U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete m - CRC mode, 5(SOH)/3632(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0038c15f = 3719519 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3719455 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.5.0-rc2-197173-g36f90b0 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Jan 31 23:01:55 MST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c0a04700, node_mem_map ef6f9000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef696000 s24808 r8192 d24344 u57344 [ 0.000000] pcpu-alloc: s24808 r8192 d24344 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259904 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001120K/1046528K available (6741K kernel code, 770K rwdata, 2280K rodata, 456K init, 8267K bss, 29024K reserved, 16384K cma-reserved, 243712K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d7720 (9022 kB) [ 0.000000] .init : 0xc08d8000 - 0xc094a000 ( 456 kB) [ 0.000000] .data : 0xc094a000 - 0xc0a0a894 ( 771 kB) [ 0.000000] .bss : 0xc0a0d000 - 0xc121fe20 (8268 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001464] Console: colour dummy device 80x30 [ 0.001495] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001525] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001525] ... MAX_LOCK_DEPTH: 48 [ 0.001525] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001525] ... CLASSHASH_SIZE: 4096 [ 0.001556] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001556] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001556] ... CHAINHASH_SIZE: 32768 [ 0.001556] memory used by lock dependency info: 5167 kB [ 0.001586] per task-struct memory footprint: 1536 bytes [ 0.001586] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.079376] pid_max: default: 32768 minimum: 301 [ 0.079833] Security Framework initialized [ 0.079986] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080017] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083526] CPU: Testing write buffer coherency: ok [ 0.085144] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.085235] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.179321] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.179962] Brought up 2 CPUs [ 0.179992] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.179992] CPU: All CPU(s) started in SVC mode. [ 0.183105] devtmpfs: initialized [ 0.237274] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.238128] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.240203] pinctrl core: initialized pinctrl subsystem [ 0.245117] NET: Registered protocol family 16 [ 0.250427] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.255096] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.259582] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.459503] cpuidle: using governor menu [ 0.473114] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio [ 0.474365] OMAP GPIO hardware version 0.1 [ 0.475616] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio [ 0.477783] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio [ 0.479949] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio [ 0.482055] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio [ 0.484161] gpiochip_add_data: registered GPIOs 160 to 191 on device: gpio [ 0.504974] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.505523] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.513336] No ATAGs? [ 0.513427] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.513427] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.515777] OMAP DMA hardware revision 0.0 [ 0.574066] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.575592] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.576477] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.580780] SCSI subsystem initialized [ 0.581237] libata version 3.00 loaded. [ 0.581909] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.582458] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.582550] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.582641] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.582977] pps_core: LinuxPPS API ver. 1 registered [ 0.583007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.583068] PTP clock support registered [ 0.586853] clocksource: Switched to clocksource 32k_counter [ 0.694976] VFS: Disk quotas dquot_6.6.0 [ 0.695129] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.727752] NET: Registered protocol family 2 [ 0.729675] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.729888] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.732421] TCP: Hash tables configured (established 8192 bind 8192) [ 0.732666] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.733032] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.734130] NET: Registered protocol family 1 [ 0.735565] RPC: Registered named UNIX socket transport module. [ 0.735595] RPC: Registered udp transport module. [ 0.735595] RPC: Registered tcp transport module. [ 0.735595] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.740936] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.746093] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.746429] audit: initializing netlink subsys (disabled) [ 0.746612] audit: type=2000 audit(0.720:1): initialized [ 0.753509] NFS: Registering the id_resolver key type [ 0.753875] Key type id_resolver registered [ 0.753906] Key type id_legacy registered [ 0.754089] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.759216] bounce: pool size: 64 pages [ 0.759338] io scheduler noop registered [ 0.759368] io scheduler deadline registered [ 0.759429] io scheduler cfq registered (default) [ 0.762847] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.763580] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.770141] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.775787] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.775817] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.776275] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.778167] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.778167] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.778411] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.779571] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.779571] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.779846] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.759002] console [ttyO2] enabled [ 1.795257] brd: module loaded [ 1.818817] loop: module loaded [ 1.824951] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.838623] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.849060] spi1.0 supply vdd-io not found, using dummy regulator [ 1.855895] spi1.0 supply vdd not found, using dummy regulator [ 1.862182] ks8851 spi1.0: message enable is 0 [ 1.872802] ks8851 spi1.0 eth0: revision 1, MAC fe:d3:2a:f2:a2:6f, IRQ 202, no EEPROM [ 1.885650] mousedev: PS/2 mouse device common for all mice [ 1.891540] i2c /dev entries driver [ 1.896667] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.902984] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.909851] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.919433] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.928924] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.936035] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 1.942199] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 1.948516] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.955352] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.964935] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.974426] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.981475] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.019134] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.025421] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.032287] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.041900] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.051391] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.058441] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.087341] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.093658] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.100555] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.110931] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.115783] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.122100] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.128967] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.138549] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.148040] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.155059] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.197753] ledtrig-cpu: registered to indicate activity on CPUs [ 2.205261] oprofile: using arm/armv7-ca9 [ 2.210266] Initializing XFRM netlink socket [ 2.215148] NET: Registered protocol family 10 [ 2.223175] sit: IPv6 over IPv4 tunneling driver [ 2.230133] NET: Registered protocol family 17 [ 2.234863] NET: Registered protocol family 15 [ 2.239929] Key type dns_resolver registered [ 2.244750] twl: not initialized [ 2.248199] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.256622] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.265075] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.273498] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.281951] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.290374] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.298797] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.307250] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.314453] omap2_set_init_voltage: unable to set vdd_mpu [ 2.320159] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.327484] omap2_set_init_voltage: unable to set vdd_core [ 2.333251] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.340484] omap2_set_init_voltage: unable to set vdd_iva [ 2.348297] Power Management for TI OMAP4+ devices. [ 2.353424] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.361816] ThumbEE CPU extension supported. [ 2.366333] Registering SWP/SWPB emulation handler [ 2.371398] SmartReflex Class3 initialized [ 2.381317] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.392272] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.399261] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.406463] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.416534] no flags found for reset [ 2.420318] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.427764] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.434906] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.444793] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.454559] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.461883] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.476898] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.485595] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.494598] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.501831] mmc0: new high speed SDHC card at address b368 [ 2.502807] twl 0-0048: PIH (irq 327) nested IRQs [ 2.517791] mmcblk0: mmc0:b368 USD 3.76 GiB [ 2.526641] mmcblk0: p1 p2 [ 2.529510] VUSIM: failed to get the current voltage(-22) [ 2.529663] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.532806] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.543273] twl6040 0-004b: clk32k is not handled [ 2.549438] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.571350] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.579498] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.588073] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.594177] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.601165] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.608032] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.617614] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.627136] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.634185] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.640319] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.640319] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.653472] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.663085] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.672607] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.676910] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.685760] omap_hsmmc 4809c000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.697570] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.736846] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.744110] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.750976] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.751007] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.751007] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.777130] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.783538] omap_hsmmc 480d1000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.824737] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.835601] mmc1: new high speed SDHC card at address 0007 [ 2.842864] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.850128] mmcblk1: p1 p2 [ 2.897918] hctosys: unable to open rtc device (rtc0) [ 2.897918] sr_init: No PMIC hook to init smartreflex [ 2.897918] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.918121] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.926971] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 2.981109] VAUX1_6030: disabling [ 2.985107] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 2.996307] VDAC: disabling [ 3.000183] VANA: disabling [ 3.004028] VUSB: disabling [ 3.011077] mmc2: new SDIO card at address 0001 [ 3.016418] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.052856] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.062591] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 6.936798] EXT4-fs (mmcblk1p2): recovery complete [ 6.953399] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.962005] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 6.973876] devtmpfs: mounted [ 6.977508] Freeing unused kernel memory: 456K (c08d8000 - c094a000) [ 7.282073] random: init urandom read with 30 bits of entropy available [ 7.301910] init: Failed to create pty - disabling logging for job [ 7.311737] init: Temporary process spawn error: No space left on device [ 7.362396] init: Failed to create pty - disabling logging for job [ 7.370697] init: Temporary process spawn error: No space left on device [ 7.393432] init: Failed to create pty - disabling logging for job [ 7.401397] init: Temporary process spawn error: No space left on device [ 7.411956] init: Failed to create pty - disabling logging for job [ 7.420318] init: Temporary process spawn error: No space left on device [ 7.510772] init: hwclock main process (83) terminated with status 1 [ 7.569030] init: ureadahead main process (84) terminated with status 5 [ 7.769439] init: Failed to create pty - disabling logging for job [ 7.775970] init: Temporary process spawn error: No space left on device [ 7.815429] init: Failed to create pty - disabling logging for job [ 7.822387] init: Temporary process spawn error: No space left on device [ 7.913726] init: Failed to create pty - disabling logging for job [ 7.920349] init: Temporary process spawn error: No space left on device [ 8.349243] udevd[139]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177444/963584 files, 2992707/7708672 blocks [ 11.582305] init: udev-fallback-graphics main process (408) terminated with status 1 [ 11.672180] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.896423] init: plymouth main process (85) killed by SEGV signal [ 11.907989] init: plymouth-splash main process (428) terminated with status 2 [ 11.951110] random: nonblocking pool is initialized mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.395446] init: plymouth-log main process (485) terminated with status 1 [ 12.452514] init: failsafe main process (487) killed by TERM signal [ 13.182952] init: plymouth-upstart-bridge main process (531) terminated with status 1 [ 13.403930] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 14.086700] init: alsa-restore main process (569) terminated with status 19 [ 14.113861] init: hybrid-gfx main process (587) terminated with status 1 [ 14.401947] init: bluetooth main process (544) terminated with status 1 [ 14.427337] init: bluetooth main process ended, respawning FATAL: Could not load /lib/modules/4.5.0-rc2-197173-g36f90b0/modules.dep: No such file or directory [ 14.881683] init: bluetooth main process (677) terminated with status 1 [ 14.888946] init: bluetooth main process ended, respawning [ 15.066223] init: bluetooth main process (693) terminated with status 1 [ 15.073516] init: bluetooth main process ended, respawning [ 15.343749] init: bluetooth main process (713) terminated with status 1 [ 15.351043] init: bluetooth main process ended, respawning [ 15.676849] init: bluetooth main process (729) terminated with status 1 [ 15.688079] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 [ 16.073883] init: bluetooth main process (751) terminated with status 1 variscite-desktop login: [ 16.098114] init: bluetooth main process ended, respawning [ 16.429199] init: lightdm main process (630) terminated with status 1 [ 16.453460] init: bluetooth main process (781) terminated with status 1 [ 16.462310] init: bluetooth main process ended, respawning [ 16.666320] init: bluetooth main process (799) terminated with status 1 [ 16.674499] init: bluetooth main process ended, respawning [ 16.850250] init: bluetooth main process (815) terminated with status 1 [ 16.857574] init: bluetooth main process ended, respawning