U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  2  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 3(SOH)/3554(STX)/0(CAN) packets, 3 retries ## Total Size = 0x00378829 = 3639337 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3639273 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-171744-g6a13feb (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Dec 13 17:33:52 MST 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c09c18c0, node_mem_map eeef9000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67072 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @eee94000 s25064 r8192 d24088 u57344 [ 0.000000] pcpu-alloc: s25064 r8192 d24088 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259922 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001384K/1046528K available (6566K kernel code, 742K rwdata, 2224K rodata, 448K init, 8263K bss, 28760K reserved, 16384K cma-reserved, 251904K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc089db58 (8791 kB) [ 0.000000] .init : 0xc089e000 - 0xc090e000 ( 448 kB) [ 0.000000] .data : 0xc090e000 - 0xc09c7858 ( 743 kB) [ 0.000000] .bss : 0xc09ca000 - 0xc11dbc38 (8264 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002105] Console: colour dummy device 80x30 [ 0.002166] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002166] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002166] ... MAX_LOCK_DEPTH: 48 [ 0.002197] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002197] ... CLASSHASH_SIZE: 4096 [ 0.002197] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002197] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002227] ... CHAINHASH_SIZE: 32768 [ 0.002227] memory used by lock dependency info: 5167 kB [ 0.002227] per task-struct memory footprint: 1536 bytes [ 0.002258] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.080352] pid_max: default: 32768 minimum: 301 [ 0.080749] Security Framework initialized [ 0.080871] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080902] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.084136] Initializing cgroup subsys io [ 0.084259] Initializing cgroup subsys memory [ 0.084350] Initializing cgroup subsys devices [ 0.084442] Initializing cgroup subsys freezer [ 0.084594] Initializing cgroup subsys perf_event [ 0.084655] CPU: Testing write buffer coherency: ok [ 0.086090] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.086181] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.180297] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.181030] Brought up 2 CPUs [ 0.181060] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.181060] CPU: All CPU(s) started in SVC mode. [ 0.184478] devtmpfs: initialized [ 0.241424] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.246520] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.251281] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.437286] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.439636] pinctrl core: initialized pinctrl subsystem [ 0.445037] NET: Registered protocol family 16 [ 0.450683] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.480499] cpuidle: using governor ladder [ 0.510345] cpuidle: using governor menu [ 0.524108] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.524963] OMAP GPIO hardware version 0.1 [ 0.526214] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.528198] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.530090] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.532043] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.533966] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.555297] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.555847] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.563964] No ATAGs? [ 0.564056] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.564056] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.567352] OMAP DMA hardware revision 0.0 [ 0.625671] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.626739] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.627624] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.631988] SCSI subsystem initialized [ 0.632507] libata version 3.00 loaded. [ 0.633239] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.633789] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.633880] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.633972] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.634338] pps_core: LinuxPPS API ver. 1 registered [ 0.634368] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.634429] PTP clock support registered [ 0.638702] clocksource: Switched to clocksource 32k_counter [ 0.781402] NET: Registered protocol family 2 [ 0.783599] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.783782] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.786315] TCP: Hash tables configured (established 8192 bind 8192) [ 0.786651] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.787017] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.788085] NET: Registered protocol family 1 [ 0.789855] RPC: Registered named UNIX socket transport module. [ 0.789855] RPC: Registered udp transport module. [ 0.789886] RPC: Registered tcp transport module. [ 0.789886] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.795227] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.800811] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.801116] audit: initializing netlink subsys (disabled) [ 0.801361] audit: type=2000 audit(0.780:1): initialized [ 0.805114] VFS: Disk quotas dquot_6.6.0 [ 0.805419] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.808074] NFS: Registering the id_resolver key type [ 0.808532] Key type id_resolver registered [ 0.808532] Key type id_legacy registered [ 0.808837] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.814239] bounce: pool size: 64 pages [ 0.814361] io scheduler noop registered [ 0.814361] io scheduler deadline registered [ 0.814422] io scheduler cfq registered (default) [ 0.818023] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.818878] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.825256] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.831420] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.831451] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.831939] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.833648] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.833679] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.833953] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.835052] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.835083] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.835357] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.851043] console [ttyO2] enabled [ 1.887847] brd: module loaded [ 1.912872] loop: module loaded [ 1.919311] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.932952] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.943389] spi1.0 supply vdd-io not found, using dummy regulator [ 1.950286] spi1.0 supply vdd not found, using dummy regulator [ 1.956542] ks8851 spi1.0: message enable is 0 [ 1.967559] ks8851 spi1.0 eth0: revision 1, MAC 72:e1:f3:44:3c:c5, IRQ 202, no EEPROM [ 1.980041] mousedev: PS/2 mouse device common for all mice [ 1.985900] i2c /dev entries driver [ 1.991119] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.997436] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.004302] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.013885] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.023406] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.030578] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.036682] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.042999] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.049865] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.059478] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.068969] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.075988] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.110626] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.116943] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.123809] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.133392] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.142913] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.149932] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.179138] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.185424] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.192352] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.202728] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.207580] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.213897] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.220733] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.230346] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.239837] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.246856] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.289886] ledtrig-cpu: registered to indicate activity on CPUs [ 2.297454] oprofile: using arm/armv7-ca9 [ 2.302520] Initializing XFRM netlink socket [ 2.307464] NET: Registered protocol family 10 [ 2.315246] sit: IPv6 over IPv4 tunneling driver [ 2.322387] NET: Registered protocol family 17 [ 2.327087] NET: Registered protocol family 15 [ 2.332183] Key type dns_resolver registered [ 2.336975] twl: not initialized [ 2.340393] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.348785] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.357208] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.365600] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.374053] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.382446] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.390869] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.399291] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.406494] omap2_set_init_voltage: unable to set vdd_mpu [ 2.412200] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.419494] omap2_set_init_voltage: unable to set vdd_core [ 2.425262] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.432495] omap2_set_init_voltage: unable to set vdd_iva [ 2.440460] Power Management for TI OMAP4+ devices. [ 2.445556] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.452941] ThumbEE CPU extension supported. [ 2.452941] Registering SWP/SWPB emulation handler [ 2.463592] SmartReflex Class3 initialized [ 2.473114] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.484710] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.491943] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.498687] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.509185] no flags found for reset [ 2.509429] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.520324] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.527435] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.537292] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.547088] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.548187] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.550292] mmc0: new high speed SDHC card at address b368 [ 2.552978] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.556610] mmcblk0: p1 p2 [ 2.573211] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.588897] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.608764] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.618774] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.626434] twl 0-0048: PIH (irq 327) nested IRQs [ 2.645782] VUSIM: failed to get the current voltage(-22) [ 2.655151] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.655151] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.685668] twl6040 0-004b: clk32k is not handled [ 2.693756] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.708618] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.716735] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.725189] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.731262] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.731964] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.745086] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.754669] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.754699] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.771209] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.771209] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.783630] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.790466] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.800048] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.809539] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.809570] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.859252] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.865509] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.872558] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.872558] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.891601] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.896697] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.899047] mmc1: new high speed SDHC card at address 0007 [ 2.900604] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.902709] mmcblk1: p1 p2 [ 2.920410] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 3.061126] hctosys: unable to open rtc device (rtc0) [ 3.063903] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.075012] sr_init: No PMIC hook to init smartreflex [ 3.077545] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.081237] mmc2: new SDIO card at address 0001 [ 3.091217] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.099822] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.108459] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.138610] vwl1271: disabling [ 3.163543] VAUX1_6030: disabling [ 3.169921] VDAC: disabling [ 3.173675] VANA: disabling [ 3.177429] VUSB: disabling [ 3.187316] EXT2-fs (mmcblk1p2): error: couldn't mount because of unsupported optional features (244) [ 3.200256] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.234954] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.244812] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 7.224853] EXT4-fs (mmcblk1p2): recovery complete [ 7.238525] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.247253] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.259796] devtmpfs: mounted [ 7.261779] Freeing unused kernel memory: 448K (c089e000 - c090e000) [ 7.568756] random: init urandom read with 31 bits of entropy available [ 7.591400] init: Failed to create pty - disabling logging for job [ 7.598144] init: Temporary process spawn error: No space left on device [ 7.649658] init: Failed to create pty - disabling logging for job [ 7.655578] init: Temporary process spawn error: No space left on device [ 7.676971] init: Failed to create pty - disabling logging for job [ 7.683929] init: Temporary process spawn error: No space left on device [ 7.694610] init: Failed to create pty - disabling logging for job [ 7.702697] init: Temporary process spawn error: No space left on device [ 7.797027] init: hwclock main process (83) terminated with status 1 [ 7.840972] init: ureadahead main process (84) terminated with status 5 [ 8.037658] init: Failed to create pty - disabling logging for job [ 8.044616] init: Temporary process spawn error: No space left on device [ 8.084259] init: Failed to create pty - disabling logging for job [ 8.091003] init: Temporary process spawn error: No space left on device [ 8.183807] init: Failed to create pty - disabling logging for job [ 8.190765] init: Temporary process spawn error: No space left on device [ 8.652130] udevd[140]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177415/963584 files, 2990799/7708672 blocks [ 11.860076] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.881591] init: udev-fallback-graphics main process (398) terminated with status 1 [ 12.166076] init: plymouth-splash main process (416) terminated with status 2 [ 12.181854] init: plymouth main process (86) killed by SEGV signal [ 12.406372] random: nonblocking pool is initialized mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.747344] init: plymouth-log main process (485) terminated with status 1 [ 12.778503] init: failsafe main process (487) killed by TERM signal [ 13.565155] init: plymouth-upstart-bridge main process (531) terminated with status 1 [ 13.779418] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 14.389862] init: bluetooth main process (542) terminated with status 1 [ 14.392303] init: bluetooth main process ended, respawning [ 14.511260] init: alsa-restore main process (579) terminated with status 19 FATAL: Could not load /lib/modules/4.3.0-171744-g6a13feb/modules.dep: No such file or directory [ 14.624755] init: hybrid-gfx main process (598) terminated with status 1 [ 15.557373] init: bluetooth main process (669) terminated with status 1 [ 15.568603] init: bluetooth main process ended, respawning [ 15.886108] init: bluetooth main process (695) terminated with status 1 [ 15.894073] init: bluetooth main process ended, respawning [ 16.243652] init: bluetooth main process (714) terminated with status 1 [ 16.253479] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 16.703277] init: bluetooth main process (737) terminated with status 1 [ 16.716979] init: bluetooth main process ended, respawning [ 16.960418] init: bluetooth main process (763) terminated with status 1 [ 16.967956] init: bluetooth main process ended, respawning