U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 4(SOH)/3555(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00378cd9 = 3640537 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3640473 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-rc7-171561-g32b8819 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Oct 25 18:29:00 MDT 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c09c3b00, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67072 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @eee94000 s25088 r8192 d24064 u57344 [ 0.000000] pcpu-alloc: s25088 r8192 d24064 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259922 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001376K/1046528K available (6566K kernel code, 742K rwdata, 2224K rodata, 456K init, 8263K bss, 28768K reserved, 16384K cma-reserved, 251904K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc089db7c (8791 kB) [ 0.000000] .init : 0xc089e000 - 0xc0910000 ( 456 kB) [ 0.000000] .data : 0xc0910000 - 0xc09c9a98 ( 743 kB) [ 0.000000] .bss : 0xc09cc000 - 0xc11dde78 (8264 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002075] Console: colour dummy device 80x30 [ 0.002136] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002166] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002166] ... MAX_LOCK_DEPTH: 48 [ 0.002166] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002166] ... CLASSHASH_SIZE: 4096 [ 0.002197] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002197] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002197] ... CHAINHASH_SIZE: 32768 [ 0.002197] memory used by lock dependency info: 5167 kB [ 0.002227] per task-struct memory footprint: 1536 bytes [ 0.002258] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080261] pid_max: default: 32768 minimum: 301 [ 0.080657] Security Framework initialized [ 0.080810] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080841] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084167] Initializing cgroup subsys io [ 0.084289] Initializing cgroup subsys memory [ 0.084381] Initializing cgroup subsys devices [ 0.084472] Initializing cgroup subsys freezer [ 0.084625] Initializing cgroup subsys perf_event [ 0.084686] CPU: Testing write buffer coherency: ok [ 0.086151] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086242] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180267] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181030] Brought up 2 CPUs [ 0.181030] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181060] CPU: All CPU(s) started in SVC mode. [ 0.184539] devtmpfs: initialized [ 0.239776] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.244750] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.249237] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.429626] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.432006] pinctrl core: initialized pinctrl subsystem [ 0.437499] NET: Registered protocol family 16 [ 0.442810] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.470458] cpuidle: using governor ladder [ 0.500335] cpuidle: using governor menu [ 0.513885] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.514709] OMAP GPIO hardware version 0.1 [ 0.515960] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.517852] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.519683] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.521636] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.523498] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.544342] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.544860] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.552825] No ATAGs? [ 0.552917] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.552947] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.556213] OMAP DMA hardware revision 0.0 [ 0.615570] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.616638] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.617492] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.621917] SCSI subsystem initialized [ 0.622436] libata version 3.00 loaded. [ 0.623138] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.623687] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.623779] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.623870] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.624237] pps_core: LinuxPPS API ver. 1 registered [ 0.624267] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.624298] PTP clock support registered [ 0.628692] clocksource: Switched to clocksource 32k_counter [ 0.769531] NET: Registered protocol family 2 [ 0.771636] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.771850] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.774383] TCP: Hash tables configured (established 8192 bind 8192) [ 0.774719] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.775054] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.776153] NET: Registered protocol family 1 [ 0.777832] RPC: Registered named UNIX socket transport module. [ 0.777832] RPC: Registered udp transport module. [ 0.777832] RPC: Registered tcp transport module. [ 0.777862] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.783264] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.788848] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.789184] audit: initializing netlink subsys (disabled) [ 0.789428] audit: type=2000 audit(0.770:1): initialized [ 0.793182] VFS: Disk quotas dquot_6.6.0 [ 0.793487] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.796173] NFS: Registering the id_resolver key type [ 0.796691] Key type id_resolver registered [ 0.796691] Key type id_legacy registered [ 0.796936] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.802764] bounce: pool size: 64 pages [ 0.802886] io scheduler noop registered [ 0.802917] io scheduler deadline registered [ 0.802947] io scheduler cfq registered (default) [ 0.806579] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.807312] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.813690] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.819732] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.819763] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.820281] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.822113] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.822143] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.822387] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.823547] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.823547] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.823822] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.839538] console [ttyO2] enabled [ 1.876617] brd: module loaded [ 1.901794] loop: module loaded [ 1.908172] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.921936] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.932373] spi1.0 supply vdd-io not found, using dummy regulator [ 1.939239] spi1.0 supply vdd not found, using dummy regulator [ 1.945526] ks8851 spi1.0: message enable is 0 [ 1.956604] ks8851 spi1.0 eth0: revision 1, MAC ee:6e:4a:36:47:2c, IRQ 202, no EEPROM [ 1.969268] mousedev: PS/2 mouse device common for all mice [ 1.975097] i2c /dev entries driver [ 1.980377] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.986663] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.993530] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.003112] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.012634] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.019805] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.025939] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.032257] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.039093] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.048706] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.058166] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.065216] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.100799] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.107086] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.113983] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.123565] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.133056] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.140106] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.169128] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.175415] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.182342] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.192687] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.197540] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.203857] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.210723] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.220306] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.229797] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.236816] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.279724] ledtrig-cpu: registered to indicate activity on CPUs [ 2.287261] oprofile: using arm/armv7-ca9 [ 2.292388] Initializing XFRM netlink socket [ 2.297332] NET: Registered protocol family 10 [ 2.305206] sit: IPv6 over IPv4 tunneling driver [ 2.312347] NET: Registered protocol family 17 [ 2.317077] NET: Registered protocol family 15 [ 2.322174] Key type dns_resolver registered [ 2.326965] twl: not initialized [ 2.330383] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.338775] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.347167] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.355590] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.364013] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.372436] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.380828] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.389251] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.396453] omap2_set_init_voltage: unable to set vdd_mpu [ 2.402160] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.409484] omap2_set_init_voltage: unable to set vdd_core [ 2.415222] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.422454] omap2_set_init_voltage: unable to set vdd_iva [ 2.430450] Power Management for TI OMAP4+ devices. [ 2.435546] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.442932] ThumbEE CPU extension supported. [ 2.442932] Registering SWP/SWPB emulation handler [ 2.448577] SmartReflex Class3 initialized [ 2.463165] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.475067] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.482055] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.489196] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.499237] no flags found for reset [ 2.503021] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.510437] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.510498] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.527404] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.537170] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.544494] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.559906] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.559906] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.570037] twl 0-0048: PIH (irq 327) nested IRQs [ 2.582763] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.590393] mmc0: new high speed SDHC card at address b368 [ 2.599731] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.608856] mmcblk0: p1 p2 [ 2.618621] VUSIM: failed to get the current voltage(-22) [ 2.618682] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.636260] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.654571] twl6040 0-004b: clk32k is not handled [ 2.666442] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.680480] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.690856] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.698638] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.705200] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.705200] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.718383] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.727966] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.737457] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.744506] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.750640] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.756958] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.763793] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.773376] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.773406] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.789916] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.798614] hw-breakpoint: CPU 1 failed to disable vector catch [ 2.839569] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.846008] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.852874] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.862457] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.871948] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.876647] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.878997] mmc1: new high speed SDHC card at address 0007 [ 2.880462] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.882720] mmcblk1: p1 p2 [ 2.900726] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 3.020599] hctosys: unable to open rtc device (rtc0) [ 3.027252] sr_init: No PMIC hook to init smartreflex [ 3.027252] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.041534] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.050262] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.061279] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.084899] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.094848] mmc2: new SDIO card at address 0001 [ 3.102416] vwl1271: disabling [ 3.108398] VAUX1_6030: disabling [ 3.114837] VDAC: disabling [ 3.118743] VANA: disabling [ 3.122680] VUSB: disabling [ 3.133300] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.146453] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.183502] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.193511] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 7.553192] EXT4-fs (mmcblk1p2): recovery complete [ 7.569519] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.578124] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.590148] devtmpfs: mounted [ 7.594421] Freeing unused kernel memory: 456K (c089e000 - c0910000) [ 7.901245] random: init urandom read with 30 bits of entropy available [ 7.921844] init: Failed to create pty - disabling logging for job [ 7.930694] init: Temporary process spawn error: No space left on device [ 7.985534] init: Failed to create pty - disabling logging for job [ 7.992462] init: Temporary process spawn error: No space left on device [ 8.022125] init: Failed to create pty - disabling logging for job [ 8.028747] init: Temporary process spawn error: No space left on device [ 8.039306] init: Failed to create pty - disabling logging for job [ 8.047363] init: Temporary process spawn error: No space left on device [ 8.140777] init: hwclock main process (84) terminated with status 1 [ 8.190582] init: ureadahead main process (85) terminated with status 5 [ 8.390441] init: Failed to create pty - disabling logging for job [ 8.397155] init: Temporary process spawn error: No space left on device [ 8.437133] init: Failed to create pty - disabling logging for job [ 8.443969] init: Temporary process spawn error: No space left on device [ 8.536895] init: Failed to create pty - disabling logging for job [ 8.543884] init: Temporary process spawn error: No space left on device [ 9.034484] udevd[140]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177413/963584 files, 2990675/7708672 blocks [ 12.286651] init: udev-fallback-graphics main process (399) terminated with status 1 [ 12.470703] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 12.548553] random: nonblocking pool is initialized [ 12.567687] init: plymouth main process (86) killed by SEGV signal [ 12.584655] init: plymouth-splash main process (422) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth [ 13.135101] init: plymouth-log main process (489) terminated with status 1 [ 13.172821] init: failsafe main process (492) killed by TERM signal [ 13.979095] init: plymouth-upstart-bridge main process (538) terminated with status 1 [ 14.174072] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 14.799835] init: alsa-restore main process (575) terminated with status 19 [ 14.889160] init: bluetooth main process (547) terminated with status 1 [ 14.900024] init: bluetooth main process ended, respawning [ 14.970275] init: hybrid-gfx main process (591) terminated with status 1 FATAL: Could not load /lib/modules/4.3.0-rc7-171561-g32b8819/modules.dep: No such file or directory [ 15.797698] init: bluetooth main process (684) terminated with status 1 [ 15.804962] init: bluetooth main process ended, respawning [ 16.169250] init: bluetooth main process (702) terminated with status 1 [ 16.176788] init: bluetooth main process ended, respawning [ 16.362945] init: bluetooth main process (720) terminated with status 1 [ 16.370208] init: bluetooth main process ended, respawning [ 16.549194] init: bluetooth main process (736) terminated with status 1 [ 16.558807] init: bluetooth main process ended, respawning [ 17.015411] init: bluetooth main process (758) terminated with status 1 Ubuntu 12.04.1 LTS [ 17.026428] init: bluetooth main process ended, respawning variscite-desktop ttyO2 variscite-desktop login: