U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete em - CRC mode, 7(SOH)/3638(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0038da2f = 3725871 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3725807 Bytes = 3.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.5.0-rc4-197928-g18558ca (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Feb 14 14:55:59 MST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c0cba8c0, node_mem_map ef6f9000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef696000 s24808 r8192 d24344 u57344 [ 0.000000] pcpu-alloc: s24808 r8192 d24344 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259904 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 999480K/1046528K available (7381K kernel code, 770K rwdata, 2284K rodata, 1024K init, 8123K bss, 30664K reserved, 16384K cma-reserved, 243712K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a707a8 (10658 kB) [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0cc0a54 ( 771 kB) [ 0.000000] .bss : 0xc0cc3000 - 0xc14b1e60 (8124 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001403] Console: colour dummy device 80x30 [ 0.001464] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001464] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001495] ... MAX_LOCK_DEPTH: 48 [ 0.001495] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001495] ... CLASSHASH_SIZE: 4096 [ 0.001495] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001525] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001525] ... CHAINHASH_SIZE: 32768 [ 0.001525] memory used by lock dependency info: 5167 kB [ 0.001525] per task-struct memory footprint: 1536 bytes [ 0.001556] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.079406] pid_max: default: 32768 minimum: 301 [ 0.079864] Security Framework initialized [ 0.080017] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080017] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083557] CPU: Testing write buffer coherency: ok [ 0.085144] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.085266] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.179351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.179992] Brought up 2 CPUs [ 0.180023] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.180023] CPU: All CPU(s) started in SVC mode. [ 0.183288] devtmpfs: initialized [ 0.239318] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.240295] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.242309] pinctrl core: initialized pinctrl subsystem [ 0.247253] NET: Registered protocol family 16 [ 0.252716] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.257751] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.262481] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.469512] cpuidle: using governor menu [ 0.483612] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio [ 0.484924] OMAP GPIO hardware version 0.1 [ 0.486175] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio [ 0.488433] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio [ 0.490631] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio [ 0.492828] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio [ 0.494995] gpiochip_add_data: registered GPIOs 160 to 191 on device: gpio [ 0.516601] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.517150] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.525238] No ATAGs? [ 0.525329] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.525329] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.527709] OMAP DMA hardware revision 0.0 [ 0.584381] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.585937] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.586791] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.591125] SCSI subsystem initialized [ 0.591613] libata version 3.00 loaded. [ 0.592315] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.592864] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.592956] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.593048] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.593414] pps_core: LinuxPPS API ver. 1 registered [ 0.593414] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.593475] PTP clock support registered [ 0.597381] clocksource: Switched to clocksource 32k_counter [ 0.709136] VFS: Disk quotas dquot_6.6.0 [ 0.709289] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.742187] NET: Registered protocol family 2 [ 0.744293] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.744476] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.747009] TCP: Hash tables configured (established 8192 bind 8192) [ 0.747283] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.747772] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.748870] NET: Registered protocol family 1 [ 0.750305] RPC: Registered named UNIX socket transport module. [ 0.750305] RPC: Registered udp transport module. [ 0.750335] RPC: Registered tcp transport module. [ 0.750335] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.755645] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.761016] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.761322] audit: initializing netlink subsys (disabled) [ 0.761535] audit: type=2000 audit(0.740:1): initialized [ 0.768280] NFS: Registering the id_resolver key type [ 0.768646] Key type id_resolver registered [ 0.768646] Key type id_legacy registered [ 0.768859] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.773406] bounce: pool size: 64 pages [ 0.773498] io scheduler noop registered [ 0.773529] io scheduler deadline registered [ 0.773590] io scheduler cfq registered (default) [ 0.777130] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.777923] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.784393] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.790161] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.790161] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.790649] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.792144] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.792144] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.792419] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.793548] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.793579] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.793823] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.773193] console [ttyO2] enabled [ 1.810363] brd: module loaded [ 1.834259] loop: module loaded [ 1.840484] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.854187] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.864654] spi1.0 supply vdd-io not found, using dummy regulator [ 1.871490] spi1.0 supply vdd not found, using dummy regulator [ 1.877777] ks8851 spi1.0: message enable is 0 [ 1.888336] ks8851 spi1.0 eth0: revision 1, MAC ca:bb:31:a7:db:37, IRQ 202, no EEPROM [ 1.901214] mousedev: PS/2 mouse device common for all mice [ 1.907073] i2c /dev entries driver [ 1.912231] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.918548] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.925415] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.934997] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.944488] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.951629] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 1.957763] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 1.964080] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.970916] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.980529] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.990020] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.997039] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.039031] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.045349] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.052215] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.061828] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.071319] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.078369] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.107849] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.114166] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.121063] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.131439] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.136291] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.142608] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.149475] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.159057] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.168548] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.175598] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.218200] ledtrig-cpu: registered to indicate activity on CPUs [ 2.225677] oprofile: using arm/armv7-ca9 [ 2.230651] Initializing XFRM netlink socket [ 2.235534] NET: Registered protocol family 10 [ 2.243408] sit: IPv6 over IPv4 tunneling driver [ 2.250396] NET: Registered protocol family 17 [ 2.255126] NET: Registered protocol family 15 [ 2.260162] Key type dns_resolver registered [ 2.264953] twl: not initialized [ 2.268371] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.276763] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.285186] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.293609] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.302032] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.310455] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.318878] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.327331] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.334533] omap2_set_init_voltage: unable to set vdd_mpu [ 2.340240] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.347534] omap2_set_init_voltage: unable to set vdd_core [ 2.353302] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.360534] omap2_set_init_voltage: unable to set vdd_iva [ 2.368377] Power Management for TI OMAP4+ devices. [ 2.373474] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.380828] ThumbEE CPU extension supported. [ 2.380828] Registering SWP/SWPB emulation handler [ 2.391448] SmartReflex Class3 initialized [ 2.400421] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.412567] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.419525] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.426666] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.436706] no flags found for reset [ 2.440521] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.447906] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.447937] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.464874] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.474639] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.481964] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.494720] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.506774] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.513854] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.522613] twl 0-0048: PIH (irq 327) nested IRQs [ 2.535644] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.548156] mmc0: new high speed SDHC card at address b368 [ 2.560119] mmcblk0: mmc0:b368 USD 3.76 GiB [ 2.567413] VUSIM: failed to get the current voltage(-22) [ 2.567413] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.584320] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.601745] mmcblk0: p1 p2 [ 2.614532] twl6040 0-004b: clk32k is not handled [ 2.623291] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.637329] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.645965] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.654541] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.660644] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.667663] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.674530] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.674560] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.693603] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.700653] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.700653] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.713073] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.719940] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.719970] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.739013] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.739044] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.752197] omap_hsmmc 4809c000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.807647] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.814819] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.821685] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.831268] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.840789] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.840789] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.854217] omap_hsmmc 480d1000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.895263] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.905975] mmc1: new high speed SDHC card at address 0007 [ 2.913421] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.920989] mmcblk1: p1 p2 [ 2.978302] hctosys: unable to open rtc device (rtc0) [ 2.982269] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 2.992858] sr_init: No PMIC hook to init smartreflex [ 2.998565] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.999084] mmc2: new SDIO card at address 0001 [ 3.012084] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.020812] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.057342] vwl1271: disabling [ 3.076446] VAUX1_6030: disabling [ 3.083343] VDAC: disabling [ 3.087188] VANA: disabling [ 3.091064] VUSB: disabling [ 3.100646] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.137847] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.137847] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 6.638031] EXT4-fs (mmcblk1p2): recovery complete [ 6.651336] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.660064] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 6.672332] devtmpfs: mounted [ 6.676025] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000) [ 6.984649] random: init urandom read with 30 bits of entropy available [ 7.006896] init: Failed to create pty - disabling logging for job [ 7.013671] init: Temporary process spawn error: No space left on device [ 7.065002] init: Failed to create pty - disabling logging for job [ 7.071594] init: Temporary process spawn error: No space left on device [ 7.091583] init: Failed to create pty - disabling logging for job [ 7.098876] init: Temporary process spawn error: No space left on device [ 7.109710] init: Failed to create pty - disabling logging for job [ 7.117889] init: Temporary process spawn error: No space left on device [ 7.211456] init: hwclock main process (82) terminated with status 1 [ 7.250366] init: ureadahead main process (83) terminated with status 5 [ 7.456237] init: Failed to create pty - disabling logging for job [ 7.463439] init: Temporary process spawn error: No space left on device [ 7.503479] init: Failed to create pty - disabling logging for job [ 7.510101] init: Temporary process spawn error: No space left on device [ 7.601623] init: Failed to create pty - disabling logging for job [ 7.608367] init: Temporary process spawn error: No space left on device [ 8.134796] udevd[139]: starting version 175 fsck from util-linux 2.20.1 /dev/mmcblk1p2: clean, 177450/963584 files, 2993096/7708672 blocks [ 11.373992] init: udev-fallback-graphics main process (412) terminated with status 1 [ 11.450225] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.709320] random: nonblocking pool is initialized [ 11.754791] init: plymouth-splash main process (428) terminated with status 2 [ 11.779357] init: plymouth main process (85) killed by SEGV signal mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.152404] init: plymouth-log main process (487) terminated with status 1 [ 12.202331] init: failsafe main process (490) killed by TERM signal [ 12.984008] init: plymouth-upstart-bridge main process (539) terminated with status 1 [ 13.148956] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 13.803344] init: bluetooth main process (546) terminated with status 1 [ 13.827331] init: bluetooth main process ended, respawning [ 13.915100] init: alsa-restore main process (577) terminated with status 19 [ 13.931243] init: hybrid-gfx main process (592) terminated with status 1 FATAL: Could not load /lib/modules/4.5.0-rc4-197928-g18558ca/modules.dep: No such file or directory [ 15.123779] init: bluetooth main process (677) terminated with status 1 [ 15.131317] init: bluetooth main process ended, respawning [ 15.451629] init: bluetooth main process (702) terminated with status 1 [ 15.459320] init: bluetooth main process ended, respawning [ 15.950195] init: bluetooth main process (723) terminated with status 1 [ 15.957855] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 16.263763] init: bluetooth main process (753) terminated with status 1 [ 16.273681] init: bluetooth main process ended, respawning [ 16.323455] init: lightdm main process (635) terminated with status 1 [ 16.497344] init: bluetooth main process (771) terminated with status 1 [ 16.504943] init: bluetooth main process ended, respawning [ 16.694824] init: bluetooth main process (787) terminated with status 1 [ 16.704437] init: bluetooth main process ended, respawning [ 16.936645] init: bluetooth main process (803) terminated with status 1 [ 16.947631] init: bluetooth main process ended, respawning