U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  2  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 3(SOH)/3577(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0037e449 = 3662921 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3662857 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-rc3 (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Dec 20 15:47:57 MST 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c09d2ac0, node_mem_map ef6f9000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef696000 s24936 r8192 d24216 u57344 [ 0.000000] pcpu-alloc: s24936 r8192 d24216 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259904 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001324K/1046528K available (6611K kernel code, 746K rwdata, 2240K rodata, 452K init, 8263K bss, 28820K reserved, 16384K cma-reserved, 243712K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08acf58 (8852 kB) [ 0.000000] .init : 0xc08ad000 - 0xc091e000 ( 452 kB) [ 0.000000] .data : 0xc091e000 - 0xc09d8a98 ( 747 kB) [ 0.000000] .bss : 0xc09db000 - 0xc11ecc70 (8264 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001403] Console: colour dummy device 80x30 [ 0.001464] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001464] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001464] ... MAX_LOCK_DEPTH: 48 [ 0.001464] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001495] ... CLASSHASH_SIZE: 4096 [ 0.001495] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001495] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001495] ... CHAINHASH_SIZE: 32768 [ 0.001525] memory used by lock dependency info: 5167 kB [ 0.001525] per task-struct memory footprint: 1536 bytes [ 0.001556] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.079406] pid_max: default: 32768 minimum: 301 [ 0.079772] Security Framework initialized [ 0.079925] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079925] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083038] Initializing cgroup subsys io [ 0.083129] Initializing cgroup subsys memory [ 0.083221] Initializing cgroup subsys devices [ 0.083312] Initializing cgroup subsys freezer [ 0.083435] Initializing cgroup subsys perf_event [ 0.083496] CPU: Testing write buffer coherency: ok [ 0.084777] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.084869] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.179351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.179992] Brought up 2 CPUs [ 0.180023] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.180023] CPU: All CPU(s) started in SVC mode. [ 0.183074] devtmpfs: initialized [ 0.238098] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.243011] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.247497] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.427276] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.429626] pinctrl core: initialized pinctrl subsystem [ 0.434509] NET: Registered protocol family 16 [ 0.439849] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.469512] cpuidle: using governor ladder [ 0.499420] cpuidle: using governor menu [ 0.513061] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.514312] OMAP GPIO hardware version 0.1 [ 0.515533] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.517700] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.519866] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.521972] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.524108] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.544982] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.545501] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.553405] No ATAGs? [ 0.553497] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.553527] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.556030] OMAP DMA hardware revision 0.0 [ 0.614135] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.615661] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.616516] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.620788] SCSI subsystem initialized [ 0.621307] libata version 3.00 loaded. [ 0.621978] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.622528] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.622619] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.622711] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.623046] pps_core: LinuxPPS API ver. 1 registered [ 0.623077] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.623138] PTP clock support registered [ 0.627044] clocksource: Switched to clocksource 32k_counter [ 0.764068] NET: Registered protocol family 2 [ 0.766082] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.766265] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.768920] TCP: Hash tables configured (established 8192 bind 8192) [ 0.769195] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.769561] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.770660] NET: Registered protocol family 1 [ 0.772094] RPC: Registered named UNIX socket transport module. [ 0.772125] RPC: Registered udp transport module. [ 0.772125] RPC: Registered tcp transport module. [ 0.772125] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.777374] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.782653] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.782989] audit: initializing netlink subsys (disabled) [ 0.783203] audit: type=2000 audit(0.760:1): initialized [ 0.786682] VFS: Disk quotas dquot_6.6.0 [ 0.786956] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.789520] NFS: Registering the id_resolver key type [ 0.789886] Key type id_resolver registered [ 0.789916] Key type id_legacy registered [ 0.790100] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.794677] bounce: pool size: 64 pages [ 0.794799] io scheduler noop registered [ 0.794830] io scheduler deadline registered [ 0.794860] io scheduler cfq registered (default) [ 0.798400] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.799133] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.805541] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.811401] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.811431] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.811889] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.813537] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.813537] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.813812] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.814941] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.814971] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.815216] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.829620] console [ttyO2] enabled [ 1.865875] brd: module loaded [ 1.889556] loop: module loaded [ 1.895782] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.909454] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.919921] spi1.0 supply vdd-io not found, using dummy regulator [ 1.926696] spi1.0 supply vdd not found, using dummy regulator [ 1.932983] ks8851 spi1.0: message enable is 0 [ 1.943572] ks8851 spi1.0 eth0: revision 1, MAC 26:b7:48:5c:35:15, IRQ 202, no EEPROM [ 1.956329] mousedev: PS/2 mouse device common for all mice [ 1.962219] i2c /dev entries driver [ 1.967346] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.973663] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.980529] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.990112] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.999603] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.006744] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.012878] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.019195] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.026031] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.035644] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.045135] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.052154] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.088714] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.095001] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.101867] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.111480] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.120971] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.127990] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.157531] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.163818] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.170745] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.181121] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.185943] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.192260] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.199127] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.208709] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.218200] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.225219] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.267974] ledtrig-cpu: registered to indicate activity on CPUs [ 2.275482] oprofile: using arm/armv7-ca9 [ 2.280639] Initializing XFRM netlink socket [ 2.285583] NET: Registered protocol family 10 [ 2.293151] sit: IPv6 over IPv4 tunneling driver [ 2.300109] NET: Registered protocol family 17 [ 2.304840] NET: Registered protocol family 15 [ 2.309844] Key type dns_resolver registered [ 2.314636] twl: not initialized [ 2.318054] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.326416] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.334869] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.343261] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.351684] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.360107] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.368499] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.376922] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.384124] omap2_set_init_voltage: unable to set vdd_mpu [ 2.389831] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.397155] omap2_set_init_voltage: unable to set vdd_core [ 2.402923] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.410125] omap2_set_init_voltage: unable to set vdd_iva [ 2.417938] Power Management for TI OMAP4+ devices. [ 2.423034] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.431457] ThumbEE CPU extension supported. [ 2.431457] Registering SWP/SWPB emulation handler [ 2.441040] SmartReflex Class3 initialized [ 2.449981] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.461547] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.468811] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.468811] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.486022] no flags found for reset [ 2.489807] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.489807] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.504333] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.514190] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.523956] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.531280] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.537994] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.539916] mmc0: new high speed SDHC card at address b368 [ 2.542572] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.545562] mmcblk0: p1 p2 [ 2.567443] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.588409] twl 0-0048: PIH (irq 327) nested IRQs [ 2.608764] VUSIM: failed to get the current voltage(-22) [ 2.617828] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.617828] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.644226] twl6040 0-004b: clk32k is not handled [ 2.655792] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.669647] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.678436] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.687042] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.687042] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.687042] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.687042] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.716430] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.725952] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.733001] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.739135] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.745452] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.752288] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.761901] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.771392] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.771423] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.837677] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.843933] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.850982] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.860565] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.870056] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.877105] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.885040] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.895812] mmc1: new high speed SDHC card at address 0007 [ 2.903350] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.910675] mmcblk1: p1 p2 [ 3.019134] hctosys: unable to open rtc device (rtc0) [ 3.021911] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.033081] sr_init: No PMIC hook to init smartreflex [ 3.035552] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.039093] mmc2: new SDIO card at address 0001 [ 3.049285] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.057952] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.066619] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.097015] vwl1271: disabling [ 3.120025] VAUX1_6030: disabling [ 3.126617] VDAC: disabling [ 3.130432] VANA: disabling [ 3.134185] VUSB: disabling [ 3.143737] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.183105] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.183105] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 3.202667] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 3.211486] hw-breakpoint: CPU 0 failed to disable vector catch [ 7.557037] EXT4-fs (mmcblk1p2): recovery complete [ 7.578948] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.578948] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.599365] devtmpfs: mounted [ 7.603515] Freeing unused kernel memory: 452K (c08ad000 - c091e000) [ 7.909149] random: init urandom read with 31 bits of entropy available [ 7.931640] init: Failed to create pty - disabling logging for job [ 7.938140] init: Temporary process spawn error: No space left on device [ 7.989196] init: Failed to create pty - disabling logging for job [ 7.995910] init: Temporary process spawn error: No space left on device [ 8.024658] init: Failed to create pty - disabling logging for job [ 8.031402] init: Temporary process spawn error: No space left on device [ 8.042602] init: Failed to create pty - disabling logging for job [ 8.050201] init: Temporary process spawn error: No space left on device [ 8.134307] init: hwclock main process (84) terminated with status 1 [ 8.188964] init: ureadahead main process (85) terminated with status 5 [ 8.396118] init: Failed to create pty - disabling logging for job [ 8.402832] init: Temporary process spawn error: No space left on device [ 8.442993] init: Failed to create pty - disabling logging for job [ 8.449768] init: Temporary process spawn error: No space left on device [ 8.541381] init: Failed to create pty - disabling logging for job [ 8.548187] init: Temporary process spawn error: No space left on device [ 9.054351] udevd[140]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177424/963584 files, 2991333/7708672 blocks [ 12.165893] init: udev-fallback-graphics main process (395) terminated with status 1 [ 12.336700] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 12.402496] random: nonblocking pool is initialized [ 12.448699] init: plymouth main process (86) killed by SEGV signal [ 12.465972] init: plymouth-splash main process (405) terminated with status 2 mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 13.104064] init: plymouth-log main process (490) terminated with status 1 [ 13.142456] init: failsafe main process (491) killed by TERM signal [ 13.960449] init: plymouth-upstart-bridge main process (540) terminated with status 1 [ 14.127197] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 14.680847] init: bluetooth main process (546) terminated with status 1 [ 14.707183] init: bluetooth main process ended, respawning [ 14.806457] init: alsa-restore main process (578) terminated with status 19 [ 14.865020] init: hybrid-gfx main process (596) terminated with status 1 FATAL: Could not load /lib/modules/4.4.0-rc3/modules.dep: No such file or directory [ 15.524444] init: bluetooth main process (669) terminated with status 1 [ 15.537445] init: bluetooth main process ended, respawning [ 15.793151] init: bluetooth main process (697) terminated with status 1 [ 15.801422] init: bluetooth main process ended, respawning [ 15.977325] init: bluetooth main process (714) terminated with status 1 [ 15.984344] init: bluetooth main process ended, respawning [ 16.190093] init: bluetooth main process (730) terminated with status 1 [ 16.203216] init: bluetooth main process ended, respawning [ 16.479858] init: bluetooth main process (750) terminated with status 1 [ 16.495635] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 [ 16.855834] init: bluetooth main process (767) terminated with status 1 variscite-desktop login: [ 16.877624] init: bluetooth main process ended, respawning