U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 8(SOH)/3579(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0037eea1 = 3665569 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3665505 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-rc8-185724-g1683098 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Jan 12 02:17:02 MST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c09d6b40, node_mem_map ef6f9000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef696000 s24936 r8192 d24216 u57344 [ 0.000000] pcpu-alloc: s24936 r8192 d24216 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259904 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001308K/1046528K available (6623K kernel code, 746K rwdata, 2244K rodata, 452K init, 8263K bss, 28836K reserved, 16384K cma-reserved, 243712K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08b0f0c (8868 kB) [ 0.000000] .init : 0xc08b1000 - 0xc0922000 ( 452 kB) [ 0.000000] .data : 0xc0922000 - 0xc09dcb18 ( 747 kB) [ 0.000000] .bss : 0xc09df000 - 0xc11f0c28 (8264 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001403] Console: colour dummy device 80x30 [ 0.001434] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001464] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001464] ... MAX_LOCK_DEPTH: 48 [ 0.001464] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001495] ... CLASSHASH_SIZE: 4096 [ 0.001495] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001495] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001495] ... CHAINHASH_SIZE: 32768 [ 0.001525] memory used by lock dependency info: 5167 kB [ 0.001525] per task-struct memory footprint: 1536 bytes [ 0.001556] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.079284] pid_max: default: 32768 minimum: 301 [ 0.079650] Security Framework initialized [ 0.079803] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079803] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.082916] Initializing cgroup subsys io [ 0.083007] Initializing cgroup subsys memory [ 0.083099] Initializing cgroup subsys devices [ 0.083190] Initializing cgroup subsys freezer [ 0.083312] Initializing cgroup subsys perf_event [ 0.083374] CPU: Testing write buffer coherency: ok [ 0.084930] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.085052] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.179229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.179870] Brought up 2 CPUs [ 0.179901] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.179901] CPU: All CPU(s) started in SVC mode. [ 0.183044] devtmpfs: initialized [ 0.238464] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.243225] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.247589] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.423492] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.425750] pinctrl core: initialized pinctrl subsystem [ 0.430725] NET: Registered protocol family 16 [ 0.436035] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.459411] cpuidle: using governor ladder [ 0.489288] cpuidle: using governor menu [ 0.502929] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.504180] OMAP GPIO hardware version 0.1 [ 0.505401] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.507598] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.509765] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.511840] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.514007] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.534851] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.535400] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.543365] No ATAGs? [ 0.543457] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.543457] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.546020] OMAP DMA hardware revision 0.0 [ 0.604248] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.605865] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.606689] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.610839] SCSI subsystem initialized [ 0.611358] libata version 3.00 loaded. [ 0.612060] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.612609] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.612701] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.612792] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.613159] pps_core: LinuxPPS API ver. 1 registered [ 0.613159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.613220] PTP clock support registered [ 0.617126] clocksource: Switched to clocksource 32k_counter [ 0.756713] NET: Registered protocol family 2 [ 0.758819] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.759002] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.761535] TCP: Hash tables configured (established 8192 bind 8192) [ 0.761840] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.762176] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.763244] NET: Registered protocol family 1 [ 0.764739] RPC: Registered named UNIX socket transport module. [ 0.764739] RPC: Registered udp transport module. [ 0.764739] RPC: Registered tcp transport module. [ 0.764770] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.770019] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.775299] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.775634] audit: initializing netlink subsys (disabled) [ 0.775848] audit: type=2000 audit(0.750:1): initialized [ 0.779785] VFS: Disk quotas dquot_6.6.0 [ 0.780059] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.782531] NFS: Registering the id_resolver key type [ 0.782897] Key type id_resolver registered [ 0.782897] Key type id_legacy registered [ 0.783111] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.787719] bounce: pool size: 64 pages [ 0.787841] io scheduler noop registered [ 0.787841] io scheduler deadline registered [ 0.787902] io scheduler cfq registered (default) [ 0.791412] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.792114] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.798706] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.804443] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.804473] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.804901] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.806549] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.806579] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.806823] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.808044] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.808044] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.808319] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.824127] console [ttyO2] enabled [ 1.860107] brd: module loaded [ 1.883514] loop: module loaded [ 1.889892] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.903625] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.914093] spi1.0 supply vdd-io not found, using dummy regulator [ 1.920928] spi1.0 supply vdd not found, using dummy regulator [ 1.927215] ks8851 spi1.0: message enable is 0 [ 1.937744] ks8851 spi1.0 eth0: revision 1, MAC a2:d6:18:dc:68:12, IRQ 202, no EEPROM [ 1.950714] mousedev: PS/2 mouse device common for all mice [ 1.956573] i2c /dev entries driver [ 1.961730] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.968048] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.974914] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.984497] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.993988] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.001129] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.007293] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.013580] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.020446] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.030059] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.039550] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.046569] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.078765] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.085083] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.091949] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.101562] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.111053] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.118103] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.147644] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.153930] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.160858] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.171234] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.176055] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.182373] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.189239] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.198822] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.208312] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.215362] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.258148] ledtrig-cpu: registered to indicate activity on CPUs [ 2.265686] oprofile: using arm/armv7-ca9 [ 2.270690] Initializing XFRM netlink socket [ 2.275543] NET: Registered protocol family 10 [ 2.283142] sit: IPv6 over IPv4 tunneling driver [ 2.290100] NET: Registered protocol family 17 [ 2.294799] NET: Registered protocol family 15 [ 2.299865] Key type dns_resolver registered [ 2.304656] twl: not initialized [ 2.308044] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.316436] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.324890] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.333282] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.341705] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.350128] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.358551] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.366943] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.374176] omap2_set_init_voltage: unable to set vdd_mpu [ 2.379882] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.387176] omap2_set_init_voltage: unable to set vdd_core [ 2.392944] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.400177] omap2_set_init_voltage: unable to set vdd_iva [ 2.407958] Power Management for TI OMAP4+ devices. [ 2.413085] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.420440] ThumbEE CPU extension supported. [ 2.425994] Registering SWP/SWPB emulation handler [ 2.431060] SmartReflex Class3 initialized [ 2.440124] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.451202] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.458923] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.466094] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.476135] no flags found for reset [ 2.479919] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.487365] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.494476] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.504333] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.514129] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.521453] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.535888] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.535888] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.553955] twl 0-0048: PIH (irq 327) nested IRQs [ 2.559295] mmc0: new high speed SDHC card at address b368 [ 2.568145] mmcblk0: mmc0:b368 USD 3.75 GiB [ 2.577789] mmcblk0: p1 p2 [ 2.589843] VUSIM: failed to get the current voltage(-22) [ 2.589843] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.606811] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.627136] twl6040 0-004b: clk32k is not handled [ 2.636596] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.650390] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.660339] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.667938] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.674682] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.674682] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.687835] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.697479] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.697479] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.713989] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.720123] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.726440] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.726470] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.742858] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.752380] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.759429] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.768127] hw-breakpoint: Failed to enable monitor mode on CPU 1. [ 2.774993] hw-breakpoint: CPU 1 failed to disable vector catch [ 2.817810] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.824066] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.831146] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.840728] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.850250] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.857269] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.865112] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.875946] mmc1: new high speed SDHC card at address 0007 [ 2.883300] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.890686] mmcblk1: p1 p2 [ 2.979156] hctosys: unable to open rtc device (rtc0) [ 2.979156] sr_init: No PMIC hook to init smartreflex [ 2.989807] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.998840] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.007049] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.019073] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.042602] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.052520] mmc2: new SDIO card at address 0001 [ 3.059997] vwl1271: disabling [ 3.065185] VAUX1_6030: disabling [ 3.071594] VDAC: disabling [ 3.075408] VANA: disabling [ 3.079376] VUSB: disabling [ 3.088592] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.124633] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.132324] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 6.599700] EXT4-fs (mmcblk1p2): recovery complete [ 6.617156] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.617156] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 6.638305] devtmpfs: mounted [ 6.642700] Freeing unused kernel memory: 452K (c08b1000 - c0922000) [ 6.954833] random: init urandom read with 31 bits of entropy available [ 6.978210] init: Failed to create pty - disabling logging for job [ 6.985107] init: Temporary process spawn error: No space left on device [ 7.036895] init: Failed to create pty - disabling logging for job [ 7.043792] init: Temporary process spawn error: No space left on device [ 7.068115] init: Failed to create pty - disabling logging for job [ 7.075225] init: Temporary process spawn error: No space left on device [ 7.086120] init: Failed to create pty - disabling logging for job [ 7.094146] init: Temporary process spawn error: No space left on device [ 7.177642] init: hwclock main process (85) terminated with status 1 [ 7.239074] init: ureadahead main process (86) terminated with status 5 [ 7.438995] init: Failed to create pty - disabling logging for job [ 7.447082] init: Temporary process spawn error: No space left on device [ 7.488006] init: Failed to create pty - disabling logging for job [ 7.494720] init: Temporary process spawn error: No space left on device [ 7.587615] init: Failed to create pty - disabling logging for job [ 7.587615] init: Temporary process spawn error: No space left on device [ 8.064758] udevd[141]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177434/963584 files, 2992000/7708672 blocks [ 11.278747] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.289916] init: udev-fallback-graphics main process (406) terminated with status 1 [ 11.497283] init: plymouth main process (87) killed by SEGV signal [ 11.532379] init: plymouth-splash main process (418) terminated with status 2 [ 11.692565] random: nonblocking pool is initialized mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.130554] init: plymouth-log main process (491) terminated with status 1 [ 12.186553] init: failsafe main process (493) killed by TERM signal [ 12.932800] init: plymouth-upstart-bridge main process (531) terminated with status 1 [ 13.136108] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 13.820922] init: bluetooth main process (545) terminated with status 1 [ 13.828857] init: bluetooth main process ended, respawning [ 13.892852] init: alsa-restore main process (586) terminated with status 19 [ 13.912445] init: hybrid-gfx main process (605) terminated with status 1 FATAL: Could not load /lib/modules/4.4.0-rc8-185724-g1683098/modules.dep: No such file or directory [ 14.634033] init: bluetooth main process (681) terminated with status 1 [ 14.641326] init: bluetooth main process ended, respawning [ 14.828216] init: bluetooth main process (699) terminated with status 1 [ 14.836273] init: bluetooth main process ended, respawning [ 15.032836] init: bluetooth main process (716) terminated with status 1 [ 15.067810] init: bluetooth main process ended, respawning [ 15.402709] init: bluetooth main process (735) terminated with status 1 [ 15.413177] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 16.013488] init: bluetooth main process (754) terminated with status 1 [ 16.023132] init: bluetooth main process ended, respawning