Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ## done Bytes transferred = 3670697 (3802a9 hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3670633 Bytes = 3.5 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-185826-gafd2ff9 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Jan 25 12:36:29 MST 2016 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65024 [ 0.000000] free_area_init_node: node 0, pgdat c09d6b40, node_mem_map cfbb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65024 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 14 pages/cpu @cfb3c000 s24936 r8192 d24216 u57344 [ 0.000000] pcpu-alloc: s24936 r8192 d24216 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64448 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 222268K/260096K available (6623K kernel code, 746K rwdata, 2244K rodata, 452K init, 8263K bss, 21444K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08b0f0c (8868 kB) [ 0.000000] .init : 0xc08b1000 - 0xc0922000 ( 452 kB) [ 0.000000] .data : 0xc0922000 - 0xc09dcb18 ( 747 kB) [ 0.000000] .bss : 0xc09df000 - 0xc11f0c28 (8264 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000033] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000076] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000181] OMAP clocksource: timer1 at 13000000 Hz [ 0.001682] Console: colour dummy device 80x30 [ 0.001785] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001802] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001816] ... MAX_LOCK_DEPTH: 48 [ 0.001831] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001845] ... CLASSHASH_SIZE: 4096 [ 0.001858] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001872] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001886] ... CHAINHASH_SIZE: 32768 [ 0.001900] memory used by lock dependency info: 5167 kB [ 0.001915] per task-struct memory footprint: 1536 bytes [ 0.001956] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.095736] pid_max: default: 32768 minimum: 301 [ 0.096388] Security Framework initialized [ 0.096621] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096647] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.101932] Initializing cgroup subsys io [ 0.102115] Initializing cgroup subsys memory [ 0.102247] Initializing cgroup subsys devices [ 0.102399] Initializing cgroup subsys freezer [ 0.102617] Initializing cgroup subsys perf_event [ 0.102733] CPU: Testing write buffer coherency: ok [ 0.105573] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.105952] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.112591] Brought up 1 CPUs [ 0.112629] SMP: Total of 1 processors activated (597.60 BogoMIPS). [ 0.112648] CPU: All CPU(s) started in SVC mode. [ 0.119691] devtmpfs: initialized [ 0.243900] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.324164] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.326582] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.423696] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.427528] pinctrl core: initialized pinctrl subsystem [ 0.436662] NET: Registered protocol family 16 [ 0.447265] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.450920] cpuidle: using governor ladder [ 0.450971] cpuidle: using governor menu [ 0.451908] Reprogramming SDRC clock to 332000000 Hz [ 0.456485] In-band Error seen by USB_OTG at address 0 [ 0.456516] ------------[ cut here ]------------ [ 0.456560] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.456577] Modules linked in: [ 0.456612] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-185826-gafd2ff9 #1 [ 0.456629] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.456690] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.456727] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.456769] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.456800] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.456829] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.456861] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x64/0x200) [ 0.456890] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x38/0x5c) [ 0.456919] [] (handle_irq_event) from [] (handle_level_irq+0xc0/0x150) [ 0.456947] [] (handle_level_irq) from [] (generic_handle_irq+0x18/0x28) [ 0.456972] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.457008] [] (__handle_domain_irq) from [] (__irq_svc+0x58/0x78) [ 0.457039] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.457066] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x450/0x5d0) [ 0.457093] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x160) [ 0.457120] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe0/0x164) [ 0.457159] [] (omap3_l3_probe) from [] (platform_drv_probe+0x50/0xac) [ 0.457191] [] (platform_drv_probe) from [] (driver_probe_device+0x1dc/0x2a8) [ 0.457219] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.457247] [] (bus_for_each_drv) from [] (__device_attach+0xa4/0x108) [ 0.457275] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 0.457302] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.457336] [] (device_add) from [] (of_platform_device_create_pdata+0x80/0xbc) [ 0.457366] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.457393] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.457427] [] (of_platform_populate) from [] (pdata_quirks_init+0x54/0x74) [ 0.457454] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.457491] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.457521] [] (customize_machine) from [] (do_one_initcall+0x80/0x1dc) [ 0.457552] [] (do_one_initcall) from [] (kernel_init_freeable+0x208/0x2e4) [ 0.457594] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.457625] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.457796] ---[ end trace fd0249d59bf50a09 ]--- [ 0.463391] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.471233] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.473739] OMAP GPIO hardware version 2.5 [ 0.476393] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.480326] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.484119] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.488208] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.492039] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.510686] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.511665] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.524919] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.525269] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.528858] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.690709] No ATAGs? [ 0.690761] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.692959] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.693001] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.695079] OMAP DMA hardware revision 4.0 [ 0.755574] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.758456] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.759983] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.761232] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.762473] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.763772] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.764082] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.765365] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.765821] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.767088] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.774627] SCSI subsystem initialized [ 0.776127] libata version 3.00 loaded. [ 0.777408] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.777574] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.778471] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.781891] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.782251] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.783001] pps_core: LinuxPPS API ver. 1 registered [ 0.783027] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.783133] PTP clock support registered [ 0.790521] clocksource: Switched to clocksource timer1 [ 1.039766] NET: Registered protocol family 2 [ 1.043746] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.043859] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.045002] TCP: Hash tables configured (established 2048 bind 2048) [ 1.045356] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.045682] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.047245] NET: Registered protocol family 1 [ 1.050054] RPC: Registered named UNIX socket transport module. [ 1.050252] RPC: Registered udp transport module. [ 1.050277] RPC: Registered tcp transport module. [ 1.050296] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.058485] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.068731] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.069137] audit: initializing netlink subsys (disabled) [ 1.069537] audit: type=2000 audit(1.060:1): initialized [ 1.078483] VFS: Disk quotas dquot_6.6.0 [ 1.078940] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.083620] NFS: Registering the id_resolver key type [ 1.084294] Key type id_resolver registered [ 1.084324] Key type id_legacy registered [ 1.084663] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.094672] io scheduler noop registered [ 1.094729] io scheduler deadline registered [ 1.094823] io scheduler cfq registered (default) [ 1.099461] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.100689] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.101863] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36 [ 1.109341] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.121269] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.121324] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.122021] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.125555] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.125606] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.126197] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.128491] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.128535] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.129032] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.525956] console [ttyO2] enabled [ 2.600794] brd: module loaded [ 2.643932] loop: module loaded [ 2.652577] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.661784] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.668443] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.673380] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.681574] 5 ofpart partitions found on MTD device NAND 512MiB 3,3V 8-bit [ 2.688769] Creating 5 MTD partitions on "NAND 512MiB 3,3V 8-bit": [ 2.695309] 0x000000000000-0x000000080000 : "xloader" [ 2.711430] 0x000000080000-0x000000260000 : "uboot" [ 2.724898] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.738051] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.753162] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.280599] libphy: smsc911x-mdio: probed [ 3.285375] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.297870] smsc911x 2d000000.ethernet eth0: MAC Address: 5e:5b:6e:7b:ff:9c [ 3.350229] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.356724] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.366999] libphy: davinci_mdio.0: probed [ 3.371500] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.380058] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.394949] mousedev: PS/2 mouse device common for all mice [ 3.401003] i2c /dev entries driver [ 3.409814] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.416439] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.423502] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.433910] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.438764] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.445109] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.452051] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.462416] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.512072] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.518393] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.525375] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.535003] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.544527] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.551935] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.562469] ledtrig-cpu: registered to indicate activity on CPUs [ 3.571401] oprofile: using arm/armv7 [ 3.576532] Initializing XFRM netlink socket [ 3.581833] NET: Registered protocol family 10 [ 3.593471] sit: IPv6 over IPv4 tunneling driver [ 3.602490] NET: Registered protocol family 17 [ 3.607308] NET: Registered protocol family 15 [ 3.612763] Key type dns_resolver registered [ 3.617691] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.625375] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.631498] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.638780] omap2_set_init_voltage: unable to set vdd_core [ 3.646426] PM: no software I/O chain control; some wakeups may be lost [ 3.653564] pm: Failed to request pm_wkup irq [ 3.658222] ThumbEE CPU extension supported. [ 3.662829] Registering SWP/SWPB emulation handler [ 3.667885] SmartReflex Class3 initialized [ 3.691315] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.703554] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.714866] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.721835] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.729047] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.739170] no flags found for reset [ 3.743001] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.750437] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.757545] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.767429] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.777219] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.784582] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.793628] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.800633] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.807861] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.817973] no flags found for reset [ 3.821796] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.829177] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.836354] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.846243] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.856032] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.863383] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.877764] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.888702] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.896152] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.902592] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.909444] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.919067] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.928596] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.935672] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.957135] mmc0: new high speed SDHC card at address b368 [ 3.967634] mmcblk0: mmc0:b368 NCard 3.73 GiB (ro) [ 3.979443] mmcblk0: p1 p2 [ 4.014099] davinci_emac davinci_emac.0: using random MAC addr: 12:77:7b:42:f6:0e [ 4.026279] hctosys: unable to open rtc device (rtc0) [ 4.031736] sr_init: No PMIC hook to init smartreflex [ 4.038271] sr_init: platform driver register failed for SR [ 4.125765] hsusb1_vbus: disabling [ 4.129391] hsusb2_vbus: disabling [ 4.133094] ads7846-reg: disabling [ 4.153683] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 4.181224] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 4.189394] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.206643] devtmpfs: mounted [ 4.211549] Freeing unused kernel memory: 452K (c08b1000 - c0922000) /bin/sh: can't access tty; job control turned off # # #