U-Boot SPL 2013.01-rc1-00207-gfbeb8fc-dirty (Nov 29 2012 - 03:05:13) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2013.01-rc1-00207-gfbeb8fc-dirty (Nov 29 2012 - 03:05:13) CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 3  0 Panda # Panda # setenv bootargs 'console=ttyO2,230400n8 root=/dev/mmcblk0p2 rootwait vram=32M debug earlyprintk ignore_loglevel init=/bin/sh' Panda # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 230400 bps... CSending: uImage-dtb.omap4-panda-es Sending: Transfer complete RC mode, 5(SOH)/3644(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0038f149 = 3731785 Bytes Panda # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3731721 Bytes = 3.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.5.0-rc5-198173-g81f70ba (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sat Feb 20 20:22:45 MST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI OMAP4 PandaBoard-ES [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c0cba980, node_mem_map ef6f9000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef696000 s24808 r8192 d24344 u57344 [ 0.000000] pcpu-alloc: s24808 r8192 d24344 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259904 [ 0.000000] Kernel command line: console=ttyO2,230400n8 root=/dev/mmcblk0p2 rootwait vram=32M debug earlyprintk ignore_loglevel init=/bin/sh [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 999480K/1046528K available (7381K kernel code, 770K rwdata, 2284K rodata, 1024K init, 8123K bss, 30664K reserved, 16384K cma-reserved, 243712K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a707d4 (10658 kB) [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0cc0b14 ( 771 kB) [ 0.000000] .bss : 0xc0cc3000 - 0xc14b1e60 (8124 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001464] Console: colour dummy device 80x30 [ 0.001525] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001525] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001556] ... MAX_LOCK_DEPTH: 48 [ 0.001556] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001556] ... CLASSHASH_SIZE: 4096 [ 0.001556] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001586] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001586] ... CHAINHASH_SIZE: 32768 [ 0.001586] memory used by lock dependency info: 5167 kB [ 0.001586] per task-struct memory footprint: 1536 bytes [ 0.001617] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.079376] pid_max: default: 32768 minimum: 301 [ 0.079833] Security Framework initialized [ 0.079956] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079986] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083526] CPU: Testing write buffer coherency: ok [ 0.085113] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.085205] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.179351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.179992] Brought up 2 CPUs [ 0.179992] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.180023] CPU: All CPU(s) started in SVC mode. [ 0.183258] devtmpfs: initialized [ 0.239532] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.240447] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.242462] pinctrl core: initialized pinctrl subsystem [ 0.247375] NET: Registered protocol family 16 [ 0.252716] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.257324] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.261749] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.459533] cpuidle: using governor menu [ 0.473480] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio [ 0.474761] OMAP GPIO hardware version 0.1 [ 0.476013] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio [ 0.478240] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio [ 0.480407] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio [ 0.482574] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio [ 0.484710] gpiochip_add_data: registered GPIOs 160 to 191 on device: gpio [ 0.486602] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.486724] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.487762] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 ! [ 0.488433] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 ! [ 0.489074] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 ! [ 0.510742] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.511291] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.521057] No ATAGs? [ 0.521148] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.521148] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.523529] OMAP DMA hardware revision 0.0 [ 0.584930] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.586730] of_get_named_gpiod_flags: parsed 'gpio' property of node '/hsusb1_power_reg[0]' - status (0) [ 0.659759] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_gpio, deferring probe [ 0.664642] SCSI subsystem initialized [ 0.665130] libata version 3.00 loaded. [ 0.665863] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 0.665863] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 0.665924] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 0.666015] no flags found for reset [ 0.666015] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 0.666046] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 0.666046] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 0.666076] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 0.666076] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 0.666198] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 0.667297] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.667388] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c2_pins, deferring probe [ 0.667480] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.667572] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.667968] pps_core: LinuxPPS API ver. 1 registered [ 0.667999] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.668060] PTP clock support registered [ 0.671936] clocksource: Switched to clocksource 32k_counter [ 0.778808] VFS: Disk quotas dquot_6.6.0 [ 0.778991] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.811706] NET: Registered protocol family 2 [ 0.813903] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.814086] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.816619] TCP: Hash tables configured (established 8192 bind 8192) [ 0.816925] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.817260] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.818328] NET: Registered protocol family 1 [ 0.819763] RPC: Registered named UNIX socket transport module. [ 0.819793] RPC: Registered udp transport module. [ 0.819793] RPC: Registered tcp transport module. [ 0.819793] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.825256] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.830657] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.830963] audit: initializing netlink subsys (disabled) [ 0.831176] audit: type=2000 audit(0.810:1): initialized [ 0.837890] NFS: Registering the id_resolver key type [ 0.838256] Key type id_resolver registered [ 0.838256] Key type id_legacy registered [ 0.838439] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.843444] bounce: pool size: 64 pages [ 0.843566] io scheduler noop registered [ 0.843597] io scheduler deadline registered [ 0.843627] io scheduler cfq registered (default) [ 0.847534] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.848052] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.855041] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.860809] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.860839] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.861297] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 226, base_baud = 3000000) is a OMAP UART0 [ 0.863128] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.863403] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 227, base_baud = 3000000) is a OMAP UART1 [ 0.864532] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.864776] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 228, base_baud = 3000000) is a OMAP UART2 [ 1.422058] console [ttyO2] enabled [ 1.425231] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806e000[0]' [ 1.430603] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 229, base_baud = 3000000) is a OMAP UART3 [ 1.469116] brd: module loaded [ 1.491424] loop: module loaded [ 1.496307] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.513214] mousedev: PS/2 mouse device common for all mice [ 1.516265] i2c /dev entries driver [ 1.519653] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.522979] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.526550] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.531494] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.536437] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.540100] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 1.543304] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 1.546569] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.550140] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.555114] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.560028] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.563720] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 1.603576] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 1.606842] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 1.610382] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 1.615417] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 1.620330] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 1.624023] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 1.652587] ledtrig-cpu: registered to indicate activity on CPUs [ 1.657104] oprofile: using arm/armv7-ca9 [ 1.660064] Initializing XFRM netlink socket [ 1.662841] NET: Registered protocol family 10 [ 1.667694] sit: IPv6 over IPv4 tunneling driver [ 1.672454] NET: Registered protocol family 17 [ 1.674957] NET: Registered protocol family 15 [ 1.677703] Key type dns_resolver registered [ 1.680328] twl: not initialized [ 1.682128] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.686492] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.690856] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.695220] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.699615] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.703979] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.708343] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 1.712738] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 1.716491] omap2_set_init_voltage: unable to set vdd_mpu [ 1.719421] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 1.723236] omap2_set_init_voltage: unable to set vdd_core [ 1.726257] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 1.729980] omap2_set_init_voltage: unable to set vdd_iva [ 1.735046] Power Management for TI OMAP4+ devices. [ 1.737701] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.742797] ThumbEE CPU extension supported. [ 1.742797] Registering SWP/SWPB emulation handler [ 1.742797] SmartReflex Class3 initialized [ 1.755737] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 1.764739] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.782104] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 1.792114] hw-breakpoint: CPU 0 failed to disable vector catch [ 1.797393] twl 0-0048: PIH (irq 340) nested IRQs [ 1.825378] twl6040 0-004b: clk32k is not handled [ 1.834777] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 1.843292] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.849273] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 1.854278] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 1.859863] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 1.863525] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.866790] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.866790] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.875305] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.880218] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.883880] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 1.887084] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 1.887084] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.893890] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.893920] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.893920] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.907348] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 1.910827] omap_hsmmc 4809c000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 1.982482] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 1.982482] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 1.985748] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 1.994232] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 1.994262] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.002777] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.006225] omap_hsmmc 480d5000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.143768] hctosys: unable to open rtc device (rtc0) [ 2.146514] sr_init: No PMIC hook to init smartreflex [ 2.147003] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.153961] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.158843] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.163665] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 2.163848] mmc1: new SDIO card at address 0001 [ 2.205230] vwl1271: disabling [ 2.219024] VDAC: disabling [ 2.221405] VANA: disabling [ 2.223815] VUSB: disabling [ 2.227996] Waiting for root device /dev/mmcblk0p2... [ 2.380859] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.387939] mmc0: new high speed SD card at address 1234 [ 2.393493] mmcblk0: mmc0:1234 SA02G 1.83 GiB [ 2.401031] mmcblk0: p1 p2 [ 2.455780] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem [ 2.483001] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.487487] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 2.506805] devtmpfs: mounted [ 2.509460] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000) /bin/sh: can't access tty; job control turned off / # / # / #