$ ÿNOLO X-Loader (v1.1.16, Oct 31 2008) Secondary image size 99036 Booting secondary Nokia OMAP Loader v1.1.16 (Oct 31 2008) running on Nokia N800 F5 (RX-34) Clocks: Core: 658 MHz L3: 109 MHz L4: 109 MHz MPU: 329 MHz DSP: 219 MHz IVA: 109 MHz I2C v3.4 Menelaus v2.2 found Vilma v1.5 found Betty v2.1 found Reset reason: pwr_key System DMA v2.0 OneNAND blocks unlocked in 30263 us Flash id: ec4811 Partition table successfully read McSPI v1.4 RFBI version 1.0 Detecting LCD panel lph8923 Panel ID: 838f48 URAL panel detected Detected LCD panel: ls041y3 S1D13745 Hailstorm detected FB memory blanking took 242 ms (3089 kB/s) Logo drawn in 24 ms (1218 kB/s) Über-cool backlight fade-in took 101 ms Initializing USB USB host detected Entering USB loop SETUP: RD STD DEVICE GET_DESCRIPTOR DEVICE (value 00, index 0000, length 64 bytes) SETUP: WR STD DEVICE SET_ADDRESS value 000d index 0000 length 0000 SETUP: RD STD DEVICE GET_DESCRIPTOR DEVICE (value 00, index 0000, length 18 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR CONFIGURATION (value 00, index 0000, length 9 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR CONFIGURATION (value 00, index 0000, length 94 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 00, index 0000, length 255 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 02, index 0409, length 255 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 01, index 0409, length 255 bytes) SETUP: WR STD DEVICE SET_CONFIGURATION value 0001 index 0000 length 0000 SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 03, index 0409, length 255 bytes) ERROR: EP0 TX IRQ while FIFO still full (CSR 000a, bytes left 0 of 50) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: WR STD INTERFACE SET_INTERFACE value 0000 index 0002 length 0000 SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: WR STD INTERFACE SET_INTERFACE value 0001 index 0002 length 0000 Flashing interface selected SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 Flashing mode entered SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 SETUP: RD VND DEVICE req 04 value 0000 index 0000 length 0200 SETUP: RD VND DEVICE req 03 value 0000 index 0000 length 0004 SETUP: WR VND DEVICE req 12 value 0000 index 0000 length 0012 SETUP: RD VND DEVICE req 14 value 0000 index 0000 length 0200 SETUP: WR VND DEVICE req 42 value 0000 index 0000 length 001b Receiving kernel (length 1668224) Image successfully received SETUP: WR VND DEVICE req 82 value 0000 index 0000 length 0000 SETUP: WR STD INTERFACE SET_INTERFACE value 0000 index 0002 length 0000 Boot requested [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.0-rc7-00678-g74bf8ef (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 Sun Jan 10 21:28:50 MST 2016 [ 0.000000] CPU: ARMv6-compatible processor [4107b362] revision 2 (ARMv6TEJ), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Nokia N800 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c043c5c0, node_mem_map c7ef8000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] OMAP2420 [ 0.000000] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait console=ttyO2,115200 earlyprintk debug init=/bin/bash ignore_loglevel [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 117292K/131072K available (2912K kernel code, 173K rwdata, 1040K rodata, 180K init, 8064K bss, 13780K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc03e45d0 (3954 kB) [ 0.000000] .init : 0xc03e5000 - 0xc0412000 ( 180 kB) [ 0.000000] .data : 0xc0412000 - 0xc043d500 ( 174 kB) [ 0.000000] .bss : 0xc043d500 - 0xc0c1d588 (8065 kB) [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 2.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000061] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000610] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present. [ 0.002960] Console: colour dummy device 80x30 [ 0.003143] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003173] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003204] ... MAX_LOCK_DEPTH: 48 [ 0.003234] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003265] ... CLASSHASH_SIZE: 4096 [ 0.003295] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003295] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003326] ... CHAINHASH_SIZE: 32768 [ 0.003356] memory used by lock dependency info: 5167 kB [ 0.003387] per task-struct memory footprint: 1536 bytes [ 0.003448] Calibrating delay loop... 325.63 BogoMIPS (lpj=1628160) [ 0.125152] pid_max: default: 32768 minimum: 301 [ 0.125762] Security Framework initialized [ 0.126129] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.126190] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.135528] CPU: Testing write buffer coherency: ok [ 0.140289] Setting up static identity map for 0x80008200 - 0x8000825c [ 0.157348] devtmpfs: initialized [ 0.297851] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2 [ 0.394897] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.397094] pinctrl core: initialized pinctrl subsystem [ 0.410888] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.416931] cpuidle: using governor ladder [ 0.417053] cpuidle: using governor menu [ 0.481781] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.486328] OMAP GPIO hardware version 1.8 [ 0.490203] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.497406] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.504516] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.510406] omap-gpmc 6800a000.gpmc: GPMC revision 2.0 [ 0.510986] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.518371] No ATAGs? [ 0.518493] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.518524] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.522552] OMAP DMA hardware revision 2.0 [ 0.590942] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.597015] SCSI subsystem initialized [ 0.604675] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 0.608520] omap_i2c 48072000.i2c: bus 1 rev3.3 at 400 kHz [ 0.609741] pps_core: LinuxPPS API ver. 1 registered [ 0.609802] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.612121] clocksource: Switched to clocksource 32k_counter [ 0.728607] hw perfevents: enabled with armv6_1136 PMU driver, 3 counters available [ 0.745330] futex hash table entries: 256 (order: 1, 11264 bytes) [ 0.761169] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.772979] io scheduler noop registered [ 0.773162] io scheduler cfq registered (default) [ 0.780303] pinctrl-single 48000030.pinmux: 275 pins at pa fa000030 size 275 [ 0.785369] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.804473] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.804534] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.805908] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.811584] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.811676] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.812744] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 0.816650] omap_uart 4806e000.serial: no wakeirq for uart2 [ 0.816741] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 0.817626] 4806e000.serial: ttyO2 at MMIO 0x4806e000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 1.465332] console [ttyO2] enabled [ 1.479156] Menelaus rev 2.2 [ 1.490356] i2c /dev entries driver [ 1.501403] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp/i2c@0[0]' - status (0) [ 1.511230] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp/i2c@0[1]' - status (0) [ 1.520996] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp/i2c@0[2]' - status (0) [ 1.540893] retu-mfd 2-0001: Retu & Vilma v1.5 found [ 1.564788] mmci-omap mmci-omap.0: no slots [ 1.724365] mmci-omap mmci-omap.0: command timeout (CMD52) [ 1.731872] mmci-omap mmci-omap.0: command timeout (CMD52) [ 1.745147] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.751861] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.758575] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.765655] hctosys: unable to open rtc device (rtc0) [ 1.873748] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.883575] Waiting for root device /dev/mmcblk0p1... [ 2.264923] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.274169] mmc0: new SDHC card at address 1234 [ 2.286987] mmcblk0: mmc0:1234 SA04G 3.68 GiB [ 2.307067] mmcblk0: p1 [ 2.320892] mmci-omap mmci-omap.0: command timeout (CMD52) [ 2.335815] mmci-omap mmci-omap.0: command timeout (CMD52) [ 2.347747] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 2.355926] mmci-omap mmci-omap.0: command timeout (CMD8) [ 2.362701] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.372314] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.381866] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.392883] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.402191] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.429138] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.437927] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.448028] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.463623] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.472808] VFS: Mounted root (ext3 filesystem) readonly on device 179:1. [ 2.487243] mmci-omap mmci-omap.0: command timeout (CMD1) [ 2.518035] devtmpfs: mounted [ 2.523284] Freeing unused kernel memory: 180K (c03e5000 - c0412000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 455.233459] random: nonblocking pool is initialized $ ÿNOLO X-Loader (v1.1.16, Oct 31 2008) Secondary image size 99036 Booting secondary Nokia OMAP Loader v1.1.16 (Oct 31 2008) running on Nokia N800 F5 (RX-34) Clocks: Core: 658 MHz L3: 109 MHz L4: 109 MHz MPU: 329 MHz DSP: 219 MHz IVA: 109 MHz I2C v3.4 Menelaus v2.2 found Vilma v1.5 found Betty v2.1 found Reset reason: pwr_key System DMA v2.0 OneNAND blocks unlocked in 30264 us Flash id: ec4811 Partition table successfully read McSPI v1.4 RFBI version 1.0 Detecting LCD panel lph8923 Panel ID: 838f48 URAL panel detected Detected LCD panel: ls041y3 S1D13745 Hailstorm detected FB memory blanking took 242 ms (3089 kB/s) Logo drawn in 24 ms (1218 kB/s) Über-cool backlight fade-in took 101 ms Initializing USB USB host detected Entering USB loop SETUP: RD STD DEVICE GET_DESCRIPTOR DEVICE (value 00, index 0000, length 64 bytes) SETUP: WR STD DEVICE SET_ADDRESS value 000e index 0000 length 0000 SETUP: RD STD DEVICE GET_DESCRIPTOR DEVICE (value 00, index 0000, length 18 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR CONFIGURATION (value 00, index 0000, length 9 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR CONFIGURATION (value 00, index 0000, length 94 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 00, index 0000, length 255 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 02, index 0409, length 255 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 01, index 0409, length 255 bytes) SETUP: WR STD DEVICE SET_CONFIGURATION value 0001 index 0000 length 0000 SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 03, index 0409, length 255 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: WR STD INTERFACE SET_INTERFACE value 0000 index 0002 length 0000 SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: WR STD INTERFACE SET_INTERFACE value 0001 index 0002 length 0000 Flashing interface selected SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 Flashing mode entered SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 SETUP: RD VND DEVICE req 04 value 0000 index 0000 length 0200 SETUP: RD VND DEVICE req 03 value 0000 index 0000 length 0004 SETUP: WR VND DEVICE req 12 value 0000 index 0000 length 0012 SETUP: RD VND DEVICE req 14 value 0000 index 0000 length 0200 SETUP: WR VND DEVICE req 42 value 0000 index 0000 length 001b Receiving kernel (length 1668224) Image successfully received SETUP: WR VND DEVICE req 82 value 0000 index 0000 length 0000 SETUP: WR STD INTERFACE SET_INTERFACE value 0000 index 0002 length 0000 Boot requested [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.0-rc7-00678-g74bf8ef (paul@nozomi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 Sun Jan 10 21:28:50 MST 2016 [ 0.000000] CPU: ARMv6-compatible processor [4107b362] revision 2 (ARMv6TEJ), cr=00c5387d [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Nokia N800 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c043c5c0, node_mem_map c7ef8000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] OMAP2420 [ 0.000000] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait console=ttyO2,115200 earlyprintk debug init=/bin/bash ignore_loglevel [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 117292K/131072K available (2912K kernel code, 173K rwdata, 1040K rodata, 180K init, 8064K bss, 13780K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc03e45d0 (3954 kB) [ 0.000000] .init : 0xc03e5000 - 0xc0412000 ( 180 kB) [ 0.000000] .data : 0xc0412000 - 0xc043d500 ( 174 kB) [ 0.000000] .bss : 0xc043d500 - 0xc0c1d588 (8065 kB) [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 2.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000061] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000579] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present. [ 0.002929] Console: colour dummy device 80x30 [ 0.003112] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003143] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003173] ... MAX_LOCK_DEPTH: 48 [ 0.003204] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003234] ... CLASSHASH_SIZE: 4096 [ 0.003265] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003265] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003295] ... CHAINHASH_SIZE: 32768 [ 0.003326] memory used by lock dependency info: 5167 kB [ 0.003356] per task-struct memory footprint: 1536 bytes [ 0.003417] Calibrating delay loop... 325.63 BogoMIPS (lpj=1628160) [ 0.125122] pid_max: default: 32768 minimum: 301 [ 0.125732] Security Framework initialized [ 0.126098] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.126129] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.135467] CPU: Testing write buffer coherency: ok [ 0.140258] Setting up static identity map for 0x80008200 - 0x8000825c [ 0.157287] devtmpfs: initialized [ 0.298095] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2 [ 0.395111] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.397308] pinctrl core: initialized pinctrl subsystem [ 0.411071] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.417144] cpuidle: using governor ladder [ 0.417266] cpuidle: using governor menu [ 0.481964] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.486480] OMAP GPIO hardware version 1.8 [ 0.490386] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.497589] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.504791] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.510650] omap-gpmc 6800a000.gpmc: GPMC revision 2.0 [ 0.511230] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.518554] No ATAGs? [ 0.518707] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.518737] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.522735] OMAP DMA hardware revision 2.0 [ 0.591156] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.597229] SCSI subsystem initialized [ 0.604919] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 0.608764] omap_i2c 48072000.i2c: bus 1 rev3.3 at 400 kHz [ 0.609985] pps_core: LinuxPPS API ver. 1 registered [ 0.610046] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.612365] clocksource: Switched to clocksource 32k_counter [ 0.728881] hw perfevents: enabled with armv6_1136 PMU driver, 3 counters available [ 0.745635] futex hash table entries: 256 (order: 1, 11264 bytes) [ 0.761566] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.773315] io scheduler noop registered [ 0.773498] io scheduler cfq registered (default) [ 0.780639] pinctrl-single 48000030.pinmux: 275 pins at pa fa000030 size 275 [ 0.785797] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.804901] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.804992] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.806365] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.812042] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.812133] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.813201] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 0.817108] omap_uart 4806e000.serial: no wakeirq for uart2 [ 0.817199] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 0.818084] 4806e000.serial: ttyO2 at MMIO 0x4806e000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 1.465637] console [ttyO2] enabled [ 1.479400] Menelaus rev 2.2 [ 1.490570] i2c /dev entries driver [ 1.501586] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp/i2c@0[0]' - status (0) [ 1.511413] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp/i2c@0[1]' - status (0) [ 1.521209] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp/i2c@0[2]' - status (0) [ 1.541076] retu-mfd 2-0001: Retu & Vilma v1.5 found [ 1.564941] mmci-omap mmci-omap.0: no slots [ 1.724609] mmci-omap mmci-omap.0: command timeout (CMD52) [ 1.732116] mmci-omap mmci-omap.0: command timeout (CMD52) [ 1.745391] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.752075] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.758789] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.765869] hctosys: unable to open rtc device (rtc0) [ 1.873199] mmci-omap mmci-omap.0: command timeout (CMD5) [ 1.883331] Waiting for root device /dev/mmcblk0p1... [ 2.265136] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.274414] mmc0: new SDHC card at address 1234 [ 2.287261] mmcblk0: mmc0:1234 SA04G 3.68 GiB [ 2.307403] mmcblk0: p1 [ 2.321197] mmci-omap mmci-omap.0: command timeout (CMD52) [ 2.336090] mmci-omap mmci-omap.0: command timeout (CMD52) [ 2.348022] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 2.356201] mmci-omap mmci-omap.0: command timeout (CMD8) [ 2.363006] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.372619] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.382232] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.393432] mmci-omap mmci-omap.0: command timeout (CMD5) [ 2.402770] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.429748] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.438537] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.448608] mmci-omap mmci-omap.0: command timeout (CMD55) [ 2.464263] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.473419] VFS: Mounted root (ext3 filesystem) readonly on device 179:1. [ 2.487823] mmci-omap mmci-omap.0: command timeout (CMD1) [ 2.518463] devtmpfs: mounted [ 2.523681] Freeing unused kernel memory: 180K (c03e5000 - c0412000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#