Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############# done Bytes transferred = 3722250 (38cc0a hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3722186 Bytes = 3.5 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.5.0-rc2-197173-g36f90b0 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Jan 31 23:01:55 MST 2016 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65024 [ 0.000000] free_area_init_node: node 0, pgdat c0a04700, node_mem_map cfbb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65024 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 14 pages/cpu @cfb3c000 s24808 r8192 d24344 u57344 [ 0.000000] pcpu-alloc: s24808 r8192 d24344 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64448 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 222080K/260096K available (6741K kernel code, 770K rwdata, 2280K rodata, 456K init, 8267K bss, 21632K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d7720 (9022 kB) [ 0.000000] .init : 0xc08d8000 - 0xc094a000 ( 456 kB) [ 0.000000] .data : 0xc094a000 - 0xc0a0a894 ( 771 kB) [ 0.000000] .bss : 0xc0a0d000 - 0xc121fe20 (8268 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000035] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000078] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000192] OMAP clocksource: timer1 at 13000000 Hz [ 0.001684] Console: colour dummy device 80x30 [ 0.001785] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001803] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001817] ... MAX_LOCK_DEPTH: 48 [ 0.001832] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001846] ... CLASSHASH_SIZE: 4096 [ 0.001860] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001874] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001888] ... CHAINHASH_SIZE: 32768 [ 0.001901] memory used by lock dependency info: 5167 kB [ 0.001916] per task-struct memory footprint: 1536 bytes [ 0.001959] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.105552] pid_max: default: 32768 minimum: 301 [ 0.106276] Security Framework initialized [ 0.106506] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106531] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.112500] CPU: Testing write buffer coherency: ok [ 0.115639] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.115854] Setting up static identity map for 0x80008280 - 0x800082f0 [ 0.122404] Brought up 1 CPUs [ 0.122441] SMP: Total of 1 processors activated (597.60 BogoMIPS). [ 0.122460] CPU: All CPU(s) started in SVC mode. [ 0.129575] devtmpfs: initialized [ 0.252081] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.253649] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.256690] pinctrl core: initialized pinctrl subsystem [ 0.265983] NET: Registered protocol family 16 [ 0.276332] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.358103] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.360411] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.460897] cpuidle: using governor menu [ 0.461864] Reprogramming SDRC clock to 332000000 Hz [ 0.466620] In-band Error seen by USB_OTG at address 0 [ 0.466651] ------------[ cut here ]------------ [ 0.466691] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124() [ 0.466708] Modules linked in: [ 0.466742] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.5.0-rc2-197173-g36f90b0 #1 [ 0.466758] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.466819] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.466853] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 0.466893] [] (dump_stack) from [] (warn_slowpath_common+0x78/0xb4) [ 0.466924] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.466952] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.466983] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x74/0x210) [ 0.467010] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x38/0x5c) [ 0.467039] [] (handle_irq_event) from [] (handle_level_irq+0xc0/0x14c) [ 0.467067] [] (handle_level_irq) from [] (generic_handle_irq+0x18/0x28) [ 0.467091] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.467129] [] (__handle_domain_irq) from [] (__irq_svc+0x58/0x78) [ 0.467161] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.467188] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x450/0x5d0) [ 0.467214] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x160) [ 0.467241] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe0/0x164) [ 0.467277] [] (omap3_l3_probe) from [] (platform_drv_probe+0x50/0xb0) [ 0.467307] [] (platform_drv_probe) from [] (driver_probe_device+0x1f0/0x2ac) [ 0.467334] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.467360] [] (bus_for_each_drv) from [] (__device_attach+0xa0/0x104) [ 0.467385] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 0.467411] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.467449] [] (device_add) from [] (of_platform_device_create_pdata+0x80/0xbc) [ 0.467478] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.467506] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.467547] [] (of_platform_populate) from [] (pdata_quirks_init+0x54/0x74) [ 0.467576] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.467607] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.467636] [] (customize_machine) from [] (do_one_initcall+0x80/0x1dc) [ 0.467663] [] (do_one_initcall) from [] (kernel_init_freeable+0x208/0x2e4) [ 0.467690] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe8) [ 0.467718] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.467891] ---[ end trace d9afacebc8ef9785 ]--- [ 0.473454] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.481141] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio [ 0.483640] OMAP GPIO hardware version 2.5 [ 0.486324] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio [ 0.490193] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio [ 0.493944] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio [ 0.497990] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio [ 0.501790] gpiochip_add_data: registered GPIOs 160 to 191 on device: gpio [ 0.520544] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.521486] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.534641] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.534992] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.538554] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.700482] No ATAGs? [ 0.700538] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.702242] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.702281] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.704398] OMAP DMA hardware revision 4.0 [ 0.764348] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.767293] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.768848] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.770099] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.771345] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.772735] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.773054] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.774239] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.774520] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.775984] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.783677] SCSI subsystem initialized [ 0.785028] libata version 3.00 loaded. [ 0.786482] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.786646] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.787561] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.791038] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.791414] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.792186] pps_core: LinuxPPS API ver. 1 registered [ 0.792210] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.792318] PTP clock support registered [ 0.799473] clocksource: Switched to clocksource timer1 [ 0.995221] VFS: Disk quotas dquot_6.6.0 [ 0.995519] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.053798] NET: Registered protocol family 2 [ 1.057177] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.057286] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.058426] TCP: Hash tables configured (established 2048 bind 2048) [ 1.058817] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.059357] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.060962] NET: Registered protocol family 1 [ 1.063794] RPC: Registered named UNIX socket transport module. [ 1.063835] RPC: Registered udp transport module. [ 1.063854] RPC: Registered tcp transport module. [ 1.063872] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.072531] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.082621] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.083037] audit: initializing netlink subsys (disabled) [ 1.083441] audit: type=2000 audit(1.080:1): initialized [ 1.096446] NFS: Registering the id_resolver key type [ 1.097107] Key type id_resolver registered [ 1.097136] Key type id_legacy registered [ 1.097463] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.107575] io scheduler noop registered [ 1.107632] io scheduler deadline registered [ 1.107731] io scheduler cfq registered (default) [ 1.112789] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.113720] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.114983] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36 [ 1.122804] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.134314] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.134368] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.135272] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.138348] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.138393] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.138879] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.142138] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.142184] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.142680] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.504017] console [ttyO2] enabled [ 2.577348] brd: module loaded [ 2.621307] loop: module loaded [ 2.629991] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.639069] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.645905] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.650801] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.658924] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.665280] Creating 5 MTD partitions on "omap2-nand.0": [ 2.670909] 0x000000000000-0x000000080000 : "xloader" [ 2.687187] 0x000000080000-0x000000260000 : "uboot" [ 2.700801] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.713957] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.728975] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.250006] libphy: smsc911x-mdio: probed [ 3.254789] SMSC LAN8700 2d000000.etherne:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.267398] smsc911x 2d000000.ethernet eth0: MAC Address: 92:a3:7e:2d:e5:05 [ 3.319222] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.325716] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.336100] libphy: davinci_mdio.0: probed [ 3.340602] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.349234] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.364237] mousedev: PS/2 mouse device common for all mice [ 3.370304] i2c /dev entries driver [ 3.379675] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.385989] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.393065] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.403465] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.408323] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.414670] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.421626] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.432000] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.481037] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.487356] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.494346] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.503978] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.513498] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.520912] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.531521] ledtrig-cpu: registered to indicate activity on CPUs [ 3.540473] oprofile: using arm/armv7 [ 3.545605] Initializing XFRM netlink socket [ 3.550938] NET: Registered protocol family 10 [ 3.566512] sit: IPv6 over IPv4 tunneling driver [ 3.575465] NET: Registered protocol family 17 [ 3.580437] NET: Registered protocol family 15 [ 3.585777] Key type dns_resolver registered [ 3.590781] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.598352] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.604492] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.611836] omap2_set_init_voltage: unable to set vdd_core [ 3.619637] PM: no software I/O chain control; some wakeups may be lost [ 3.626640] pm: Failed to request pm_wkup irq [ 3.631384] ThumbEE CPU extension supported. [ 3.635927] Registering SWP/SWPB emulation handler [ 3.641042] SmartReflex Class3 initialized [ 3.660464] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.673072] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.684272] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.691235] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.698445] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.708579] no flags found for reset [ 3.712407] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.719850] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.726976] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.736866] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.746662] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.754024] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.763180] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.770184] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.777409] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.787525] no flags found for reset [ 3.791365] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.798745] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.805921] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.815816] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.825608] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.832959] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.847640] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.858792] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.866225] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.872666] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.879586] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.889224] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.898690] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.905769] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.912604] omap_hsmmc 480b4000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 3.936232] mmc0: new high speed SDHC card at address b368 [ 3.946755] mmcblk0: mmc0:b368 NCard 3.74 GiB (ro) [ 3.958663] mmcblk0: p1 p2 [ 3.992858] davinci_emac davinci_emac.0: using random MAC addr: ce:ed:50:f3:29:28 [ 4.005038] hctosys: unable to open rtc device (rtc0) [ 4.010552] sr_init: No PMIC hook to init smartreflex [ 4.017095] sr_init: platform driver register failed for SR [ 4.106095] hsusb1_vbus: disabling [ 4.109841] hsusb2_vbus: disabling [ 4.113420] ads7846-reg: disabling [ 4.134550] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 4.163035] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 4.171532] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.188621] devtmpfs: mounted [ 4.193465] Freeing unused kernel memory: 456K (c08d8000 - c094a000) /bin/sh: can't access tty; job control turned off # # #