491577] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.498779] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.508850] no flags found for reset [ 2.512603] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.520019] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.524444] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.536987] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.546752] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.554107] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.568817] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.568817] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.586486] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.593872] mmc0: new high speed SDHC card at address b368 [ 2.594787] twl 0-0048: PIH (irq 327) nested IRQs [ 2.610137] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.619354] mmcblk0: p1 p2 [ 2.622344] VUSIM: failed to get the current voltage(-22) [ 2.628601] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.640014] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.658599] twl6040 0-004b: clk32k is not handled [ 2.670440] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.684997] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.695037] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.702636] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.702880] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.715698] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.722564] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.732147] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.741638] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.748687] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.748687] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.761138] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.761138] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.777557] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.787048] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.794097] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.794128] ------------[ cut here ]------------ [ 2.806945] WARNING: CPU: 0 PID: 65 at drivers/regulator/core.c:2104 _regulator_disable+0x140/0x184() [ 2.806945] unbalanced disables for pbias_mmc_omap4 [ 2.821746] Modules linked in: [ 2.824798] CPU: 0 PID: 65 Comm: kworker/u4:1 Not tainted 4.3.0-rc4-170966-g049e6dd #1 [ 2.833282] Hardware name: Generic OMAP4 (Flattened Device Tree) [ 2.839599] Workqueue: deferwq deferred_probe_work_func [ 2.845123] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.853271] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 2.860900] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 2.869384] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 2.878540] [] (warn_slowpath_fmt) from [] (_regulator_disable+0x140/0x184) [ 2.878540] [] (_regulator_disable) from [] (regulator_disable+0x34/0x60) [ 2.896606] [] (regulator_disable) from [] (omap_hsmmc_set_power+0x158/0x1d4) [ 2.905944] [] (omap_hsmmc_set_power) from [] (omap_hsmmc_set_ios+0x204/0x264) [ 2.915344] [] (omap_hsmmc_set_ios) from [] (mmc_set_initial_state+0x48/0x4c) [ 2.924652] [] (mmc_set_initial_state) from [] (mmc_power_up+0x3c/0x104) [ 2.933532] [] (mmc_power_up) from [] (mmc_start_host+0x40/0x6c) [ 2.941680] [] (mmc_start_host) from [] (mmc_add_host+0x5c/0x84) [ 2.941711] [] (mmc_add_host) from [] (omap_hsmmc_probe+0x5cc/0xa10) [ 2.958312] [] (omap_hsmmc_probe) from [] (platform_drv_probe+0x48/0xa4) [ 2.967193] [] (platform_drv_probe) from [] (driver_probe_device+0x1dc/0x2a0) [ 2.976501] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 2.985473] [] (bus_for_each_drv) from [] (__device_attach+0xa4/0x108) [ 2.994140] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 3.002746] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x90) [ 3.012176] [] (deferred_probe_work_func) from [] (process_one_work+0x1b4/0x4b0) [ 3.021759] [] (process_one_work) from [] (worker_thread+0x154/0x470) [ 3.030364] [] (worker_thread) from [] (kthread+0xd4/0xf0) [ 3.037933] [] (kthread) from [] (ret_from_fork+0x14/0x24) [ 3.045532] ---[ end trace 4866cb473e75b1b8 ]--- [ 3.050384] omap_hsmmc 4809c000.mmc: pbias reg disable fail [ 3.089477] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 3.095825] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 3.102722] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 3.112304] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 3.121856] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 3.128936] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 3.140411] hw-breakpoint: CPU 0 failed to disable vector catch [ 3.169067] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.179931] mmc1: new high speed SDHC card at address 0007 [ 3.187225] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 3.194488] mmcblk1: p1 p2 [ 3.260955] hctosys: unable to open rtc device (rtc0) [ 3.266479] sr_init: No PMIC hook to init smartreflex [ 3.271820] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.271820] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.272644] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.272644] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.317138] pbias_mmc_omap4: disabling [ 3.322357] VAUX1_6030: disabling [ 3.328521] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.334350] VMMC: disabling [ 3.339233] VDAC: disabling [ 3.343231] VANA: disabling [ 3.347259] VUSB: disabling [ 3.351959] mmc2: new SDIO card at address 0001 [ 3.413574] mmcblk1: error -110 sending status command, retrying [ 3.446350] mmcblk1: error -110 sending status command, retrying [ 3.479156] mmcblk1: error -110 sending status command, aborting [ 3.553375] mmc1: tried to reset card [ 3.558380] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.570159] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.603790] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.611480] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 7.088531] EXT4-fs (mmcblk1p2): recovery complete [ 7.109741] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.118530] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.131195] devtmpfs: mounted [ 7.135131] Freeing unused kernel memory: 452K (c089f000 - c0910000) [ 7.443084] random: init urandom read with 31 bits of entropy available [ 7.465301] init: Failed to create pty - disabling logging for job [ 7.472503] init: Temporary process spawn error: No space left on device [ 7.525634] init: Failed to create pty - disabling logging for job [ 7.532653] init: Temporary process spawn error: No space left on device [ 7.563354] init: Failed to create pty - disabling logging for job [ 7.570617] init: Temporary process spawn error: No space left on device [ 7.581695] init: Failed to create pty - disabling logging for job [ 7.589874] init: Temporary process spawn error: No space left on device [ 7.668060] init: hwclock main process (83) terminated with status 1 [ 7.740905] init: ureadahead main process (84) terminated with status 5 [ 7.941345] init: Failed to create pty - disabling logging for job [ 7.948242] init: Temporary process spawn error: No space left on device [ 7.989440] init: Failed to create pty - disabling logging for job [ 7.996337] init: Temporary process spawn error: No space left on device [ 8.089874] init: Failed to create pty - disabling logging for job [ 8.096557] init: Temporary process spawn error: No space left on device [ 8.562561] udevd[140]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177403/963584 files, 2989975/7708672 blocks [ 11.824829] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.961181] init: udev-fallback-graphics main process (421) terminated with status 1 [ 12.172149] random: nonblocking pool is initialized [ 12.222869] init: plymouth-splash main process (432) terminated with status 2 [ 12.249084] init: plymouth main process (85) killed by SEGV signal mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 12.642761] init: plymouth-log main process (485) terminated with status 1 [ 12.693267] init: failsafe main process (486) killed by TERM signal [ 13.549011] init: plymouth-upstart-bridge main process (533) terminated with status 1 [ 13.644592] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 14.217254] init: bluetooth main process (545) terminated with status 1 [ 14.246856] init: bluetooth main process ended, respawning [ 14.300415] init: alsa-restore main process (575) terminated with status 19 [ 14.338867] init: hybrid-gfx main process (588) terminated with status 1 FATAL: Could not load /lib/modules/4.3.0-rc4-170966-g049e6dd/modules.dep: No such file or directory [ 15.128936] init: bluetooth main process (663) terminated with status 1 [ 15.136627] init: bluetooth main process ended, respawning [ 15.313171] init: bluetooth main process (690) terminated with status 1 [ 15.320831] init: bluetooth main process ended, respawning [ 15.501922] init: bluetooth main process (707) terminated with status 1 [ 15.509643] init: bluetooth main process ended, respawning [ 15.787994] init: bluetooth main process (726) terminated with status 1 [ 15.795928] init: bluetooth main process ended, respawning [ 16.043151] init: bluetooth main process (746) terminated with status 1 [ 16.055358] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 16.568603] init: bluetooth main process (774) terminated with status 1 [ 16.576812] init: bluetooth main process ended, respawning [ 16.824676] init: lightdm main process (627) terminated with status 1 [ 16.912475] init: bluetooth main process (796) terminated with status 1 [ 16.920288] init: bluetooth main process ended, respawning [ 17.110778] init: bluetooth main process (814) terminated with status 1 [ 17.118133] init: bluetooth main process ended, respawning