U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 5(SOH)/3553(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00378569 = 3638633 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3638569 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-rc6-171283-g7379047 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Oct 18 20:16:14 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c09c1ac0, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67072 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @eee94000 s25088 r8192 d24064 u57344 [ 0.000000] pcpu-alloc: s25088 r8192 d24064 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259922 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001384K/1046528K available (6562K kernel code, 742K rwdata, 2224K rodata, 452K init, 8263K bss, 28760K reserved, 16384K cma-reserved, 251904K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc089cb8c (8787 kB) [ 0.000000] .init : 0xc089d000 - 0xc090e000 ( 452 kB) [ 0.000000] .data : 0xc090e000 - 0xc09c7a58 ( 743 kB) [ 0.000000] .bss : 0xc09ca000 - 0xc11dbe78 (8264 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002105] Console: colour dummy device 80x30 [ 0.002166] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002166] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002166] ... MAX_LOCK_DEPTH: 48 [ 0.002166] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002197] ... CLASSHASH_SIZE: 4096 [ 0.002197] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002197] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002227] ... CHAINHASH_SIZE: 32768 [ 0.002227] memory used by lock dependency info: 5167 kB [ 0.002227] per task-struct memory footprint: 1536 bytes [ 0.002258] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080291] pid_max: default: 32768 minimum: 301 [ 0.080688] Security Framework initialized [ 0.080841] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080841] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084136] Initializing cgroup subsys io [ 0.084259] Initializing cgroup subsys memory [ 0.084350] Initializing cgroup subsys devices [ 0.084472] Initializing cgroup subsys freezer [ 0.084594] Initializing cgroup subsys perf_event [ 0.084655] CPU: Testing write buffer coherency: ok [ 0.086120] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086212] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180297] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181060] Brought up 2 CPUs [ 0.181060] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181091] CPU: All CPU(s) started in SVC mode. [ 0.184509] devtmpfs: initialized [ 0.240600] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.245635] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.250335] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.434936] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.437255] pinctrl core: initialized pinctrl subsystem [ 0.442840] NET: Registered protocol family 16 [ 0.448242] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.480499] cpuidle: using governor ladder [ 0.510345] cpuidle: using governor menu [ 0.524169] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.525024] OMAP GPIO hardware version 0.1 [ 0.526275] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.528228] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.530120] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.532073] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.533966] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.555175] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.555725] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.563812] No ATAGs? [ 0.563903] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.563903] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.567077] OMAP DMA hardware revision 0.0 [ 0.625579] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.626617] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.627502] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.631835] SCSI subsystem initialized [ 0.632354] libata version 3.00 loaded. [ 0.633056] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.633605] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.633697] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.633789] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.634155] pps_core: LinuxPPS API ver. 1 registered [ 0.634185] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.634246] PTP clock support registered [ 0.638549] clocksource: Switched to clocksource 32k_counter [ 0.779266] NET: Registered protocol family 2 [ 0.781402] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.781585] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.784118] TCP: Hash tables configured (established 8192 bind 8192) [ 0.784454] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.784820] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.785919] NET: Registered protocol family 1 [ 0.787567] RPC: Registered named UNIX socket transport module. [ 0.787597] RPC: Registered udp transport module. [ 0.787597] RPC: Registered tcp transport module. [ 0.787597] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.792999] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.798553] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.798858] audit: initializing netlink subsys (disabled) [ 0.799102] audit: type=2000 audit(0.780:1): initialized [ 0.802886] VFS: Disk quotas dquot_6.6.0 [ 0.803222] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.805877] NFS: Registering the id_resolver key type [ 0.806365] Key type id_resolver registered [ 0.806365] Key type id_legacy registered [ 0.806610] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.812469] bounce: pool size: 64 pages [ 0.812591] io scheduler noop registered [ 0.812622] io scheduler deadline registered [ 0.812683] io scheduler cfq registered (default) [ 0.816253] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.816986] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.823364] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.829406] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.829437] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.829925] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.831817] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.831817] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.832092] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.833221] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.833251] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.833496] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.849792] console [ttyO2] enabled [ 1.886962] brd: module loaded [ 1.911956] loop: module loaded [ 1.918304] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.932128] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.942565] spi1.0 supply vdd-io not found, using dummy regulator [ 1.949462] spi1.0 supply vdd not found, using dummy regulator [ 1.955718] ks8851 spi1.0: message enable is 0 [ 1.966796] ks8851 spi1.0 eth0: revision 1, MAC 32:b4:57:c9:97:9e, IRQ 202, no EEPROM [ 1.979339] mousedev: PS/2 mouse device common for all mice [ 1.985168] i2c /dev entries driver [ 1.990417] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.996704] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.003601] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.013183] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.022705] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.029876] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.036010] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.042327] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.049194] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.058776] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.068267] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.075286] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.110656] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.116943] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.123840] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.133422] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.142913] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.149963] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.179016] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.185302] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.192230] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.202606] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.207427] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.213745] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.220611] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.230194] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.239715] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.246734] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.289489] ledtrig-cpu: registered to indicate activity on CPUs [ 2.296997] oprofile: using arm/armv7-ca9 [ 2.302459] Initializing XFRM netlink socket [ 2.307434] NET: Registered protocol family 10 [ 2.315277] sit: IPv6 over IPv4 tunneling driver [ 2.322418] NET: Registered protocol family 17 [ 2.327148] NET: Registered protocol family 15 [ 2.332244] Key type dns_resolver registered [ 2.337036] twl: not initialized [ 2.340454] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.348876] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.357269] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.365692] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.374114] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.382537] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.390960] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.399383] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.406585] omap2_set_init_voltage: unable to set vdd_mpu [ 2.412292] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.419586] omap2_set_init_voltage: unable to set vdd_core [ 2.425354] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.432586] omap2_set_init_voltage: unable to set vdd_iva [ 2.440551] Power Management for TI OMAP4+ devices. [ 2.445648] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.453033] ThumbEE CPU extension supported. [ 2.458709] Registering SWP/SWPB emulation handler [ 2.458709] SmartReflex Class3 initialized [ 2.473358] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.485198] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.492156] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.499328] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.509429] no flags found for reset [ 2.509460] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.520599] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.527709] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.537567] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.547363] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.554687] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.569458] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.569458] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.587066] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.594482] mmc0: new high speed SDHC card at address b368 [ 2.595367] twl 0-0048: PIH (irq 327) nested IRQs [ 2.610778] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.620452] mmcblk0: p1 p2 [ 2.623229] VUSIM: failed to get the current voltage(-22) [ 2.623229] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.627319] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.639678] twl6040 0-004b: clk32k is not handled [ 2.644165] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.665130] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.673431] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.682281] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.688507] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.688903] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.702026] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.711608] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.721099] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.721130] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.734252] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.740570] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.747406] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.756988] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.766479] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.773529] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.782196] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.839141] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.845642] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.852539] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.862121] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.871643] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.878723] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.918395] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.929748] mmc1: new high speed SDHC card at address 0007 [ 2.937103] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.944274] mmcblk1: p1 p2 [ 2.999694] hctosys: unable to open rtc device (rtc0) [ 3.001129] sr_init: No PMIC hook to init smartreflex [ 3.011718] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.020751] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.024749] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.038116] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.038543] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.041778] mmc2: new SDIO card at address 0001 [ 3.078521] vwl1271: disabling [ 3.103454] VAUX1_6030: disabling [ 3.111236] VDAC: disabling [ 3.115051] VANA: disabling [ 3.118865] VUSB: disabling [ 3.129669] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.141906] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.179565] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.189453] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 6.668518] EXT4-fs (mmcblk1p2): recovery complete [ 6.687988] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.696685] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 6.708892] devtmpfs: mounted [ 6.713165] Freeing unused kernel memory: 452K (c089d000 - c090e000) [ 7.021942] random: init urandom read with 30 bits of entropy available [ 7.045623] init: Failed to create pty - disabling logging for job [ 7.052246] init: Temporary process spawn error: No space left on device [ 7.104736] init: Failed to create pty - disabling logging for job [ 7.111358] init: Temporary process spawn error: No space left on device [ 7.132019] init: Failed to create pty - disabling logging for job [ 7.139038] init: Temporary process spawn error: No space left on device [ 7.150695] init: Failed to create pty - disabling logging for job [ 7.158843] init: Temporary process spawn error: No space left on device [ 7.247863] init: hwclock main process (84) terminated with status 1 [ 7.303070] init: ureadahead main process (85) terminated with status 5 [ 7.505889] init: Failed to create pty - disabling logging for job [ 7.513092] init: Temporary process spawn error: No space left on device [ 7.552276] init: Failed to create pty - disabling logging for job [ 7.560272] init: Temporary process spawn error: No space left on device [ 7.652130] init: Failed to create pty - disabling logging for job [ 7.659088] init: Temporary process spawn error: No space left on device [ 8.156402] udevd[140]: starting version 175 fsck from util-linux 2.20.1 [ 11.380432] init: udev-fallback-graphics main process (403) terminated with status 1 /dev/mmcblk1p2: clean, 177407/963584 files, 2990239/7708672 blocks [ 11.564147] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.652374] init: plymouth main process (86) killed by SEGV signal [ 11.665588] init: plymouth-splash main process (422) terminated with status 2 [ 11.847839] random: nonblocking pool is initialized mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.220886] init: plymouth-log main process (483) terminated with status 1 [ 12.266448] init: failsafe main process (486) killed by TERM signal [ 13.168548] init: plymouth-upstart-bridge main process (533) terminated with status 1 [ 13.237945] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 13.393188] init: bluetooth main process (542) terminated with status 1 [ 13.402374] init: bluetooth main process ended, respawning speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 14.039428] init: alsa-restore main process (577) terminated with status 19 [ 14.115203] init: hybrid-gfx main process (595) terminated with status 1 FATAL: Could not load /lib/modules/4.3.0-rc6-171283-g7379047/modules.dep: No such file or directory [ 14.766723] init: bluetooth main process (660) terminated with status 1 [ 14.776458] init: bluetooth main process ended, respawning [ 15.018157] init: bluetooth main process (695) terminated with status 1 [ 15.028625] init: bluetooth main process ended, respawning [ 15.199768] init: bluetooth main process (711) terminated with status 1 [ 15.206817] init: bluetooth main process ended, respawning [ 15.389129] init: bluetooth main process (727) terminated with status 1 [ 15.396148] init: bluetooth main process ended, respawning [ 15.683685] init: bluetooth main process (744) terminated with status 1 [ 15.691223] init: bluetooth main process ended, respawning [ 16.043182] init: bluetooth main process (763) terminated with status 1 [ 16.051147] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 16.511077] init: lightdm main process (631) terminated with status 1 [ 16.538543] init: bluetooth main process (795) terminated with status 1 [ 16.546508] init: bluetooth main process ended, respawning [ 16.741638] init: bluetooth main process (814) terminated with status 1 [ 16.749816] init: bluetooth main process ended, respawning [ 16.931213] init: bluetooth main process (830) terminated with status 1 [ 16.938659] init: bluetooth main process ended, respawning