U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete m - CRC mode, 6(SOH)/3635(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0038cd8f = 3722639 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3722575 Bytes = 3.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.5.0-rc3-197606-g388f7b1 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Feb 7 18:08:03 MST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c0cba880, node_mem_map ef6f9000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef696000 s24808 r8192 d24344 u57344 [ 0.000000] pcpu-alloc: s24808 r8192 d24344 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259904 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 999336K/1046528K available (7381K kernel code, 770K rwdata, 2284K rodata, 1024K init, 8267K bss, 30808K reserved, 16384K cma-reserved, 243712K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a70768 (10658 kB) [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0cc0a14 ( 771 kB) [ 0.000000] .bss : 0xc0cc3000 - 0xc14d5e20 (8268 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001434] Console: colour dummy device 80x30 [ 0.001495] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001525] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001525] ... MAX_LOCK_DEPTH: 48 [ 0.001525] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001525] ... CLASSHASH_SIZE: 4096 [ 0.001556] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001556] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001556] ... CHAINHASH_SIZE: 32768 [ 0.001556] memory used by lock dependency info: 5167 kB [ 0.001586] per task-struct memory footprint: 1536 bytes [ 0.001617] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.079345] pid_max: default: 32768 minimum: 301 [ 0.079803] Security Framework initialized [ 0.079956] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079956] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083496] CPU: Testing write buffer coherency: ok [ 0.085083] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.085205] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.179290] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.179931] Brought up 2 CPUs [ 0.179962] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.179962] CPU: All CPU(s) started in SVC mode. [ 0.183105] devtmpfs: initialized [ 0.238403] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.239349] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.241333] pinctrl core: initialized pinctrl subsystem [ 0.246246] NET: Registered protocol family 16 [ 0.251678] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.256378] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.260803] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.459472] cpuidle: using governor menu [ 0.473236] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio [ 0.474517] OMAP GPIO hardware version 0.1 [ 0.475769] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio [ 0.477935] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio [ 0.480102] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio [ 0.482238] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio [ 0.484344] gpiochip_add_data: registered GPIOs 160 to 191 on device: gpio [ 0.505371] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.505920] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.513854] No ATAGs? [ 0.513946] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.513946] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.516296] OMAP DMA hardware revision 0.0 [ 0.574218] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.575775] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.576660] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.581176] SCSI subsystem initialized [ 0.581695] libata version 3.00 loaded. [ 0.582397] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.582946] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.583038] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.583129] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.583496] pps_core: LinuxPPS API ver. 1 registered [ 0.583496] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.583557] PTP clock support registered [ 0.587402] clocksource: Switched to clocksource 32k_counter [ 0.697235] VFS: Disk quotas dquot_6.6.0 [ 0.697479] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.730041] NET: Registered protocol family 2 [ 0.732086] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.732269] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.734802] TCP: Hash tables configured (established 8192 bind 8192) [ 0.735076] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.735443] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.736541] NET: Registered protocol family 1 [ 0.738067] RPC: Registered named UNIX socket transport module. [ 0.738067] RPC: Registered udp transport module. [ 0.738098] RPC: Registered tcp transport module. [ 0.738098] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.743438] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.748779] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.749114] audit: initializing netlink subsys (disabled) [ 0.749328] audit: type=2000 audit(0.730:1): initialized [ 0.755920] NFS: Registering the id_resolver key type [ 0.756286] Key type id_resolver registered [ 0.756286] Key type id_legacy registered [ 0.756500] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.761474] bounce: pool size: 64 pages [ 0.761596] io scheduler noop registered [ 0.761627] io scheduler deadline registered [ 0.761657] io scheduler cfq registered (default) [ 0.765136] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.765869] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.772521] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.778381] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.778381] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.778839] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.780548] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.780578] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.780822] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.781982] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.782012] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.782257] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.761932] console [ttyO2] enabled [ 1.798614] brd: module loaded [ 1.822540] loop: module loaded [ 1.828857] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.842529] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.852996] spi1.0 supply vdd-io not found, using dummy regulator [ 1.859863] spi1.0 supply vdd not found, using dummy regulator [ 1.866119] ks8851 spi1.0: message enable is 0 [ 1.876495] ks8851 spi1.0 eth0: revision 1, MAC ae:c9:36:b5:1b:4c, IRQ 202, no EEPROM [ 1.889343] mousedev: PS/2 mouse device common for all mice [ 1.895202] i2c /dev entries driver [ 1.900390] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.906677] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.913574] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.923156] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.932678] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.939819] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 1.945953] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 1.952270] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.959136] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.968719] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.978210] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.985229] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.019653] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.025939] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.032836] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.042449] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.051940] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.058990] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.087890] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.094177] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.101104] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.111480] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.116333] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.122650] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.129516] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.139099] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.148620] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.155639] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.198455] ledtrig-cpu: registered to indicate activity on CPUs [ 2.205993] oprofile: using arm/armv7-ca9 [ 2.210968] Initializing XFRM netlink socket [ 2.215881] NET: Registered protocol family 10 [ 2.223907] sit: IPv6 over IPv4 tunneling driver [ 2.230895] NET: Registered protocol family 17 [ 2.235626] NET: Registered protocol family 15 [ 2.240631] Key type dns_resolver registered [ 2.245422] twl: not initialized [ 2.248840] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.257232] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.265655] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.274078] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.282501] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.290893] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.299316] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.307769] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.314971] omap2_set_init_voltage: unable to set vdd_mpu [ 2.320678] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.327972] omap2_set_init_voltage: unable to set vdd_core [ 2.333770] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.340972] omap2_set_init_voltage: unable to set vdd_iva [ 2.348785] Power Management for TI OMAP4+ devices. [ 2.353881] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.361236] ThumbEE CPU extension supported. [ 2.362335] Registering SWP/SWPB emulation handler [ 2.371856] SmartReflex Class3 initialized [ 2.381683] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.392974] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.399932] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.402008] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.417175] no flags found for reset [ 2.420959] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.428344] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.428375] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.445343] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.455108] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.462463] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.476776] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.498565] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.505432] twl 0-0048: PIH (irq 327) nested IRQs [ 2.514282] hw-breakpoint: CPU 1 failed to disable vector catch [ 2.532531] VUSIM: failed to get the current voltage(-22) [ 2.532562] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.549530] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.568145] twl6040 0-004b: clk32k is not handled [ 2.579986] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.593841] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.602661] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.611145] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.618133] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.624450] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.631347] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.640930] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.650421] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.657501] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.657653] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.669952] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.676849] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.686462] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.695953] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.696014] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.711425] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.717681] mmc0: new high speed SDHC card at address b368 [ 2.717681] omap_hsmmc 4809c000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.735626] mmcblk0: mmc0:b368 USD 3.76 GiB [ 2.744232] mmcblk0: p1 p2 [ 2.788635] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.788635] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.801788] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.801818] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.820861] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.827911] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.834381] omap_hsmmc 480d1000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.886352] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.897216] mmc1: new high speed SDHC card at address 0007 [ 2.904602] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.911926] mmcblk1: p1 p2 [ 2.948852] hctosys: unable to open rtc device (rtc0) [ 2.954681] sr_init: No PMIC hook to init smartreflex [ 2.960113] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.968536] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 2.968933] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.968933] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.011657] mmc2: new SDIO card at address 0001 [ 3.019927] VAUX1_6030: disabling [ 3.026580] VDAC: disabling [ 3.030517] VANA: disabling [ 3.034393] VUSB: disabling [ 3.044403] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.079620] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.089477] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 6.588684] EXT4-fs (mmcblk1p2): recovery complete [ 6.601806] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.610412] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 6.622772] devtmpfs: mounted [ 6.626434] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000) [ 6.933837] random: init urandom read with 30 bits of entropy available [ 6.956115] init: Failed to create pty - disabling logging for job [ 6.962615] init: Temporary process spawn error: No space left on device [ 7.014160] init: Failed to create pty - disabling logging for job [ 7.021362] init: Temporary process spawn error: No space left on device [ 7.041107] init: Failed to create pty - disabling logging for job [ 7.048248] init: Temporary process spawn error: No space left on device [ 7.058959] init: Failed to create pty - disabling logging for job [ 7.067016] init: Temporary process spawn error: No space left on device [ 7.158142] init: hwclock main process (82) terminated with status 1 [ 7.209533] init: ureadahead main process (83) terminated with status 5 [ 7.405303] init: Failed to create pty - disabling logging for job [ 7.411895] init: Temporary process spawn error: No space left on device [ 7.452545] init: Failed to create pty - disabling logging for job [ 7.459197] init: Temporary process spawn error: No space left on device [ 7.550048] init: Failed to create pty - disabling logging for job [ 7.556915] init: Temporary process spawn error: No space left on device [ 8.069366] udevd[139]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177446/963584 files, 2992836/7708672 blocks [ 11.330566] init: udev-fallback-graphics main process (403) terminated with status 1 [ 11.410400] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.588836] init: plymouth main process (85) killed by SEGV signal [ 11.598785] init: plymouth-splash main process (430) terminated with status 2 [ 11.626373] random: nonblocking pool is initialized mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.096282] init: plymouth-log main process (489) terminated with status 1 [ 12.153839] init: failsafe main process (490) killed by TERM signal [ 12.878509] init: plymouth-upstart-bridge main process (538) terminated with status 1 [ 13.103271] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 13.745697] init: bluetooth main process (548) terminated with status 1 [ 13.765655] init: bluetooth main process ended, respawning [ 13.886138] init: alsa-restore main process (584) terminated with status 19 [ 13.923492] init: hybrid-gfx main process (601) terminated with status 1 FATAL: Could not load /lib/modules/4.5.0-rc3-197606-g388f7b1/modules.dep: No such file or directory [ 14.689270] init: bluetooth main process (679) terminated with status 1 [ 14.696380] init: bluetooth main process ended, respawning [ 14.876007] init: bluetooth main process (698) terminated with status 1 [ 14.885864] init: bluetooth main process ended, respawning [ 15.071655] init: bluetooth main process (714) terminated with status 1 [ 15.081604] init: bluetooth main process ended, respawning [ 15.380645] init: bluetooth main process (734) terminated with status 1 [ 15.396881] init: bluetooth main process ended, respawning [ 15.868865] init: bluetooth main process (756) terminated with status 1 [ 15.888916] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: