Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# # done Bytes transferred = 3665777 (37ef71 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3665713 Bytes = 3.5 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-rc3 (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Dec 20 15:47:57 MST 2015 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65024 [ 0.000000] free_area_init_node: node 0, pgdat c09d2ac0, node_mem_map cfbb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65024 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 14 pages/cpu @cfb3c000 s24936 r8192 d24216 u57344 [ 0.000000] pcpu-alloc: s24936 r8192 d24216 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64448 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 222284K/260096K available (6611K kernel code, 746K rwdata, 2240K rodata, 452K init, 8263K bss, 21428K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08acf58 (8852 kB) [ 0.000000] .init : 0xc08ad000 - 0xc091e000 ( 452 kB) [ 0.000000] .data : 0xc091e000 - 0xc09d8a98 ( 747 kB) [ 0.000000] .bss : 0xc09db000 - 0xc11ecc70 (8264 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000034] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000078] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000187] OMAP clocksource: timer1 at 13000000 Hz [ 0.001693] Console: colour dummy device 80x30 [ 0.001790] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001808] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001822] ... MAX_LOCK_DEPTH: 48 [ 0.001836] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001850] ... CLASSHASH_SIZE: 4096 [ 0.001864] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001878] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001892] ... CHAINHASH_SIZE: 32768 [ 0.001906] memory used by lock dependency info: 5167 kB [ 0.001921] per task-struct memory footprint: 1536 bytes [ 0.001966] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.095782] pid_max: default: 32768 minimum: 301 [ 0.096433] Security Framework initialized [ 0.096669] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096696] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101935] Initializing cgroup subsys io [ 0.102106] Initializing cgroup subsys memory [ 0.102238] Initializing cgroup subsys devices [ 0.102387] Initializing cgroup subsys freezer [ 0.102599] Initializing cgroup subsys perf_event [ 0.102719] CPU: Testing write buffer coherency: ok [ 0.105073] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.105285] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.111907] Brought up 1 CPUs [ 0.111946] SMP: Total of 1 processors activated (597.60 BogoMIPS). [ 0.111965] CPU: All CPU(s) started in SVC mode. [ 0.118940] devtmpfs: initialized [ 0.242092] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.321697] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.323936] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.420500] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.424111] pinctrl core: initialized pinctrl subsystem [ 0.433156] NET: Registered protocol family 16 [ 0.443325] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.447133] cpuidle: using governor ladder [ 0.447185] cpuidle: using governor menu [ 0.448140] Reprogramming SDRC clock to 332000000 Hz [ 0.452493] In-band Error seen by USB_OTG at address 0 [ 0.452524] ------------[ cut here ]------------ [ 0.452566] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.452584] Modules linked in: [ 0.452618] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc3 #1 [ 0.452635] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.452695] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.452733] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.452773] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.452803] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.452831] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.452863] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x200) [ 0.452889] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x38/0x5c) [ 0.452917] [] (handle_irq_event) from [] (handle_level_irq+0xc0/0x150) [ 0.452945] [] (handle_level_irq) from [] (generic_handle_irq+0x18/0x28) [ 0.452970] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.453005] [] (__handle_domain_irq) from [] (__irq_svc+0x58/0x78) [ 0.453034] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.453061] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x450/0x5d0) [ 0.453087] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x160) [ 0.453115] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe0/0x164) [ 0.453153] [] (omap3_l3_probe) from [] (platform_drv_probe+0x50/0xac) [ 0.453185] [] (platform_drv_probe) from [] (driver_probe_device+0x1dc/0x2a8) [ 0.453215] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.453242] [] (bus_for_each_drv) from [] (__device_attach+0xa4/0x108) [ 0.453268] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 0.453294] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.453329] [] (device_add) from [] (of_platform_device_create_pdata+0x80/0xbc) [ 0.453358] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.453386] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.453419] [] (of_platform_populate) from [] (pdata_quirks_init+0x54/0x74) [ 0.453447] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.453482] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.453510] [] (customize_machine) from [] (do_one_initcall+0x80/0x1dc) [ 0.453542] [] (do_one_initcall) from [] (kernel_init_freeable+0x208/0x2e4) [ 0.453583] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.453613] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.453788] ---[ end trace 4b386fd758c66f58 ]--- [ 0.459524] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.467244] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.469742] OMAP GPIO hardware version 2.5 [ 0.472219] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.476284] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.480118] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.483971] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.487986] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.506423] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.507407] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.520502] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.520849] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.524219] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.690678] No ATAGs? [ 0.690730] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.692904] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.692947] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.695020] OMAP DMA hardware revision 4.0 [ 0.754965] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.757874] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.759373] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.760614] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.761846] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.763143] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.763450] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.764721] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.765007] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.766409] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.773898] SCSI subsystem initialized [ 0.775218] libata version 3.00 loaded. [ 0.776685] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.776852] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.777756] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.781149] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.781506] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.782263] pps_core: LinuxPPS API ver. 1 registered [ 0.782288] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.782394] PTP clock support registered [ 0.789835] clocksource: Switched to clocksource timer1 [ 1.040900] NET: Registered protocol family 2 [ 1.044240] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.044346] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.045486] TCP: Hash tables configured (established 2048 bind 2048) [ 1.045832] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.046156] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.047959] NET: Registered protocol family 1 [ 1.050939] RPC: Registered named UNIX socket transport module. [ 1.050980] RPC: Registered udp transport module. [ 1.051001] RPC: Registered tcp transport module. [ 1.051020] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.059103] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.069292] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.069966] audit: initializing netlink subsys (disabled) [ 1.070404] audit: type=2000 audit(1.070:1): initialized [ 1.077917] VFS: Disk quotas dquot_6.6.0 [ 1.078162] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.082993] NFS: Registering the id_resolver key type [ 1.083655] Key type id_resolver registered [ 1.083687] Key type id_legacy registered [ 1.084012] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.093893] io scheduler noop registered [ 1.093948] io scheduler deadline registered [ 1.094039] io scheduler cfq registered (default) [ 1.098644] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.099872] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.101036] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36 [ 1.108474] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.119400] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.120407] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.121075] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.124586] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.124636] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.125224] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.127526] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.127571] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.128076] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.523034] console [ttyO2] enabled [ 2.597061] brd: module loaded [ 2.639763] loop: module loaded [ 2.648159] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.657383] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.664180] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.669022] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.677065] NAND 512MiB 3,3V 8-bit: 'partitions' subnode not found on /ocp/gpmc@6e000000/nand@0,0. Trying to parse direct subnodes as partitions. [ 2.690901] 5 ofpart partitions found on MTD device NAND 512MiB 3,3V 8-bit [ 2.698098] Creating 5 MTD partitions on "NAND 512MiB 3,3V 8-bit": [ 2.704635] 0x000000000000-0x000000080000 : "xloader" [ 2.720651] 0x000000080000-0x000000260000 : "uboot" [ 2.734087] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.747106] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.762187] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.279385] libphy: smsc911x-mdio: probed [ 3.284380] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.296862] smsc911x 2d000000.ethernet eth0: MAC Address: 76:a9:19:04:15:b3 [ 3.349550] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.356041] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.366393] libphy: davinci_mdio.0: probed [ 3.370907] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.379548] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.394388] mousedev: PS/2 mouse device common for all mice [ 3.400442] i2c /dev entries driver [ 3.409233] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.415856] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.422935] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.433331] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.438185] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.444537] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.451484] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.461850] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.511293] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.517607] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.524588] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.534208] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.543725] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.551138] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.561691] ledtrig-cpu: registered to indicate activity on CPUs [ 3.570601] oprofile: using arm/armv7 [ 3.575755] Initializing XFRM netlink socket [ 3.581134] NET: Registered protocol family 10 [ 3.592983] sit: IPv6 over IPv4 tunneling driver [ 3.602006] NET: Registered protocol family 17 [ 3.606821] NET: Registered protocol family 15 [ 3.612277] Key type dns_resolver registered [ 3.617208] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.624890] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.631014] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.638301] omap2_set_init_voltage: unable to set vdd_core [ 3.645956] PM: no software I/O chain control; some wakeups may be lost [ 3.653082] pm: Failed to request pm_wkup irq [ 3.657738] ThumbEE CPU extension supported. [ 3.662349] Registering SWP/SWPB emulation handler [ 3.667402] SmartReflex Class3 initialized [ 3.690717] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.702957] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.714254] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.721216] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.728424] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.738557] no flags found for reset [ 3.742390] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.749834] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.756954] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.766849] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.776641] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.784020] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.793002] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.800001] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.807225] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.817340] no flags found for reset [ 3.821166] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.828541] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.835715] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.845606] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.855398] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.862747] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.877032] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.888029] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.895471] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.901917] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.908769] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.918394] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.927913] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.934997] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.956521] mmc0: new high speed SDHC card at address b368 [ 3.966864] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 3.978578] mmcblk0: p1 p2 [ 4.013351] davinci_emac davinci_emac.0: using random MAC addr: f6:4d:b0:fb:c3:8f [ 4.025534] hctosys: unable to open rtc device (rtc0) [ 4.030996] sr_init: No PMIC hook to init smartreflex [ 4.037535] sr_init: platform driver register failed for SR [ 4.124513] hsusb1_vbus: disabling [ 4.128134] hsusb2_vbus: disabling [ 4.131846] ads7846-reg: disabling [ 4.152393] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 4.187517] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 4.195967] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.219959] devtmpfs: mounted [ 4.224626] Freeing unused kernel memory: 452K (c08ad000 - c091e000) /bin/sh: can't access tty; job control turned off # # #