U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete em - CRC mode, 5(SOH)/3577(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0037e509 = 3663113 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3663049 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-rc1-183970-g8005c49 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sat Dec 19 21:17:29 MST 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c09d2940, node_mem_map ef6f9000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef696000 s24936 r8192 d24216 u57344 [ 0.000000] pcpu-alloc: s24936 r8192 d24216 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259904 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001324K/1046528K available (6611K kernel code, 746K rwdata, 2240K rodata, 452K init, 8263K bss, 28820K reserved, 16384K cma-reserved, 243712K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08acf44 (8852 kB) [ 0.000000] .init : 0xc08ad000 - 0xc091e000 ( 452 kB) [ 0.000000] .data : 0xc091e000 - 0xc09d8918 ( 747 kB) [ 0.000000] .bss : 0xc09db000 - 0xc11ecc70 (8264 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001403] Console: colour dummy device 80x30 [ 0.001464] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001464] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001495] ... MAX_LOCK_DEPTH: 48 [ 0.001495] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001495] ... CLASSHASH_SIZE: 4096 [ 0.001525] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001525] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001525] ... CHAINHASH_SIZE: 32768 [ 0.001525] memory used by lock dependency info: 5167 kB [ 0.001556] per task-struct memory footprint: 1536 bytes [ 0.001556] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.079406] pid_max: default: 32768 minimum: 301 [ 0.079772] Security Framework initialized [ 0.079925] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079925] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083038] Initializing cgroup subsys io [ 0.083129] Initializing cgroup subsys memory [ 0.083221] Initializing cgroup subsys devices [ 0.083312] Initializing cgroup subsys freezer [ 0.083435] Initializing cgroup subsys perf_event [ 0.083496] CPU: Testing write buffer coherency: ok [ 0.084777] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.084899] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.179351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.179992] Brought up 2 CPUs [ 0.180023] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.180023] CPU: All CPU(s) started in SVC mode. [ 0.183044] devtmpfs: initialized [ 0.239166] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.244140] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.248718] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.430969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.433258] pinctrl core: initialized pinctrl subsystem [ 0.438140] NET: Registered protocol family 16 [ 0.443389] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.469512] cpuidle: using governor ladder [ 0.499420] cpuidle: using governor menu [ 0.513305] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.514556] OMAP GPIO hardware version 0.1 [ 0.515777] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.517974] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.520141] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.522247] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.524383] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.545593] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.546142] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.554138] No ATAGs? [ 0.554229] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.554260] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.556793] OMAP DMA hardware revision 0.0 [ 0.614288] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.615844] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.616668] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.620880] SCSI subsystem initialized [ 0.621398] libata version 3.00 loaded. [ 0.622100] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.622650] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.622741] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.622833] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.623199] pps_core: LinuxPPS API ver. 1 registered [ 0.623229] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.623260] PTP clock support registered [ 0.627258] clocksource: Switched to clocksource 32k_counter [ 0.766265] NET: Registered protocol family 2 [ 0.768432] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.768615] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.771148] TCP: Hash tables configured (established 8192 bind 8192) [ 0.771453] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.771789] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.772888] NET: Registered protocol family 1 [ 0.774353] RPC: Registered named UNIX socket transport module. [ 0.774353] RPC: Registered udp transport module. [ 0.774383] RPC: Registered tcp transport module. [ 0.774383] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.779663] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.784942] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.785278] audit: initializing netlink subsys (disabled) [ 0.785491] audit: type=2000 audit(0.760:1): initialized [ 0.789245] VFS: Disk quotas dquot_6.6.0 [ 0.789489] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.791687] NFS: Registering the id_resolver key type [ 0.792053] Key type id_resolver registered [ 0.792053] Key type id_legacy registered [ 0.792266] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.797363] bounce: pool size: 64 pages [ 0.797485] io scheduler noop registered [ 0.797515] io scheduler deadline registered [ 0.797576] io scheduler cfq registered (default) [ 0.801086] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.801849] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.808349] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.813964] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.813995] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.814422] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.815979] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.815979] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.816253] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.817443] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.817443] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.817718] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.834594] console [ttyO2] enabled [ 1.871154] brd: module loaded [ 1.895080] loop: module loaded [ 1.901306] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.914916] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.925354] spi1.0 supply vdd-io not found, using dummy regulator [ 1.932159] spi1.0 supply vdd not found, using dummy regulator [ 1.938507] ks8851 spi1.0: message enable is 0 [ 1.948791] ks8851 spi1.0 eth0: set_features() failed (-1); wanted 0x0000000000004000, left 0x0000000000004800 [ 1.959533] ks8851 spi1.0 eth0: revision 1, MAC da:dc:69:ec:f7:d0, IRQ 202, no EEPROM [ 1.972442] mousedev: PS/2 mouse device common for all mice [ 1.978332] i2c /dev entries driver [ 1.983428] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.989776] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.996612] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.006225] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.015716] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.022888] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.029022] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.035308] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.042205] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.051788] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.061309] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.068359] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.098907] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.105224] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.112091] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.121704] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.131195] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.138244] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.177734] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.184020] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.190948] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.201324] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.206176] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.212493] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.219360] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.228973] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.238464] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.245483] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.288085] ledtrig-cpu: registered to indicate activity on CPUs [ 2.295593] oprofile: using arm/armv7-ca9 [ 2.300659] Initializing XFRM netlink socket [ 2.305572] NET: Registered protocol family 10 [ 2.313171] sit: IPv6 over IPv4 tunneling driver [ 2.320129] NET: Registered protocol family 17 [ 2.324859] NET: Registered protocol family 15 [ 2.329864] Key type dns_resolver registered [ 2.334686] twl: not initialized [ 2.338104] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.346466] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.354919] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.363342] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.371765] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.380157] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.388580] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.397003] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.404235] omap2_set_init_voltage: unable to set vdd_mpu [ 2.409912] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.417236] omap2_set_init_voltage: unable to set vdd_core [ 2.423004] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.430236] omap2_set_init_voltage: unable to set vdd_iva [ 2.438018] Power Management for TI OMAP4+ devices. [ 2.443145] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.450378] ThumbEE CPU extension supported. [ 2.456085] Registering SWP/SWPB emulation handler [ 2.461151] SmartReflex Class3 initialized [ 2.470245] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.481872] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.489135] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.489135] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.506317] no flags found for reset [ 2.510101] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.517517] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.517517] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.534515] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.535400] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.537414] mmc0: new high speed SDHC card at address b368 [ 2.539947] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.543395] mmcblk0: p1 p2 [ 2.558471] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.573333] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.587280] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.608489] twl 0-0048: PIH (irq 327) nested IRQs [ 2.627838] VUSIM: failed to get the current voltage(-22) [ 2.627838] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.644805] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.661773] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.673919] twl6040 0-004b: clk32k is not handled [ 2.681976] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.695892] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.704620] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.713256] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.719329] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.726318] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.733184] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.742797] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.742797] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.759307] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.765441] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.765441] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.778594] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.788177] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.797668] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.797698] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.847839] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.854125] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.861175] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.870758] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.880249] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.885223] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.887542] mmc1: new high speed SDHC card at address 0007 [ 2.889038] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.891235] mmcblk1: p1 p2 [ 2.909027] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.927368] hw-breakpoint: CPU 0 failed to disable vector catch [ 3.028778] hctosys: unable to open rtc device (rtc0) [ 3.032165] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.042633] sr_init: No PMIC hook to init smartreflex [ 3.045806] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.049224] mmc2: new SDIO card at address 0001 [ 3.057312] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.067382] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.076049] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.125274] vwl1271: disabling [ 3.129699] VAUX1_6030: disabling [ 3.136169] VDAC: disabling [ 3.140014] VANA: disabling [ 3.143798] VUSB: disabling [ 3.153411] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.194335] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.202026] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 6.648986] EXT4-fs (mmcblk1p2): recovery complete [ 6.668273] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.668273] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 6.690765] devtmpfs: mounted [ 6.694915] Freeing unused kernel memory: 452K (c08ad000 - c091e000) [ 6.998809] random: init urandom read with 30 bits of entropy available [ 7.018859] init: Failed to create pty - disabling logging for job [ 7.027862] init: Temporary process spawn error: No space left on device [ 7.078918] init: Failed to create pty - disabling logging for job [ 7.085021] init: Temporary process spawn error: No space left on device [ 7.105041] init: Failed to create pty - disabling logging for job [ 7.112274] init: Temporary process spawn error: No space left on device [ 7.122497] init: Failed to create pty - disabling logging for job [ 7.130584] init: Temporary process spawn error: No space left on device [ 7.218719] init: hwclock main process (83) terminated with status 1 [ 7.269378] init: ureadahead main process (84) terminated with status 5 [ 7.467803] init: Failed to create pty - disabling logging for job [ 7.467803] init: Temporary process spawn error: No space left on device [ 7.514953] init: Failed to create pty - disabling logging for job [ 7.523132] init: Temporary process spawn error: No space left on device [ 7.614746] init: Failed to create pty - disabling logging for job [ 7.621459] init: Temporary process spawn error: No space left on device [ 8.109436] udevd[140]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177419/963584 files, 2991066/7708672 blocks [ 11.353912] init: udev-fallback-graphics main process (405) terminated with status 1 [ 11.522308] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.553588] random: nonblocking pool is initialized [ 11.648437] init: plymouth-splash main process (422) terminated with status 2 [ 11.677276] init: plymouth main process (86) killed by SEGV signal mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.178680] init: plymouth-log main process (492) terminated with status 1 [ 12.232238] init: failsafe main process (493) killed by TERM signal [ 12.961242] init: plymouth-upstart-bridge main process (533) terminated with status 1 [ 13.244506] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 13.843780] init: bluetooth main process (542) terminated with status 1 [ 13.862670] init: bluetooth main process ended, respawning [ 13.938476] init: alsa-restore main process (587) terminated with status 19 [ 13.948760] init: hybrid-gfx main process (603) terminated with status 1 FATAL: Could not load /lib/modules/4.4.0-rc1-183970-g8005c49/modules.dep: No such file or directory [ 14.717742] init: bluetooth main process (669) terminated with status 1 [ 14.726593] init: bluetooth main process ended, respawning [ 15.005615] init: bluetooth main process (705) terminated with status 1 [ 15.012878] init: bluetooth main process ended, respawning [ 15.182800] init: bluetooth main process (721) terminated with status 1 [ 15.192474] init: bluetooth main process ended, respawning [ 15.365814] init: bluetooth main process (738) terminated with status 1 [ 15.375823] init: bluetooth main process ended, respawning [ 15.711883] init: bluetooth main process (755) terminated with status 1 [ 15.721405] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: