U-Boot SPL 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.bin mkimage signature not found - ih_magic = ea000014 reading u-boot.bin U-Boot 2012.07-00012-g391a28d (Dec 30 2012 - 17:40:39) CPU : OMAP4460 ES1.1 Board: OMAP4 Variscite SOM I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. checking for preEnv.txt reading preEnv.txt 0 bytes read Loaded environment from preEnv.txt Importing preboot environment from mmc ... Hit any key to stop autoboot: 3  0 VAR-SOM-OM44 # VAR-SOM-OM44 # setenv bootargs 'console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60' VAR-SOM-OM44 # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 115200 bps... CSending: uImage-dtb.omap4-var-stk-om44 Sending: Transfer complete - CRC mode, 6(SOH)/3645(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0038f5e7 = 3732967 Bytes VAR-SOM-OM44 # bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3732903 Bytes = 3.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.5.0-rc7-198739-gf6cede5 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Mar 6 18:56:14 MST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Variscite VAR-STK-OM44 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] free_area_init_node: node 0, pgdat c0cbaa40, node_mem_map ef6f9000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef696000 s24808 r8192 d24344 u57344 [ 0.000000] pcpu-alloc: s24808 r8192 d24344 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259904 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk1p2 ro rootwait debug earlyprintk ignore_loglevel fixrtc phy.smsc.gb_enable=false video=HDMI-A-1:1920x1080@60 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 999480K/1046528K available (7382K kernel code, 770K rwdata, 2284K rodata, 1024K init, 8123K bss, 30664K reserved, 16384K cma-reserved, 243712K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a70808 (10659 kB) [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0cc0bd4 ( 771 kB) [ 0.000000] .bss : 0xc0cc3000 - 0xc14b1ea0 (8124 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001403] Console: colour dummy device 80x30 [ 0.001464] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001495] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001495] ... MAX_LOCK_DEPTH: 48 [ 0.001495] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001495] ... CLASSHASH_SIZE: 4096 [ 0.001525] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001525] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001525] ... CHAINHASH_SIZE: 32768 [ 0.001525] memory used by lock dependency info: 5167 kB [ 0.001556] per task-struct memory footprint: 1536 bytes [ 0.001556] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.079406] pid_max: default: 32768 minimum: 301 [ 0.079864] Security Framework initialized [ 0.079986] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080017] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083587] CPU: Testing write buffer coherency: ok [ 0.085205] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.085296] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.179351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.179992] Brought up 2 CPUs [ 0.180023] SMP: Total of 2 processors activated (2795.11 BogoMIPS). [ 0.180023] CPU: All CPU(s) started in SVC mode. [ 0.183258] devtmpfs: initialized [ 0.239227] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.240203] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.242218] pinctrl core: initialized pinctrl subsystem [ 0.247192] NET: Registered protocol family 16 [ 0.252716] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.257598] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.262207] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.469512] cpuidle: using governor menu [ 0.483581] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio [ 0.484863] OMAP GPIO hardware version 0.1 [ 0.486114] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio [ 0.488342] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio [ 0.490539] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio [ 0.492706] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio [ 0.494842] gpiochip_add_data: registered GPIOs 160 to 191 on device: gpio [ 0.516296] platform 4b501000.aes: Cannot lookup hwmod 'aes' [ 0.516815] platform 480a5000.des: Cannot lookup hwmod 'des' [ 0.524871] No ATAGs? [ 0.524963] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.524963] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.527313] OMAP DMA hardware revision 0.0 [ 0.584442] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.586029] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vbat[0]' [ 0.586883] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_ctrl_pins, deferring probe [ 0.591094] SCSI subsystem initialized [ 0.591583] libata version 3.00 loaded. [ 0.592285] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@4a000000/l4@300000/pinmux@1e040/pinmux_hsusbb1_phy_clk_pins, deferring probe [ 0.592864] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe [ 0.592956] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe [ 0.593048] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe [ 0.593383] pps_core: LinuxPPS API ver. 1 registered [ 0.593414] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.593475] PTP clock support registered [ 0.597412] clocksource: Switched to clocksource 32k_counter [ 0.705963] VFS: Disk quotas dquot_6.6.0 [ 0.706115] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.739227] NET: Registered protocol family 2 [ 0.741241] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.741424] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.743988] TCP: Hash tables configured (established 8192 bind 8192) [ 0.744232] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.744598] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.745727] NET: Registered protocol family 1 [ 0.747039] RPC: Registered named UNIX socket transport module. [ 0.747070] RPC: Registered udp transport module. [ 0.747070] RPC: Registered tcp transport module. [ 0.747070] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.752532] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.757873] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.758209] audit: initializing netlink subsys (disabled) [ 0.758453] audit: type=2000 audit(0.740:1): initialized [ 0.765502] NFS: Registering the id_resolver key type [ 0.765869] Key type id_resolver registered [ 0.765869] Key type id_legacy registered [ 0.766052] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.771087] bounce: pool size: 64 pages [ 0.771209] io scheduler noop registered [ 0.771240] io scheduler deadline registered [ 0.771301] io scheduler cfq registered (default) [ 0.774841] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406 [ 0.775573] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56 [ 0.782165] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.787963] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.787994] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 0.788452] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 223, base_baud = 3000000) is a OMAP UART0 [ 0.790100] omap_uart 4806c000.serial: no wakeirq for uart1 [ 0.790130] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 0.790374] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 224, base_baud = 3000000) is a OMAP UART1 [ 0.791503] omap_uart 48020000.serial: no wakeirq for uart2 [ 0.791534] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48020000[0]' [ 0.791778] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 225, base_baud = 3000000) is a OMAP UART2 [ 1.771148] console [ttyO2] enabled [ 1.807647] brd: module loaded [ 1.831756] loop: module loaded [ 1.838104] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.851898] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/spi@48098000/eth@0[0]' [ 1.862365] spi1.0 supply vdd-io not found, using dummy regulator [ 1.869171] spi1.0 supply vdd not found, using dummy regulator [ 1.875518] ks8851 spi1.0: message enable is 0 [ 1.886169] ks8851 spi1.0 eth0: revision 1, MAC ca:84:96:99:08:eb, IRQ 202, no EEPROM [ 1.899200] mousedev: PS/2 mouse device common for all mice [ 1.905059] i2c /dev entries driver [ 1.910278] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 1.916564] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.923461] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.933044] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.942535] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.949707] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 1.955810] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 1.962127] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 1.968994] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 1.978576] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 1.988098] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 1.995117] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.039062] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.045349] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.052246] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.061859] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.071350] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.078399] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.117919] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer cd [ 2.124206] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.131134] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@480d5000[0]' - status (0) [ 2.141510] omap_hsmmc 480d5000.mmc: Got CD GPIO [ 2.146362] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.152679] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.159545] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.169128] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.178619] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.185638] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.228179] ledtrig-cpu: registered to indicate activity on CPUs [ 2.235687] oprofile: using arm/armv7-ca9 [ 2.240661] Initializing XFRM netlink socket [ 2.245544] NET: Registered protocol family 10 [ 2.253601] sit: IPv6 over IPv4 tunneling driver [ 2.260620] NET: Registered protocol family 17 [ 2.265319] NET: Registered protocol family 15 [ 2.270355] Key type dns_resolver registered [ 2.275207] twl: not initialized [ 2.278625] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.286987] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.295440] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.303833] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.312255] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.320678] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.329101] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.337524] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.344726] omap2_set_init_voltage: unable to set vdd_mpu [ 2.350433] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.357757] omap2_set_init_voltage: unable to set vdd_core [ 2.363494] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.370727] omap2_set_init_voltage: unable to set vdd_iva [ 2.378570] Power Management for TI OMAP4+ devices. [ 2.383697] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.392150] ThumbEE CPU extension supported. [ 2.392150] Registering SWP/SWPB emulation handler [ 2.401733] SmartReflex Class3 initialized [ 2.414703] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc[0]' - status (0) [ 2.426422] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 2.433319] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.440460] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 2.450561] no flags found for reset [ 2.453369] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 2.461761] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 2.468933] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 2.478790] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 2.488586] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 2.495880] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 2.508239] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.527557] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.534698] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.543273] twl 0-0048: PIH (irq 327) nested IRQs [ 2.565673] VUSIM: failed to get the current voltage(-22) [ 2.574645] twl_reg 48070000.i2c:twl@48:regulator-vusim: can't register VUSIM, -22 [ 2.582794] twl_reg: probe of 48070000.i2c:twl@48:regulator-vusim failed with error -22 [ 2.601043] twl6040 0-004b: clk32k is not handled [ 2.612731] of_get_named_gpiod_flags: parsed 'ti,audpwron-gpio' property of node '/ocp/i2c@48070000/twl@4b[0]' - status (0) [ 2.627532] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.635345] omap_i2c 48060000.i2c: bus 2 rev0.11 at 400 kHz [ 2.644165] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.650756] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.650756] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.663909] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.673553] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.673706] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.690093] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.696228] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.702545] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.709503] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.719085] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.728607] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.735656] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.735687] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.750457] mmc0: new high speed SDHC card at address b368 [ 2.759094] mmcblk0: mmc0:b368 USD 3.76 GiB [ 2.767578] mmcblk0: p1 p2 [ 2.787750] omap_hsmmc 480d1000.mmc: GPIO lookup for consumer wp [ 2.787750] omap_hsmmc 480d1000.mmc: using device tree for GPIO lookup [ 2.801849] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d1000[0]' [ 2.811431] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d1000[0]' [ 2.820922] omap_hsmmc 480d1000.mmc: using lookup tables for GPIO lookup [ 2.827972] omap_hsmmc 480d1000.mmc: lookup for GPIO wp failed [ 2.877349] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.888122] mmc1: new high speed SDHC card at address 0007 [ 2.895477] mmcblk1: mmc1:0007 SD08G 7.42 GiB [ 2.902770] mmcblk1: p1 p2 [ 2.978210] hctosys: unable to open rtc device (rtc0) [ 2.978210] sr_init: No PMIC hook to init smartreflex [ 2.989715] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.998535] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.998535] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.058593] VAUX1_6030: disabling [ 3.064941] omap_hsmmc 480d1000.mmc: card claims to support voltages below defined range [ 3.064971] VDAC: disabling [ 3.065826] VANA: disabling [ 3.066650] VUSB: disabling [ 3.088500] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 3.110046] mmc2: new SDIO card at address 0001 [ 3.129028] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.138885] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 7.062805] EXT4-fs (mmcblk1p2): recovery complete [ 7.075988] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.084625] VFS: Mounted root (ext4 filesystem) readonly on device 179:10. [ 7.099151] devtmpfs: mounted [ 7.102844] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000) [ 7.406463] random: init urandom read with 30 bits of entropy available [ 7.429779] init: Failed to create pty - disabling logging for job [ 7.436309] init: Temporary process spawn error: No space left on device [ 7.487915] init: Failed to create pty - disabling logging for job [ 7.494659] init: Temporary process spawn error: No space left on device [ 7.523986] init: Failed to create pty - disabling logging for job [ 7.530700] init: Temporary process spawn error: No space left on device [ 7.541564] init: Failed to create pty - disabling logging for job [ 7.549743] init: Temporary process spawn error: No space left on device [ 7.629364] init: hwclock main process (84) terminated with status 1 [ 7.709228] init: ureadahead main process (85) terminated with status 5 [ 7.911285] init: Failed to create pty - disabling logging for job [ 7.918060] init: Temporary process spawn error: No space left on device [ 7.958160] init: Failed to create pty - disabling logging for job [ 7.964904] init: Temporary process spawn error: No space left on device [ 8.056365] init: Failed to create pty - disabling logging for job [ 8.062896] init: Temporary process spawn error: No space left on device [ 8.541259] udevd[140]: starting version 175 fsck from util-linux 2.20.1 [ 11.658935] init: udev-fallback-graphics main process (394) terminated with status 1 /dev/mmcblk1p2: clean, 177461/963584 files, 2993765/7708672 blocks [ 11.880157] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 11.900695] init: plymouth main process (86) killed by SEGV signal [ 11.919891] init: plymouth-splash main process (412) terminated with status 2 [ 11.935241] random: nonblocking pool is initialized mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed [ 12.541839] init: plymouth-log main process (490) terminated with status 1 [ 12.613189] init: failsafe main process (492) killed by TERM signal [ 13.354003] init: plymouth-upstart-bridge main process (538) terminated with status 1 [ 13.544006] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:577528k SS mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Plymouth command failed mountall: Disconnected from Plymouth speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 14.167480] init: bluetooth main process (546) terminated with status 1 [ 14.174743] init: bluetooth main process ended, respawning [ 14.299865] init: alsa-restore main process (583) terminated with status 19 [ 14.317352] init: hybrid-gfx main process (599) terminated with status 1 FATAL: Could not load /lib/modules/4.5.0-rc7-198739-gf6cede5/modules.dep: No such file or directory [ 15.090332] init: bluetooth main process (685) terminated with status 1 [ 15.098144] init: bluetooth main process ended, respawning [ 15.282165] init: bluetooth main process (702) terminated with status 1 [ 15.290283] init: bluetooth main process ended, respawning [ 15.471771] init: bluetooth main process (719) terminated with status 1 [ 15.480194] init: bluetooth main process ended, respawning [ 15.793182] init: bluetooth main process (735) terminated with status 1 [ 15.807067] init: bluetooth main process ended, respawning [ 16.194671] init: bluetooth main process (754) terminated with status 1 [ 16.204711] init: bluetooth main process ended, respawning Ubuntu 12.04.1 LTS variscite-desktop ttyO2 variscite-desktop login: [ 16.625274] init: lightdm main process (635) terminated with status 1 [ 16.650878] init: bluetooth main process (787) terminated with status 1 [ 16.661102] init: bluetooth main process ended, respawning [ 16.851318] init: bluetooth main process (805) terminated with status 1 [ 16.862426] init: bluetooth main process ended, respawning